A. Mehta

发表

Anomalous growth of Al8Mo3 phase during interdiffusion and reaction between Al and Mo

Le Zhou, Y. Sohn, A. Mehta, 2020, Journal of Nuclear Materials.

Mechanical properties examined by nanoindentation for selected phases relevant to the development of monolithic uranium-molybdenum metallic fuels

Y. Sohn, A. Mehta, D. Keiser, 2017 .

Microstructure, precipitates and mechanical properties of powder bed fused inconel 718 before and after heat treatment

B. McWilliams, Kyu C. Cho, Le Zhou, 2019, Journal of Materials Science & Technology.

Additive manufacturing and mechanical properties of the dense and crack free Zr-modified aluminum alloy 6061 fabricated by the laser-powder bed fusion

Le Zhou, H. Hyer, Y. Sohn, 2021 .

Simultaneous Measurement of Isotope-Free Tracer Diffusion Coefficients and Interdiffusion Coefficients in the Cu-Ni System

Y. Sohn, A. Mehta, I. Belova, 2018, Journal of Phase Equilibria and Diffusion.

Effects of Marker Size and Distribution on the Development of Kirkendall Voids, and Coefficients of Interdiffusion and Intrinsic Diffusion

Y. Sohn, A. Mehta, Sun Hong Park, 2019, Journal of Phase Equilibria and Diffusion.

Microstructural characteristics of plasma sprayed, electroplated, and co-rolled Zr diffusion barriers in hot isostatic pressed low enriched U-10 wt% Mo monolithic fuel plates

Y. Sohn, A. Mehta, D. Keiser, 2019, Journal of Nuclear Materials.

Martensitic transformation and mechanical properties of Ni49+xMn36–xIn15 (x=0, 0.5, 1.0, 1.5 and 2.0) alloys

Kyu C. Cho, Le Zhou, Y. Sohn, 2015 .

Interdiffusion and Reaction Between Al and Zr in the Temperature Range of 425 to 475 °C

Y. Sohn, A. Mehta, D. Keiser, 2019, Journal of Phase Equilibria and Diffusion.

Investigation of sluggish diffusion in FCC Al0.25CoCrFeNi high-entropy alloy

Y. Sohn, A. Mehta, 2021 .

Phase Transformations and Microstructural Development in the U-10 Wt Pct Mo Alloy with Varying Zr Contents After Heat Treatments Relevant to the Monolithic Fuel Plate Fabrication Process

Le Zhou, Y. Sohn, A. Mehta, 2018, Metallurgical and Materials Transactions A.

Interdiffusion and Reaction Between Al and Zr in the Temperature Range of 425 to 475 °C

Y. Sohn, A. Mehta, D. Keiser, 2019, Journal of Phase Equilibria and Diffusion.

High Entropy and Sluggish Diffusion "Core" Effects in Senary FCC Al-Co-Cr-Fe-Ni-Mn Alloys.

Y. Sohn, A. Mehta, 2020, ACS combinatorial science.

Composition-dependent interdiffusion coefficient, reduced elastic modulus and hardness in γ-, γ′- and β-phases in the Ni-Al system

Kyu C. Cho, Le Zhou, Y. Sohn, 2017 .

Composition-dependent solidification cracking of aluminum-silicon alloys during laser powder bed fusion

B. McWilliams, Kyu C. Cho, Le Zhou, 2021 .

Microstructural Characterization of AA6061 Versus AA6061 HIP Bonded Cladding–Cladding Interface

Le Zhou, Y. Sohn, A. Mehta, 2018 .

Interdiffusion, Reactions, and Phase Transformations Observed during Fabrication of Low Enriched Uranium Monolithic Fuel System for Research and Test Reactors

Y. Sohn, A. Mehta, R. Newell, 2018 .

Relating Diffusion Couple Experiment Results to Observed As-Fabricated Microstructures in Low-Enriched U-10wt.% Mo Monolithic Fuel Plates

Y. Sohn, A. Mehta, R. Newell, 2017 .

Fundamental Core Effects in Co-Cr-Fe-Ni Based High Entropy Alloys

A. Mehta, 2019 .

Effects of Alloy Composition and Solid-State Diffusion Kinetics on Powder Bed Fusion Cracking Susceptibility

Le Zhou, H. Hyer, Y. Sohn, 2020, Journal of Phase Equilibria and Diffusion.

High Strength Aluminum-Cerium Alloy Processed by Laser Powder Bed Fusion

B. McWilliams, H. Hyer, Y. Sohn, 2022, Additive Manufacturing.

Laser powder bed fusion of Al–10 wt% Ce alloys: microstructure and tensile property

B. McWilliams, Kyu C. Cho, Le Zhou, 2020, Journal of Materials Science.

Direct-Contact Cytotoxicity Evaluation of CoCrFeNi-Based Multi-Principal Element Alloys

Stephen J. Florczyk, Y. Sohn, A. Mehta, 2018, Journal of functional biomaterials.

Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment

B. McWilliams, Kyu C. Cho, Le Zhou, 2018, Materials Characterization.

Interdiffusion and reaction between U and Zr

Y. Sohn, A. Mehta, D. Keiser, 2018 .

Elimination of extraordinarily high cracking susceptibility of aluminum alloy fabricated by laser powder bed fusion

S. Thapliyal, R. Mishra, Le Zhou, 2021, Journal of Materials Science & Technology.

Microstructural characteristics and mechanical properties of additively manufactured Cu–10Sn alloys by laser powder bed fusion

H. Hyer, Y. Sohn, A. Mehta, 2022, Materials Science and Engineering: A.

Stabilization of Sn Anode through Structural Reconstruction of a Cu–Sn Intermetallic Coating Layer

Y. Sohn, Yang Yang, A. Kushima, 2020, Advanced materials.

Measurement of Interdiffusion and Tracer Diffusion Coefficients in FCC Co-Cr-Fe-Ni Multi-Principal Element Alloy

Y. Sohn, A. Mehta, I. Belova, 2021, Journal of Phase Equilibria and Diffusion.

Effect of Thermodynamic Stability Parameters on Tracer Diffusion Kinetics in High Entropy Alloys

Y. Sohn, A. Mehta, 2022, Journal of Phase Equilibria and Diffusion.

Interdiffusion, Solubility Limit, and Role of Entropy in FCC Al-Co-Cr-Fe-Ni Alloys

Y. Sohn, A. Mehta, 2020, Metallurgical and Materials Transactions A.

Fundamental Core Effects in Transition Metal High-Entropy Alloys: “High-Entropy” and “Sluggish Diffusion” Effects

Y. Sohn, A. Mehta, 2021 .

Microstructural Development in Inconel 718 Nickel-Based Superalloy Additively Manufactured by Laser Powder Bed Fusion

Le Zhou, H. Hyer, Y. Sohn, 2022, Metallography, Microstructure, and Analysis.

Microstructure, mechanical performance, and corrosion behavior of additively manufactured aluminum alloy 5083 with 0.7 and 1.0 wt% Zr addition

Le Zhou, H. Hyer, Y. Sohn, 2021, Materials Science and Engineering: A.

Mechanical Behavior Assessment of Ti-6Al-4V ELI Alloy Produced by Laser Powder Bed Fusion

Le Zhou, H. Hyer, Y. Sohn, 2021, Metals.

Laboratory-Scale Development of Lead-Lithium Eutectic Alloy by Magnetohydrodynamic Stirring Technique

A. Mehta, P. Chakraborty, E. Rajendrakumar, 2014 .

Tensile behavior of diffusion bonded AA6061 - AA6061 with variation in cooling method

Y. Sohn, A. Mehta, Jeongmin Woo, 2023, Materials Science and Engineering: A.

Microstructural Characterization of AA6061 Versus AA6061 HIP Bonded Cladding–Cladding Interface

Le Zhou, Y. Sohn, A. Mehta, 2018, Journal of Phase Equilibria and Diffusion.

Effects of Marker Size and Distribution on the Development of Kirkendall Voids, and Coefficients of Interdiffusion and Intrinsic Diffusion

Y. Sohn, A. Mehta, Sun Hong Park, 2019, Journal of Phase Equilibria and Diffusion.

SANITIZATION OF PUBLIC PLACES IN COVID19 ERA : A COMPARISON OF INDIAN AND AMERICAN MUNICIPAL PRACTICES

T. Basavaraj, A. Mehta, Kunal Chatterjee, 2021 .

Anode Materials: Stabilization of Sn Anode through Structural Reconstruction of a Cu–Sn Intermetallic Coating Layer (Adv. Mater. 42/2020)

Y. Sohn, Yang Yang, A. Kushima, 2020 .

Phase reversion kinetics of thermally decomposed (α + γ′) phases to γ-phase in U – 10 wt% Mo alloy

Y. Sohn, A. Mehta, D. Keiser, 2020 .

Elimination of Extraordinarily High Cracking Susceptibility of Elimination of Extraordinarily High Cracking Susceptibility of Aluminum Alloy Fabricated by Laser Powder Bed Fusion Aluminum Alloy Fabricated by Laser Powder Bed Fusion

R. Mishra, H. Hyer, A. Mehta, 2022 .