V. Soni

发表

Refractory high entropy superalloys (RSAs)

R. Banerjee, D. Miracle, O. Senkov, 2020 .

A Combinatorial Approach for Assessing the Magnetic Properties of High Entropy Alloys: Role of Cr in AlCoxCr1–xFeNi

D. Choudhuri, R. Banerjee, V. Chaudhary, 2017 .

Temperature dependent deformation behavior and strengthening mechanisms in a low density refractory high entropy alloy Al10Nb15Ta5Ti30Zr40

R. Banerjee, O. Senkov, V. Soni, 2020, Materialia.

Phase stability and microstructure evolution in a ductile refractory high entropy alloy Al10Nb15Ta5Ti30Zr40

Yufeng Zheng, R. Banerjee, B. Gwalani, 2020 .

Phase inversion in a two-phase, BCC+B2, refractory high entropy alloy

Yufeng Zheng, R. Banerjee, T. Alam, 2020 .

Recovery of cold-worked Al0.3CoCrFeNi complex concentrated alloy through twinning assisted B2 precipitation

D. Choudhuri, R. Banerjee, S. Dasari, 2021 .

Role of copper on L12 precipitation strengthened fcc based high entropy alloy

M. L. Young, Yufeng Zheng, R. Banerjee, 2019, Materialia.

Stability of ordered L12 and B2 precipitates in face centered cubic based high entropy alloys - Al0.3CoFeCrNi and Al0.3CuFeCrNi2

D. Choudhuri, R. Banerjee, S. Hong, 2016 .

Engineering multi-scale B2 precipitation in a heterogeneous FCC based microstructure to enhance the mechanical properties of a Al0.5Co1.5CrFeNi1.5 high entropy alloy

R. Banerjee, S. Dasari, S. Gorsse, 2020 .

Highly Complex Magnetic Microstructures in Hierarchically Phase Separated AlCo(Cr)FeNi High-entropy Alloys

R. Banerjee, V. Chaudhary, R. Ramanujan, 2020 .

Influence of Cr Substitution and Temperature on Hierarchical Phase Decomposition in the AlCoFeNi High Entropy Alloy

R. Banerjee, V. Chaudhary, R. Ramanujan, 2018, Scientific Reports.

Contrasting mechanical behavior in precipitation hardenable AlXCoCrFeNi high entropy alloy microstructures: Single phase FCC vs. dual phase FCC-BCC

R. Banerjee, R. Mishra, B. Gwalani, 2019, Materials Science and Engineering: A.

Fine scale alpha precipitation in Ti-19at.%v in the absence of influence from omega precipitates

H. Fraser, S. Mantri, S. Dasari, 2021 .

Laser additive manufacturing of compositionally graded AlCrFeMoVx (x = 0 to 1) high-entropy alloy system

R. Banerjee, S. Mantri, B. Gwalani, 2019, Optics & Laser Technology.

Discontinuous precipitation leading to nano-rod intermetallic precipitates in an Al0.2Ti0.3Co1.5CrFeNi1.5 high entropy alloy results in an excellent strength-ductility combination

R. Banerjee, S. Dasari, S. Gorsse, 2020 .

Phase stability as a function of temperature in a refractory high-entropy alloy

R. Banerjee, T. Alam, D. Miracle, 2018, Journal of Materials Research.

Microstructural Design for Improving Ductility of An Initially Brittle Refractory High Entropy Alloy

R. Banerjee, D. Miracle, B. Gwalani, 2018, Scientific Reports.

Concomitant Clustering and Ordering Leading to B2 + BCC Microstructures in Refractory High Entropy Alloys

H. Fraser, S. Dasari, D. Miracle, 2022, Transactions of the Indian Institute of Metals.

Tuning the degree of chemical ordering in the solid solution of a complex concentrated alloy and its impact on mechanical properties

R. Banerjee, M. Nartu, S. Dasari, 2021 .

The evolution of microstructure and microhardness in a biomedical Ti–35Nb–7Zr–5Ta alloy

D. Choudhuri, R. Banerjee, Yang Ren, 2017, Journal of Materials Science.

Phase Stability and Microstructural Evolution in a Ductile Refractory High Entropy Alloy Al 10Nb 15Ta 5Ti 30Zr 40

Yufeng Zheng, R. Banerjee, B. Gwalani, 2019, SSRN Electronic Journal.

High density of strong yet deformable intermetallic nanorods leads to an excellent room temperature strength-ductility combination in a high entropy alloy

R. Banerjee, R. Mishra, Priyanshi Agrawal, 2021 .

Hierarchical Eutectoid Nano-lamellar Decomposition in an Al0.3CoFeNi Complex Concentrated Alloy

R. Banerjee, S. Dasari, S. Gorsse, 2020, Scientific Reports.

Influence of ordered L12 precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy

Yufeng Zheng, R. Banerjee, R. Mishra, 2019, Scientific Reports.

Cu assisted stabilization and nucleation of L1 2 precipitates in Al 0.3 CuFeCrNi 2 fcc-based high entropy alloy

D. Choudhuri, R. Banerjee, Yang Ren, 2017 .

Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0.3CoCrFeNi high entropy alloy

Yang Ren, Rajarshi Banerjee, Bharat Gwalani, 2017 .

Laser Additive Manufacturing of Magnetic Materials

V. Chaudhary, Rajarshi Banerjee, Raju V. Ramanujan, 2017 .

Laser additive processing of Ni-Fe-V and Ni-Fe-Mo Permalloys: Microstructure and magnetic properties

D. Choudhuri, R. Banerjee, V. Chaudhary, 2017 .

Tuning the phase stability and magnetic properties of laser additively processed Fe-30at%Ni soft magnetic alloys

V. Chaudhary, Rajarshi Banerjee, Raju V. Ramanujan, 2017 .

Influence of Cr Substitution and Temperature on Hierarchical Phase Decomposition in the AlCoFeNi High Entropy Alloy

R. Banerjee, V. Chaudhary, R. Ramanujan, 2018, Scientific Reports.

Highly tunable magnetic and mechanical properties in an Al0.3CoFeNi complex concentrated alloy

R. Banerjee, V. Chaudhary, R. Ramanujan, 2020 .

Influence of Non-magnetic Cu on Enhancing the Low Temperature Magnetic Properties and Curie Temperature of FeCoNiCrCu(x) High Entropy Alloys

R. Banerjee, V. Chaudhary, R. Ramanujan, 2020, Scripta Materialia.

Engineering transformation pathways in an Al0.3CoFeNi complex concentrated alloy leads to excellent strength–ductility combination

R. Banerjee, S. Dasari, S. Gorsse, 2020 .

Correction to: Laser Additive Manufacturing of Magnetic Materials

D. Jaeger, R. Banerjee, V. Chaudhary, 2017 .

Influence of ordered L12 precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy

Yufeng Zheng, R. Banerjee, R. Mishra, 2019, Scientific Reports.

Deformation Twinning in a Metal-Intermetallic System: Novel Paradigm for Designing Alloys with Exceptional Strength-Ductility Combination

R. Mishra, Priyanshi Agrawal, S. Dasari, 2020 .

Crystallographic and Compositional Evolution of Ordered B2 and Disordered BCC Phases During Isothermal Annealing of Refractory High-Entropy Alloys.

H. Fraser, R. Banerjee, S. Dasari, 2022, Microscopy and microanalysis : the official journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada.