S. Varma

发表

A comparison of the effect of Cr and Al additions on the oxidation behaviour of alloys from the Nb–Cr–Si system

N. Esparza, V. Rangel, A. Gutiérrez, 2016 .

A Comparison of Static and Cyclic Long-Term Oxidation of Two Nb-Cr-Mo-Si-B Alloys

S. Varma, K. Thomas, 2013, Metallurgical and Materials Transactions A.

The control of grain size and distribution of particles in a (6061 alloym/(Al2O3)P composite by solutionizing treatment

D. Salas, S. Varma, Javier Ponce, 1996 .

Static and cyclic oxidation of Nb-Cr-V-W-Ta high entropy alloy in air from 600 to 1400 °C

C. Ramana, S. Varma, Sanchez Francelia, 2020, Journal of Materials Science & Technology.

Comparison of in situ oxidation between Ti-44AI and Ti-44AI-11Nb alloys below 400 °C

P. W. Wang, S. Varma, M. Avila, 2002 .

Oxidation Behavior of Nb-20Mo-15Si-25Cr and Nb-20Mo-15Si-25Cr-5B Alloys

S. Varma, Benedict I. Portillio, 2011, Metallurgical and Materials Transactions A.

Oxidation behavior and transmission electron microscope characterization of Ti-44Al-x Nb-2(Ta,Zr) alloys

S. Varma, R. Mahapatra, J. C. Woo, 2003 .

The effect of indenter shape on the transient current response and surface microstructures in Fe-16wt.% Cr-16wt.%Ni alloy

S. Varma, A. Bronson, J. C. Arroyo, 1992 .

Effect of grain size on deformation-induced martensite formation in 304 and 316 stainless steels during room temperature tensile testing

S. Varma, V. Srinivas, V. Srinivas, 1994 .

Oxidation response of three Nb–Cr–Mo–Si–B alloys in air

S. Varma, K. Thomas, 2015 .

Correlation between Microstructures and Oxidation Resistance in Zr-Nb-Ti Alloys

S. Varma, C. Parga, 2009 .

High temperature oxidation characteristics of Nb–10W–XCr alloys

M. Moricca, S. Varma, 2010 .

Isothermal oxidation behaviour of Nb-W-Cr Alloys

M. Moricca, S. Varma, 2010 .

Short-term oxidation response of Nb-15Re-15Si-10Cr-20Mo alloy

S. Varma, Ruth Melody Dasary, 2014 .

Oxidation behavior of Nb–20Mo–15Si–5B–20Ti alloy in air from 700 to 1300 °C

S. Varma, B. Portillo, 2010 .

Influence of processing on microstructures of Ti-44Al-11Nb alloy

Erica L. Corral, S. Varma, R. Mahapatra, 1999 .

Characterization of microstructures and oxidation behaviour of Nb-20Si-20Cr-5Al alloy

S. Varma, D. Álvarez, 2011 .

High-temperature oxidation behavior of Nb–Si–Cr alloys with Hf additions

S. Varma, A. Vázquez, 2011 .

Microstructures and high temperature oxidation resistance of alloys from Nb–Cr–Si system

K. Amato, Jennifer Hernandez, S. Varma, 2010 .

Corrosive wear behavior of 2014 and 6061 aluminum alloy composites

S. Varma, G. Vasquez, S. Andrews, 1999 .

Effects of Mo/Si Ratio Inversion on the Oxidation of Nb-Cr-Mo-Si-B Alloys

S. Varma, K. Thomas, 2015 .

Microstructures in a Nb-Cr-V-W-Ta high entropy alloy during annealing

C. Ramana, S. Varma, F. Sánchez, 2020 .

Short-Term Oxidation Response of Nb–15Re–15Si–20Cr–15Ti Alloy

S. Varma, Ruth M. Dasary-Sierra, 2014, Metallography, Microstructure, and Analysis.

High Temperature Alloys from Nb-Cr-Si System with Minor Additions

S. Varma, A. Vázquez, Benedict I. Portillio, 2010 .

Heat Treatment and Oxidation Characteristics of Nb-20Mo-15Si-5B-20(Cr,Ti) Alloys from 700 to 1400°C

K. Amato, S. Varma, S. Natividad, 2010 .

Short-term oxidation response of Nb – 15 Re – 15 Si – 10 Cr – 20 Mo alloy

S. Varma, Ruth Melody Dasary, 2018 .

Oxidation resistant NbCr2 phase in Nb-W-Cr system

S. Varma, B. Portillo, J. Ventura, 2009 .

The high-temperature oxidation characteristics of alloys from the Nb-W-Cr system with C additions

M. Moricca, S. Varma, 2008 .

The possible application of Nb-W-Cr alloys in high-temperature air

S. Varma, B. Portillo, P. Kakarlapudi, 2007 .

Oxidation Behavior of Nb-20Mo-15Si-5B-20Cr and Nb-20Mo-15Si-5B-20Ti Alloys Up To 1300{degree sign}C

S. Varma, R. Mahapatra, B. Portillo, 2009 .

Static and Cyclic Oxidation of Ti–44Al and Ti–44Al–xNb Alloys

S. Varma, B. Mahapatra, A. Chan, 2001 .

Strain-rate and grain-size effect on substructures and mechanical properties in OFHC copper during tension

S. Varma, H. Shankaranarayan, 1995, Journal of Materials Science.

Effect of strain rate on dislocation cell size and Hall-Petch-type relationship at various strain levels during a uniaxial tensile test in electrical conductor aluminium

S. Varma, Y. Chao, 1991 .

The effect of stacking fault energy on the microstructural development during room temperature wire drawing in Cu, Al and their dilute alloys

Javier Ponce, D. Salas, S. Varma, 1996 .

Vacancy versus pipe diffusion mechanisms for subgrain growth in OFHC copper

S. Varma, Chang Chung-Min, 1989 .

Effect of stacking fault energy and strain rate on the microstructural evolution during room temperature tensile testing in Cu and Cu-Al dilute alloys

S. Varma, V. Caballero, 1999 .

The effect of grain size and strain rate on the

J. Rao, S. Varma, S. K. Varma, 1993, Metallurgical and Materials Transactions A.

Structure-sensitive properties during room-temperature wire drawing at various speeds in nickel 200

S. Varma, S. Mehta, 1992 .

The effect of impact and continuous scratches on the corrosive wear behavior of Fe-18%Cr-5%Ni alloy and 304 stainless steel for two grain sizes

S. Varma, R. Romero, 1996 .

In situ surface oxidation of Ti-44Al-11Nb alloy at room temperature

P. W. Wang, S. Varma, A. Bronson, 2003 .

Solutionizing effects during corrosive wear in 6061 aluminum and composites

S. Varma, S. Andrews, 1997 .

The effect of electrolyte strength and grain size on the transient current response in Fe-Cr-Ni alloys during a scratch test

S. Varma, V. Caballero, Monica M. de Lugo, 1994 .

Influence of near-surface microstructures on the transient current response in Fe-Cr-Ni alloys during scratch tests

S. Varma, A. Bronson, A. Advani, 1994 .

The surface morphology and transient current response of Fe-16 wt% Cr-16 wt% Ni in a scratch test

S. Varma, A. Bronson, J. Carlos Arroyo, 1991 .

Corrosive wear behavior of 7075 aluminum alloy and its composite containing Al2O3 particles

S. Varma, G. Vasquez, 2003 .

Wettability Analysis of Orthopaedic Materials Using Optical Contact Angle Methods

F. Namavar, S. Varma, G. Hunter, 2006 .

Metal Dusting and Oxidation at 593 and 704°C

Z. Zeng, S. Varma, K. Natesan, 2007 .

Effect of Ta and Zr additions on the oxidation characteristics of Ti-44Al-xNb alloys

S. Varma, R. Mahapatra, J. C. Woo, 2003 .

The oxidation resistance of Nb-20Mo-15Si-5B-20Cr up to 1,300°C

S. Varma, J. Ventura, S. K. Varma, 2009 .

Microstructural characterization, oxidation behavior, and properties of a new Al-Cu-Ni-Mn-Si non-BCC high entropy alloy at 600, 700, and 800oC

S. Varma, Mckenna Mae Lin Hitter, 2023, Journal of Materials Research and Technology.

Development of an empirical model for subgrain growth in Al-0.6Fe alloy, aluminium, copper and nickel during recovery

S. Varma, M. Tseng, 1992, Journal of Materials Science.

Effect of prior cold work amount and annealing temperature on subgrain growth in nickel during recovery

S. Varma, Hong Zhu, 1991 .

Effects of the amount of prior cold work and annealing temperature on subgrain growth in Al0.2Mg alloy

S. Varma, 1986 .

Effect of annealing temperature on subgrain growth during recovery in oxygen-free high conductivity copper

S. Varma, Chung-Min Chang, J. R. Serrano, 1988 .