Kun Yu

发表

Discharge behavior and electrochemical properties of Mg–Al–Sn alloy anode for seawater activated battery

L. Wen, Kun Yu, Hanqing Xiong, 2015 .

Effects of grain refinement on mechanical properties and microstructures of AZ31 alloy

Kun Yu, Shou-tai Rui, Juemin Song, 2008 .

In vitro and in vivo evaluation of novel biodegradable Mg-Ag-Y alloys for use as resorbable bone fixation implant.

Z. Li, Kun Yu, Yilong Dai, 2018, Journal of biomedical materials research. Part A.

Texture evolution of extruded AZ31 magnesium alloy sheets

Ri-chu Wang, Kun Yu, Shou-tai Rui, 2009 .

Investigation on the microstructure, mechanical properties, in vitro degradation behavior and biocompatibility of newly developed Zn-0.8%Li-(Mg, Ag) alloys for guided bone regeneration.

Ding Li, Xuemei Xu, Kun Yu, 2019, Materials science & engineering. C, Materials for biological applications.

Evaluation of the mechanisms and effects of Mg-Ag-Y alloy on the tumor growth and metastasis of the MG63 osteosarcoma cell line.

Z. Xiong, Xuemei Xu, Z. Li, 2019, Journal of biomedical materials research. Part B, Applied biomaterials.

Effects of Gd and Nd on microstructure, corrosion behavior, and electrochemical performance of Mg-Y-based anodes for magnesium air batteries

Z. Huang, Xin Chu, Xiaohan Wu, 2020, Journal of Applied Electrochemistry.

Effects of Heat Treatment on the Discharge Behavior of Mg-6wt.%Al-1wt.%Sn Alloy as Anode For Magnesium-Air Batteries

Jie Luo, Kun Yu, Hanqing Xiong, 2017, Journal of Materials Engineering and Performance.

Effects of microstructure on the electrochemical discharge behavior of Mg-6wt%Al-1wt%Sn alloy as anode for Mg-air primary battery

Kun Yu, Hanqing Xiong, Yilong Dai, 2017 .

Microstructure and Discharge Behavior of Mg-Al-Sn-In Anode Alloys

Kun Yu, Hanqing Xiong, Yilong Dai, 2017 .

Bonding Process and Application Properties of an Al-Ni Layer Composite Sheet for Lithium-ion Battery Packaging

Kun Yu, Wen Li, Xiong Hanqing, 2016 .

Effects of Al and Sn on electrochemical properties of Mg-6%Al-1%Sn (mass fraction) magnesium alloy as anode in 3.5%NaCl solution

L. Wen, Kun Yu, Yilong Dai, 2014 .

In vitro and in vivo assessment of the effect of biodegradable magnesium alloys on osteogenesis.

C. Wen, Yuncang Li, Ding Li, 2021, Acta biomaterialia.

A Potential Biodegradable Mg-Y-Ag Implant with Strengthened Antimicrobial Properties in Orthopedic Applications

Yong Zhu, Zhenhua Luo, Xuemei Xu, 2018, Metals.

Effects of Zn concentration and heat treatment on the microstructure, mechanical properties and corrosion behavior of as-extruded Mg-Zn alloys produced by powder metallurgy

Jie Luo, Tao Xiao, Kun Yu, 2017 .

Comparison of the microstructure and properties of a series of Mg-Zn metallic devices on biomedical applications

Kun Yu, Yilong Dai, Yu Zhang, 2019 .

In vitro corrosion behavior and cytotoxicity property of magnesium matrix composite with chitosan coating

Kun Yu, Yilong Dai, Xue-yan Qiao, 2015 .

Mg-Zn-Mn alloy extract induces the angiogenesis of human umbilical vein endothelial cells via FGF/FGFR signaling pathway.

Kun Yu, Yilong Dai, Q. Yuan, 2019, Biochemical and biophysical research communications.

Effects of Interface Structures on the Application Properties of Ni/Al Clad Composite

Kun Yu, Juemin Song, Shaojun Li, 2011 .

Biodegradation Performance of Magnesium Matrix Composite as a Biomedical Implant

Kun Yu, Yilong Dai, Yu Zhang, 2017 .

Microstructure and Mechanical Properties of AA1235 Aluminum Foil Stocks Produced Directly from Electrolytic Aluminum Melt

L. Wen, Zhifeng Wang, Kun Yu, 2016, Metallurgical and Materials Transactions B.

Effect of porous titanium coated with IGF-1 and TGF-β1 loaded gelatin microsphere on function of MG63 cells

Kun Yu, Xue-yan Qiao, Jun Cao, 2015 .

Effects of alloying elements on the electrochemical behaviors of Al-Mg-Ga-In based anode alloys

Kun Yu, Yilong Dai, Hui Liu, 2019, International Journal of Hydrogen Energy.

Effects of chitosan coating on biocompatibility of Mg–6%Zn–10%Ca3(PO4)2 implant

Zhiming Yu, Kun Yu, Yilong Dai, 2015 .

Synthesis of Ag-La0.8Sr0.2MnO3 (LSM-Ag) Composite Powder and Its Application in Magnesium Air Battery

Wanli Xu, Xiaohan Wu, Kun Yu, 2021, Metals.

Microstructure effects on the electrochemical corrosion properties of Mg – 4.1% Ga – 2.2% Hg alloy as the anode for seawater-activated batteries

Kun Yu, X. Tan, Shaojun Li, 2011 .

Effect of SiCp particle size and anneal on properties of Al/SiC composites prepared by powder liquid -phase sintering

Kun Yu, Yilong Dai, F. Teng, 2015, 2015 16th International Conference on Electronic Packaging Technology (ICEPT).

Effects of gallium on electrochemical discharge behavior of Al–Mg–Sn–In alloy anode for air cell or water-activated cell

L. Wen, Kun Yu, Hanqing Xiong, 2015 .

Effects of Heat Treatment on Microstructure, Mechanical Properties, Corrosion Resistance and Cytotoxicity of ZM21 Magnesium Alloy as Biomaterials

Ding Li, Kun Yu, Yilong Dai, 2018, Journal of Materials Engineering and Performance.

Improvement of the mechanical properties and corrosion resistance of biodegradable β-Ca3(PO4)2/Mg-Zn composites prepared by powder metallurgy: the adding β-Ca3(PO4)2, hot extrusion and aging treatment.

Kun Yu, Hanqing Xiong, Yilong Dai, 2017, Materials science & engineering. C, Materials for biological applications.

Microstructure, Mechanical Properties and Corrosion Behavior of Porous Mg-6 wt.% Zn Scaffolds for Bone Tissue Engineering

Ding Li, Tao Xiao, Kun Yu, 2018, Journal of Materials Engineering and Performance.

Constitutive analysis of AZ31 magnesium alloy plate

Z. Cai, Kun Yu, Wen-xian Li, 2010 .

Evolution of texture, microstructure, tensile strength and corrosion properties of annealed Al–Mg–Sc–Zr alloys

D. Wang, Kun Yu, Hui Liu, 2020 .

Microstructural and textural evolution of Al-4.5Mg-0.7Mn-0.2Sc alloys during hot rolling

Y. Li, Kun Yu, Hui Liu, 2021 .

Plastic deformation behaviors of a Mg–Ce–Zn–Zr alloy

Ri-chu Wang, Kun Yu, Zheng-qing Ma, 2003 .

Effects of polycaprolactone coating on the biodegradable behavior and cytotoxicity of Mg-6%Zn-10%Ca3(PO4)2 composite in simulated body fluid

Ding Li, Kun Yu, Yilong Dai, 2017 .

Research on corrosion behavior and biocompatibility of a porous Mg–3%Zn/5%β-Ca3(PO4)2 composite scaffold for bone tissue engineering

C. Shuai, Kun Yu, Youwen Deng, 2019, Journal of applied biomaterials & functional materials.

In vitro corrosion behavior and in vivo biodegradation of biomedical β-Ca3(PO4)2/Mg-Zn composites.

Zhiming Yu, Kun Yu, Yilong Dai, 2012, Acta biomaterialia.

Effect of T5 and T6 Tempers on a Hot-Rolled WE43 Magnesium Alloy

C. Li, Ri-chu Wang, Kun Yu, 2008 .

Biodegradable Behaviors of Mg-6%Zn-5%Hydroxyapatite Biomaterial

Zhiming Yu, Kun Yu, Liang-jian Chen, 2011 .

In vivo biocompatibility and biodegradation of a Mg-15%Ca3(PO4)2 composite as an implant material

Kun Yu, Yilong Dai, Liang-jian Chen, 2013 .

Mechanical properties and biodegradable behavior of Mg–6%Zn–Ca3(PO4)2 metal matrix composites in Ringer's solution

Kun Yu, Shaojun Li, Liang-jian Chen, 2012 .

Discharge behavior of Mg–4 wt%Ga–2 wt%Hg alloy as anode for seawater activated battery

Zhiming Yu, Kun Yu, X. Tan, 2011 .

Production and Properties of a Spray Formed 70%Si-Al Alloy for Electronic Packaging Applications

Ri-chu Wang, Kun Yu, Jun Yang, 2008 .

Microstructures and properties of Al–50%SiC composites for electronic packaging applications

Jie Luo, Kun Yu, Hanqing Xiong, 2016 .

Enhanced osteoinductivity and corrosion resistance of dopamine/gelatin/rhBMP-2–coated β-TCP/Mg-Zn orthopedic implants: An in vitro and in vivo study

Chengde Gao, Jingcheng Wang, Kun Yu, 2020, PloS one.

Microstructure Evolution and Mechanical Properties Improvement in Liquid-Phase-Sintered Hydroxyapatite by Laser Sintering

Shuping Peng, Tao Xiao, Cijun Shuai, 2015, Materials.

Improving of in vitro Biodegradation Resistance in a Chitosan Coated Magnesium Bio-composite

Y. Zhiming, Kun Yu, Zhao Jun, 2015 .

A homogenous microstructural Mg-based matrix model for orthopedic application with generating uniform and smooth corrosion product layer in Ringer's solution: Study on biodegradable behavior of Mg-Zn alloys prepared by powder metallurgy as a case

Ding Li, Tao Xiao, Xuemei Xu, 2020 .

Mechanical and structural characterization of diopside scaffolds reinforced with graphene

C. Shuai, Chengde Gao, S. Peng, 2016 .

Crystallography of Mg2Sn precipitates in Mg-Sn-Mn-Si alloy

Min Zhang, Kun Yu, Wen-Zheng Zhang, 2007 .

In vitro corrosion behavior and cytotoxicity property of magnesium matrix composite with chitosan coating

Kun Yu, Yilong Dai, Xue-yan Qiao, 2015, Journal of Central South University.

Effects of Strontium addition on microstructure, mechanical properties, corrosion properties and cytotoxicity of Mg–1Zn–1Mn alloy

Kun Yu, Yilong Dai, Yu Zhang, 2019, Materials Research Express.

Effects of the Intermetallic Phases on Microstructure and Properties of Biodegradable Magnesium Matrix and Zinc Matrix Prepared by Powder Metallurgy

Xuemei Xu, Kun Yu, Yilong Dai, 2018, MATERIALS TRANSACTIONS.

Composition optimization and electrochemical properties of Mg-Al-Pb-(Zn) alloys as anodes for seawater activated battery

L. Wen, Kun Yu, Hanqing Xiong, 2016 .

Mechanical strengthening mechanism of Zn-Li alloy and its mini tube as potential absorbable stent material

Ding Li, Xuemei Xu, Kun Yu, 2019, Materials Letters.

Influence of Ga and Hg on microstructure and electrochemical corrosion behavior of Mg alloy anode materials

C. Peng, Ri-chu Wang, Yan Feng, 2007 .

LOC103691336/miR‐138‐5p/BMPR2 axis modulates Mg‐mediated osteogenic differentiation in rat femoral fracture model and rat primary bone marrow stromal cells

Kun Yu, Yilong Dai, Hui Li, 2019, Journal of cellular physiology.

Activation of Mg–Hg anodes by Ga in NaCl solution

C. Peng, Ri-chu Wang, Yan Feng, 2009 .

Influence of Ga Content on Electrochemical Behavior of Mg-5 at%Hg Anode Materials

C. Peng, Yan Feng, Kun Yu, 2008 .

Fabrication and characterization of A Zn-0.5Fe alloy membrane by powder metallurgy route for guided bone regeneration

Y. Liu, Kun Yu, Jiefeng Huang, 2022, Materials Research Express.

Effects of intermetallic phases on electrochemical properties of powder metallurgy Mg-6%Al-5%Pb anode alloy used for seawater activated battery

Kun Yu, Xuehua He, Juemin Song, 2022, Materials Research Express.

Microstructure characterization and thermal properties of hypereutectic Si–Al alloy for electronic packaging applications

Kun Yu, Shao-jun Li, Li-san Chen, 2012 .

The effects of rolling deformation on Al-27%Si alloys prepared by powder metallurgy for electronic packaging applications

Kun Yu, Hanqing Xiong, Yilong Dai, 2015, 2015 16th International Conference on Electronic Packaging Technology (ICEPT).

Manufacturing process and electrochemical properties of an Mg–Ga–Hg anode sheet

Kun Yu, Shaojun Li, Yanan Hu, 2012 .

Mechanical properties and microstructure of aluminum alloy 2618 with Al3(Sc, Zr) phases

Songru Li, Kun Yu, Wen-xian Li, 2004 .

Compressive properties and energy absorption characteristics of open-cell nickel foams

Kun Yu, Hanqing Xiong, Yilong Dai, 2017 .

Effects of ultrasonic treatment on the tensile properties and microstructure of twin roll casting Mg–3%Al–1%Zn–0.8%Ce–0.3%Mn (wt%) alloy strips

Kun Yu, Jian-ping Li, D. Mao, 2011 .

Determination of isothermal sections of the Co-Nb-Ni and Ni-Mo-Re ternary systems

Ri-chu Wang, Yan Feng, Kun Yu, 2008 .

Recrystallization Behavior in an Al-Cu-Mg-Fe-Ni Alloy with Trace Scandium and Zirconium

Songru Li, Kun Yu, Wen-xian Li, 2000 .

Mechanical Properties and Formability of Ultrasonic Treated Twin Roll Casting Magnesium Alloy Sheet

Kun Yu, Wen Li, Xiong Hanqing, 2017 .

Effect of trace Sc and Zr on the mechanical properties and microstructure of Al alloy 2618

Songru Li, Kun Yu, Wen-xian Li, 2009 .

Electrochemical behavior of Mg-Al-Pb alloy in 3.5% NaCl solution

L. Wen, Kun Yu, Hanqing Xiong, 2016 .

Electrochemical behavior of Mg-Al-Pb alloy in 3.5% NaCl solution

L. Wen, Kun Yu, Hanqing Xiong, 2016, Journal of Central South University.

Electrochemical properties of magnesium alloy anodes discharged in seawater

Kun Yu, Qiao Huang, Jun Zhao, 2012 .

Production, Properties and Microstructures of Mg-RE-Zn-Zr (RE=MM, Nd) Alloy

Songru Li, Kun Yu, Wen-xian Li, 2009 .

Corrosion and Discharge Behaviors of Al-Mg-Sn-Ga-In in Different Solutions

Kun Yu, Hanqing Xiong, Yilong Dai, 2016, Journal of Materials Engineering and Performance.

Microstructure, Corrosion Behaviors in Different Simulated Body Fluids and Cytotoxicity of Zn–Li Alloy as Biodegradable Material

Ding Li, Tao Xiao, Xuemei Xu, 2019, MATERIALS TRANSACTIONS.

Biodegradation performance of a chitosan coated magnesium-zinc-tricalcium phosphate composite as an implant.

Kun Yu, Yilong Dai, Xue-yan Qiao, 2014, Biointerphases.

Effects of Extrusion and Rolling Processes on the Microstructure and Mechanical Properties of Zn-Li-Ag Alloys

Y. Liu, Kun Yu, Yilong Dai, 2022, Metals.