Junsheng Wang

发表

Quantifying the effects of cooling rates and alloying additions on the microporosity formation in Al alloys

Bin Wang, Mingshan Zhang, Junsheng Wang, 2021 .

Quantifying the Influences of Carbides and Porosities on the Fatigue Crack Evolution of a Ni-Based Single-Crystal Superalloy using X-ray Tomography

Yi-zhou Zhou, Yan-hong Yang, Junsheng Wang, 2021, Acta Metallurgica Sinica (English Letters).

Low serum vitamin D concentration is correlated with anemia, microinflammation, and oxidative stress in patients with peritoneal dialysis

Dong Sun, Junsheng Wang, Chi Zhang, 2021, Journal of translational medicine.

Thermal Stability and Mechanical Properties of Low-Activation Single-Phase Ti-V-Ta Medium Entropy Alloys

Benpeng Wang, Yunfei Xue, Xuan Liu, 2019, JOM.

Influence of melt flow in the gating system on microstructure and mechanical properties of high pressure die casting AZ91D magnesium alloy

S. Xiong, Junsheng Wang, Wenbo Yu, 2018, Materials Science and Engineering: A.

In-situ X-ray tomography investigation of pore damage effects during a tensile test of a Ni-based single crystal superalloy

Yi-zhou Zhou, Yan-hong Yang, Bin Wang, 2021, Materials Characterization.

Fish oil enhanced the efficacy of low-dose cyclophosphamide regimen for proliferative lupus nephritis: a randomized controlled double-blind trial

Junsheng Wang, Chi Zhang, Chang Ge, 2021, Food & nutrition research.

Effects of fish oil during hemodialysis on nutritional status and quality of life: a randomized double-blinded trial

Dong Sun, Junsheng Wang, Chi Zhang, 2020, Food & nutrition research.

Predicting the Effects of Temperature on the Water Wettability of the Mg/MgO Surface through Atomistic Simulations

Junsheng Wang, Chi Zhang, Xin Li, 2019, The Journal of Physical Chemistry C.

Identifying the crystal structure of T1 precipitates in Al-Li-Cu alloys by ab initio calculations and HAADF-STEM imaging

Junsheng Wang, Xiang Yang, C. Xue, 2022, Journal of Materials Science & Technology.

Quantitative evaluation of the short-range order strengthening effect on solid solution and GB strength of Mg–Y alloys by ab initio calculations

S. Guan, Junsheng Wang, C. Xue, 2022, Journal of Materials Science.

First-principle investigation on the interfacial structure evolution of the δ'/θ'/δ' composite precipitates in Al-Cu-Li alloys

Houbing Huang, Junsheng Wang, Chi Zhang, 2020 .

Optimization of heat treatment process of Al–Mg–Si cast alloys with Zn additions by simulation and experimental investigations

Houbing Huang, Jiaqiang Han, Mingshan Zhang, 2019 .

Physical Metallurgy of Aluminum Alloys

Junsheng Wang, 2018, Aluminum Science and Technology.

Enhanced nucleation and precipitation hardening in Al–Mg–Si(–Cu) alloys with minor Cd additions

G. Sha, Yanjun Li, Shenbao Jin, 2020, Materials Science and Engineering: A.

Quantifying the effects of grain refiners (AlTiB and Y) on microstructure and properties in W319 alloys

Junsheng Wang, Xinxiu Liu, Bing Wang, 2022, Materials Today Communications.

Effects of cooling rates on microporosity in DC casting Al-Li alloy

Bin Wang, Junsheng Wang, Dong Chen, 2022, China Foundry.

Effects of cooling rates on microporosity in DC casting Al-Li alloy

Junsheng Wang, Bing Wang, Dong Chen, 2022, China Foundry.

Improving mechanical properties of wire arc additively manufactured AA2196 Al–Li alloy by controlling solidification defects

Yueling Guo, Shuiyuan Tang, Changmeng Liu, 2021, Additive Manufacturing.

Quantifying the influence of secondary phases on corrosion in multicomponent Mg alloys using X-ray computed microtomography

Junsheng Wang, Chi Zhang, Keli Liu, 2022, Corrosion Science.

Tailoring the strength and formability of Mg alloys through rare earth element additions (Gd and Dy) and dynamic recrystallizations

Junsheng Wang, Chi Zhang, Chen Liu, 2021 .

In Vitro Corrosion Performance of As-Extruded Mg–Gd–Dy–Zr Alloys for Potential Orthopedic Applications

Xiaohu Chen, Junsheng Wang, Yu Fu, 2022, Metals.

Local atomic ordering strategy for high strength Mg alloy design by first-principle calculations

Junsheng Wang, Chi Zhang, Shuo Wang, 2022, Journal of Alloys and Compounds.

Simultaneously improving strength and ductility of AZ91-type alloys with minor Gd addition

Junsheng Wang, Xiao-bo Li, 2019, Journal of Alloys and Compounds.

Research Progress on Multi-Component Alloying and Heat Treatment of High Strength and Toughness Al–Si–Cu–Mg Cast Aluminum Alloys

Yuan Zhang, Mingshan Zhang, Junsheng Wang, 2023, Materials.

Microstructural evolution of AA7050 alloy wires during tandem hot rolling (THR) and cold-drawing process

Wenzhe Li, Junsheng Wang, F. Qian, 2022, Materials Science and Engineering: A.

Accelerating pore nucleation and eutectic Si growth kinetics by increasing Cu and Sc for Al-Si-Mg alloys: In-situ observation

Jiaqiang Han, Bin Wang, Mingshan Zhang, 2021, Journal of Alloys and Compounds.

Microstructure diversity dominated by the interplay between primary intermetallics and eutectics for Al-Ce heat-resistant alloys

Yueling Guo, Changmeng Liu, Junsheng Wang, 2021, Journal of Alloys and Compounds.

Quantifying the effects of Sc and Ag on the microstructure and mechanical properties of Al–Cu alloys

Mingshan Zhang, Junsheng Wang, Bing Wang, 2021, Materials Science and Engineering: A.

Designing elastic modulus of Al3X precipitates in Al alloys by identifying effective atomic bonds and stabilizing coherent structures

Junsheng Wang, Yu Wang, Cheng Xue, 2021, Journal of Alloys and Compounds.

Quantifying the Effects of Grain Refiners Al-Ti-B and La on the Microstructure and Mechanical Properties of W319 Alloy

Junsheng Wang, Xinxi Liu, Bing Wang, 2022, Metals.

Design of high strength and electrically conductive aluminium alloys by machine learning

Mingshan Zhang, Junsheng Wang, C. Xue, 2022, Materials Science and Technology.

The kinetics of Fe-rich intermetallic formation in aluminium alloys : In situ observation

J. Allison, Junsheng Wang, Mei Li, 2009 .

Rationalizing Al-Mg, Al-Mg-Si, and multicomponent aluminum alloy design with segregation susceptibility predictions

Ruifeng Dou, Houbing Huang, Jiaqiang Han, 2020 .

Prediction of hot tearing susceptibility of direct chill casting of AA6111 alloys via finite element simulations

Ruifeng Dou, Jiaqiang Han, Junsheng Wang, 2020 .

Uncovering the effects of neutralizing elements (Co, Mn and Cr) on the Fe-rich intermetallic formation in Al–Si–Cu alloys

Junsheng Wang, Xinxiu Liu, Bing Wang, 2022, Materials Science and Engineering: A.

Quantifying the Effects of Carbides and Pores on Fatigue Damages of Ni-Based Single Crystal Superalloys at Elevated Temperature Using X-Ray CT Scans

Yi-zhou Zhou, Yan-hong Yang, Mingshan Zhang, 2022, Journal of Nondestructive Evaluation.

Effect of cooling rate on carbides in directionally solidified nickel-based single crystal superalloy: X-ray tomography and U-net CNN quantification

Yi-zhou Zhou, Yan-hong Yang, Junsheng Wang, 2021 .

Multiscale modeling of the influence of Fe content in a Al-Si-Cu alloy on the size distribution of intermetallic phases and micropores

J. Allison, Junsheng Wang, Mei Li, 2010 .

MicroRNA-143 inhibitor protective sepsis induced renal injury

Junsheng Wang, Xiaohong Xu, Chi Zhang, 2017 .

Heterogeneous nucleation of T1 precipitates in solid solution of Al-Cu-Li alloys from Ag-rich structures: An ab initio study

Junsheng Wang, C. Xue, Shuo Wang, 2023, Scripta Materialia.

Investigating the role of Cu, Zr and V on the evolution of microstructure and properties of Al-Si-Mg cast alloys

S. Guan, Jiaqiang Han, Mingshan Zhang, 2021 .

Ultra-strong Mg alloy with nano-grain structures produced by a high-throughput magnetron co-sputtering method for the full chemistry spectra

D. StJohn, Junsheng Wang, Bing Wang, 2022, Journal of Materials Science.

Achieving high strength and ductility of Al-Cu-Li alloy via creep aging treatment with different pre-strain levels

Yueling Guo, Mingshan Zhang, Junsheng Wang, 2021, Materials Today Communications.

Quantifying the effects of Sn on θ′-Al2Cu precipitation kinetics in Al–Cu alloys

S. Guan, Mingshan Zhang, Junsheng Wang, 2021, Materials Science and Technology.

Self-ion irradiation response of (CoCrFeNi)94Ti2Al4 alloy containing coherent nanoprecipitates

Yunfei Xue, W. Lu, Junsheng Wang, 2021 .

Continuous precipitate modes of the δʹ-Al3Li phase in Al-Li alloys

Junsheng Wang, Shuo Wang, Chi Zhang, 2022, Journal of Alloys and Compounds.

Comparative Study on Wire-Arc Additive Manufacturing and Conventional Casting of Al–Si Alloys: Porosity, Microstructure and Mechanical Property

Yueling Guo, Jiping Lu, Changmeng Liu, 2021, Acta Metallurgica Sinica (English Letters).

Uncovering the influence of Cu on the thickening and strength of the δ′/θ′/δ′ nano-composite precipitate in Al–Cu–Li alloys

Junsheng Wang, Chi Zhang, Shuo Wang, 2021, Journal of Materials Science.

Heterophase Interface Dominated Deformation and Mechanical Properties in Al‐Cu‐Li Alloys

Junsheng Wang, Chi Zhang, Shuo Wang, 2021, Advanced Theory and Simulations.

Mechanical properties of defective L12-Al3X (X = Sc, Lu) phase: A first-principles study

Houbing Huang, Junsheng Wang, Chi Zhang, 2020 .

Strain-induced broadening temperature range of electrocaloric effects in ferroelectric superlattices

Y. Wen, Z. Dang, Houbing Huang, 2019, Journal of Alloys and Compounds.

Numerical Simulation of Penetration Process of Depleted Uranium Alloy Based on an FEM-SPH Coupling Algorithm

Zhifei Yan, Junsheng Wang, Chi Zhang, 2022, Metals.

Heterogeneous nucleation of solid Al from the melt by Al 3 Ti : Molecular dynamics simulations

A. Horsfield, P. Brommer, Junsheng Wang, 2010 .

Coupling phase-field model and CFD for hot cracking predictions of Al-Li alloys

Junsheng Wang, Chi Zhang, Dong Chen, 2021 .

Susceptibility of lithium containing aluminum alloys to cracking during solidification

Jiaqiang Han, K. Niu, Mingshan Zhang, 2019, Materialia.

Relationship between amounts of low-melting-point eutectics and hot tearing susceptibility of ternary Al−Cu−Mg alloys during solidification

Jiaqiang Han, K. Niu, Mingshan Zhang, 2020 .

Atomic-level insights into nano-salt droplets wetting on the MgO surface using molecular dynamics simulations

Houbing Huang, Junsheng Wang, Chi Zhang, 2020 .

Theoretical and experimental studies of Ba2SmTaO6 on crystal structure, electronic structure and optical properties

Fu-chi Wang, Junsheng Wang, Lihong Gao, 2017 .

Does Expanding or Contracting MgO Lattice Really Help with Corrosion Resistance of Mg Surface: Insights from Molecular Dynamics Simulations

Shijie Zhu, S. Guan, Junsheng Wang, 2021, ACS omega.

A New Strategy on Designing Fluxes for Aluminum Alloy Melt Refinement

Junsheng Wang, J. Zeng, Zhengbing Xu, 2023, Materials.

Effect of Direct Rolling Process on Microstructure and Mechanical Properties of the Electron Beam Cold Hearth Melting Ti-6Al-4V Alloy

Wei Wang, J. Yi, Junsheng Wang, 2022, Metals.

Uncovering the effects of Ce and superheat temperature on Fe-rich intermetallic and microporosity formation in aluminum alloy

Junsheng Wang, Xinxiu Liu, Keli Liu, 2022, Materials Characterization.

An integrated microporosity model of 3D X-ray micro-tomography and directional solidification simulations for Ni-based single crystal superalloys

Yuansheng Yang, Yi-zhou Zhou, Yan-hong Yang, 2021 .

Optimizing process windows for minimizing the pore size of Ni-based single crystal superalloys

Yuansheng Yang, Houbing Huang, Yi-zhou Zhou, 2019 .

In-situ Observation and Mathematical Modelling of the Nucleation and Growth of Intermetallics and Micropores During the Solidification of Aluminium Alloys

Junsheng Wang, 2009 .

Heterogeneous nucleation of solid Al from the melt by TiB 2 and Al 3 Ti : An ab initio molecular dynamics study

A. Horsfield, Junsheng Wang, P. Lee, 2010 .

Influence of Annealing Treatment on α Phase Globularization, Mechanical Properties, and Corrosion Performance of Hot-Rolled Ti–0.3Mo–0.8Ni Alloy Melted by Electron Beam Cold Hearth Technology

Han Xiao, Junsheng Wang, Zhirong Huang, 2023, Metallurgical and Materials Transactions A.