J. Nampoothiri

发表

Porosity alleviation and mechanical property improvement of strontium modified A356 alloy by ultrasonic treatment

B. S. Murty, K. R. Ravi, B. Raj, 2018 .

Post in-situ reaction ultrasonic treatment for generation of Al–4.4Cu/TiB2 nanocomposite: A route to enhance the strength of metal matrix nanocomposites

Baldev Raj, K. R. Ravi, B. Raj, 2016 .

Microstructure and mechanical properties of ultrasonically processed Al-7Si alloy / Y2O3 nanocomposite.

S. Shalini, T. Kumar, J. Nampoothiri, 2022, Silicon.

Effect of post-reaction ultrasonic treatment on synthesis, microstructural evolution and mechanical behaviour of Al 4043/TiB2 in situ nanocomposites

K. R. Ravi, K. Wins, J. Nampoothiri, 2021, Arabian Journal for Science and Engineering.

Ultrasonic assisted synthesis of Al–Cu/2 vol%Grp composite and its characterization

K. R. Ravi, D. Peshwe, S. Dhamodharan, 2020 .

Synthesis, Characterization and Mechanical Properties of AA7075 Based MMCs Reinforced with TiB2 Particles Processed Through Ultrasound Assisted In-Situ Casting Technique

I. G. Siddhalingeshwar, K. R. Ravi, J. Nampoothiri, 2018, Transactions of the Indian Institute of Metals.

Effect of Ultrasonic Treatment on Microstructure and Mechanical Property of In Situ Al/2TiB Particulate Composites

K. R. Ravi, B. Raj, J. Nampoothiri, 2015 .

Role of Ultrasonic Treatment on Microstructural Evolution in A356/TiB2 In-Situ Composite

K. R. Ravi, B. Raj, J. Nampoothiri, 2015, Transactions of the Indian Institute of Metals.

Mitigation of hot cracking in Inconel 718 superalloy by ultrasonic vibration during gas tungsten arc welding

K. R. Ravi, V. Balusamy, R. Subramanian, 2018 .

Elucidating the role of microstructural modification on stress corrosion cracking of biodegradable Mg4Zn alloy in simulated body fluid.

K. R. Ravi, R. Sivasubramanian, J. Nampoothiri, 2020, Materials science & engineering. C, Materials for biological applications.

Influence of ultrasonic treatment on the structure and properties of MgAl2O4 particle-stabilized aluminum foams

K. R. Ravi, J. Nampoothiri, M. Mukherjee, 2022, Materials Science and Engineering: A.

Ultrasonic assisted grain refinement of Al–Mg alloy using in-situ MgAl2O4 particles

K. R. Ravi, B. Raj, J. Nampoothiri, 2015 .

Wearable, Flexible Ethanol Gas Sensor Based on TiO2 Nanoparticles-Grafted 2D-Titanium Carbide Nanosheets

J. Nampoothiri, B. Pullithadathil, Karthikeyan K. Karuppanan, 2019, ACS Applied Nano Materials.

Microstructure and mechanical properties of ultrasonically processed Al-7Si alloy / Y2O3 nanocomposite.

S. Shalini, T. Kumar, J. Nampoothiri, 2021, Silicon.

Microstructure and Wear Characteristics of Nano Y2O3 Particles Reinforced A356 Alloy Composites Synthesized Through Novel Ultrasonic Assisted Stir Casting Technique

T. Thankachan, S. Shalini, J. Nampoothiri, 2021, Transactions of the Indian Institute of Metals.

Solidification Analysis of Mg–4Zn–xSr System to Study Phase Transformations in Mg-Rich Corner

K. R. Ravi, J. Nampoothiri, Deepa B. Prabhu, 2018, Transactions of the Indian Institute of Metals.

Nanocomposites: A Gaze through Their Applications in Transport Industry

K. R. Ravi, B. Raj, J. Nampoothiri, 2017 .

Structural and Mechanical Behavior of Al-4.4Cu/2TiB2In-Situ Nanocomposites Fabricated by Post-In-Situ Reaction Ultrasonic Processing

K. R. Ravi, I. Balasundar, T. Raghu, 2020, Metallurgical and Materials Transactions B.

In-situ generation of MgAl2O4 particles in Al-Mg alloy using H3BO3 addition for grain refinement under ultrasonic treatment

T. Kumar, J. Nampoothiri, R. Raghu, 2018, Measurement.

The Effect of Melt Ultrasound Treatment on the Microstructure and Age Hardenability of Al-4 Wt Pct Cu/TiC Composite

K. R. Ravi, J. Nampoothiri, T. Rajasekaran, 2019, Metallurgical and Materials Transactions B.

Experimental investigation and thermodynamic calculation of the phase equilibria in the Mg-rich region of Mg-Sn-Y alloys

K. R. Ravi, I. Balasundar, J. Nampoothiri, 2017 .

Development of Wear Mechanism Map for Al–4Mg Alloy/MgAl2O4 In Situ Composites

S. Shalini, T. Kumar, R. Subramanian, 2019, Transactions of the Indian Institute of Metals.

Fabrication of Co-Continuous ceramic composite (C4) through gas pressure infiltration technique

A. Prasanth, K. Shankar, J. Nampoothiri, 2021 .

Microstructure Evolution during Semi-solid Isothermal Holding of Liquidus Cast Strontium-Modified A356 Alloy

K. R. Ravi, I. Balasundar, J. Nampoothiri, 2018, Transactions of the Indian Institute of Metals.

Microstructure and Mechanical Properties of Al/MgAl2O4 In Situ Composites Synthesized by Ultrasonic Cavitation

R. Subramanian, J. Nampoothiri, R. Raghu, 2019, Transactions of the Indian Institute of Metals.

Machine learning predictive approaches for hot crack mitigation in modified TIG welded AA7075 joints

J. Nampoothiri, S. M., Dhilip A, 2022, Materials and Manufacturing Processes.

High- and Medium-Velocity Impact Behavior of Al5083/SiC Interpenetrating Lightweight Composites for Monocoque Armor Panels

V. Krishnaraj, J. Nampoothiri, A. Prasanth, 2023, Journal of Materials Engineering and Performance.

Optimization of Ultrasonic-Assisted TIG (UA-TIG) Welding Process Parameters for AA7075 Alloy Joints Using RSM-GA Approach

J. Nampoothiri, D. Annamalai, Pratheesh Kumar Manikandan Rajam, 2023, Journal of Testing and Evaluation.

Influence of nano and micro particles on the expansion and mechanical properties of aluminum foams

K. R. Ravi, J. Nampoothiri, M. Mukherjee, 2017 .

Uniaxial Compressive Behavior of AA5083/SiC Co-Continuous Ceramic Composite Fabricated by Gas Pressure Infiltration for Armour Applications

K. Shankar, J. Escobedo, V. Krishnaraj, 2022, Journal of Composites Science.

Effect of impactor velocity on low velocity impact behavior of Al/SiC monocoque interpenetrating composites

J. Escobedo, V. Krishnaraj, J. Nampoothiri, 2023, Materials Today Communications.