Hongge Yan

发表

Effects of Solution Heat Treatment on Microstructure and Mechanical Properties of the Mg-4.5Zn-4.5Sn-2Al-0.6Sr Alloy

Jihua Chen, Guanghao Zhang, Hongge Yan, 2014, Journal of Materials Engineering and Performance.

High plasticity mechanism of high strain rate rolled Mg-Ga alloy sheets

Jihua Chen, Hongge Yan, B. Su, 2021, Journal of Materials Science & Technology.

Effects of artificial aging on microstructure and mechanical properties of the Mg-4.5Zn-4.5Sn-2Al alloy

Jihua Chen, Guanghao Zhang, Hongge Yan, 2014 .

Microstructure evolution and mechanical properties of the ZM61 alloy sheets under different pre-rolling and high strain rate rolling temperatures

Min Song, Jihua Chen, Hongge Yan, 2020 .

Effect of Strain Rate on the Microstructure and Texture Evolution of the ZK60 Alloy Sheets

Min Song, Jihua Chen, Hongge Yan, 2020, Metals and Materials International.

Effect of twinning and dynamic recrystallization on the high strain rate rolling process

Hongge Yan, S. Zhu, Jizi Liu, 2010 .

Dynamic precipitation, microstructure and mechanical properties of Mg-5Zn-1Mn alloy sheets prepared by high strain-rate rolling

Min Song, Jihua Chen, Hongge Yan, 2016 .

Enhancing the mechanical properties of high strain rate rolled Mg–6Zn–1Mn alloy by pre-rolling

Min Song, Jihua Chen, Hongge Yan, 2017, Journal of Materials Science.

Improving the mechanical properties of a ZM61 magnesium alloy by pre-rolling and high strain rate rolling

S. Ni, Min Song, Hongge Yan, 2018 .

Tribological behavior and wear mechanism of resin-matrix contact strip against copper with electrical current

Zhen-hua Chen, Ding Chen, Hongge Yan, 2008 .

Microstructure characterisation and mechanical properties of rapidly solidified Mg–Zn–Ca alloys with Ce addition

Jihua Chen, Hongge Yan, Z. Chen, 2008 .

Bimodal-Structured Al–Mg Alloy with High Strength and Ductility Processed by High Strain Rate Rolling at Medium Temperature

Min Song, Jihua Chen, Hongge Yan, 2021, Metals and Materials International.

Ultrafine LiNi1/3Co1/3Mn1/3O2 powders via an enhanced thermal decomposition solid state reaction

Jihua Chen, Chang‐ling Fan, Zhengfu Zhang, 2019, Journal of Applied Electrochemistry.

Improving electrochemical properties of LiNi 1/3 Co 1/3 Mn 1/3 O 2 by enhancing thermal decomposition of carbonates to synthesize ultrafine powders

Jihua Chen, Chang‐ling Fan, Zhengfu Zhang, 2018, Journal of Electroanalytical Chemistry.

Improvement of electrochemical properties of LiNi1/3Mn1/3Co1/3O2 by coating with La0.4Ca0.6CoO3

Jinhui Peng, Shenghui Guo, Lei Xu, 2014, Journal of Solid State Electrochemistry.

Effects of ZrO2 Coating on LiNi1/3Mn1/3Co1/3O2 Particle with Microwave Pyrolysis

Jinhui Peng, Shenghui Guo, Lei Xu, 2014, Journal of Materials Engineering and Performance.

Effects of Rolling Deformation on Microstructure, Tensile Properties and Corrosion Behaviors of High Mg Alloyed of Al-Mg Alloy

Jihua Chen, Hongge Yan, B. Su, 2021, Journal of Materials Engineering and Performance.

Effect of Zn/Ga Ratio on Damping and Thermal Behaviors of Fine-Grained Mg-Zn-Ga Sheets

Jihua Chen, Hongge Yan, B. Su, 2022, Journal of Materials Engineering and Performance.

Effects of Ga addition on the corrosion behaviours of high strain rate rolled Mg–Ga alloy sheets

Jihua Chen, Hongge Yan, B. Su, 2021, Corrosion Engineering, Science and Technology.

Degradation, stress corrosion cracking behavior and cytocompatibility of high strain rate rolled Mg-Zn-Sr alloys

Jihua Chen, Hongge Yan, B. Su, 2020 .

Correlation Between Microstructure and Corrosion Resistance of Magnesium Alloys Prepared by High Strain Rate Rolling

Jihua Chen, Hongge Yan, B. Su, 2017, Journal of Materials Engineering and Performance.

Microstructure, Bio-corrosion Behavior, and Corrosion Residual Strength of High Strain Rate Rolled Mg-4Zn Alloy Sheet

Jihua Chen, Hongge Yan, B. Su, 2016, Journal of Materials Engineering and Performance.

Effects of Minor Sr Addition on Biocorrosion and Stress Corrosion Cracking of As-Cast Mg-4Zn Alloys

Jihua Chen, Hongge Yan, B. Su, 2020 .

Sintering and electrical properties of Ce0.8Y0.2O1.9 powders prepared by citric acid-nitrate low-temperature combustion process

Zhen-hua Chen, Hongge Yan, Hongmei Xu, 2006 .

Effect of Zn/Ga Ratio on Damping and Thermal Behaviors of Fine-Grained Mg-Zn-Ga Sheets

Jihua Chen, Hongge Yan, B. Su, 2022, Journal of Materials Engineering and Performance.

Achieving high damping and excellent ductility of Al Mg alloy sheet by the coupling effect of Mg content and fine grain structure

Min Song, Jihua Chen, Hongge Yan, 2021 .

Enhanced photocatalytic activity of hybrid reduced graphene oxide–CeO2 hierarchical flower-like nanostructures

Hongge Yan, Fangshuai Chen, Heao Wang, 2018, Research on Chemical Intermediates.

Study on phase structures and compositions, microstructures, and dielectric characteristics of (1-x)NdGaO3-xBi0.5Na0.5TiO3 microwave ceramic systems

Fei Liu, Guohua Chen, C. Yuan, 2020 .

Phase structures, microstructures, and dielectric characteristics of high εr (1-x-y)Bi0.5Na0.5TiO3-xLi0.5Sm0.5TiO3-yNa0.5La0.5TiO3 microwave ceramic systems

Fei Liu, Guohua Chen, Changrong Zhou, 2019, Ceramics International.

Effects of Al on crack propagation in titanium alloys and the governing toughening mechanism

X. Ou, K. Zhou, Xiaoyong Zhang, 2021, Mechanics of Materials.

Effects of Ga on microstructure and mechanical properties of HSRRed Mg–Zn–Zr alloys

Jihua Chen, Hongge Yan, B. Su, 2022, Materials Science and Technology.

The interactions between dynamic precipitates and dynamic recrystallization in Mg-5Zn-1Mn alloys during hot compression

Min Song, Jihua Chen, Hongge Yan, 2020 .

Effects of Ga Content on Dynamic Recrystallization and Mechanical Properties of High Strain Rate Rolled Mg–Ga Alloys

Jihua Chen, Hongge Yan, B. Su, 2019, Metals and Materials International.

Effects of Sn addition on dynamic recrystallization of Mg-5Zn-1Mn alloy during high strain rate deformation

Jihua Chen, Hongge Yan, B. Su, 2018, Materials Science and Engineering: A.

Effect of sample orientation and initial microstructures on the dynamic recrystallization of a Magnesium alloy

S. Ringer, D. Ruan, X. An, 2017 .

Mechanisms for enhanced plasticity in magnesium alloys

S. Ringer, G. Sha, Xiaozhou Liao, 2015 .

Microstructure and mechanical properties of ZK21 magnesium alloy fabricated by multiple forging at different strain rates

Jihua Chen, Hongge Yan, B. Su, 2012 .

Nanoscale Co3O4 powders prepared by an enhanced solid-state reaction method

Jihua Chen, Chang‐ling Fan, Zhengfu Zhang, 2020 .

Preparation and properties of Y3+ and Ca2+ co-doped ceria electrolyte materials for ITSOFC

Zhen-hua Chen, Hongge Yan, Hongmei Xu, 2008 .

Mechanical and electrical properties of Al 2O 3/Ce 0.8Y 0.2O 1.9 composite electrolytes

Zhen-hua Chen, Hongge Yan, Hongmei Xu, 2007 .

The flexural strength and densification behavior of Al2O3-doped Ce0.8Y0.2O1.9 electrolyte composites

Zhen-hua Chen, Hongge Yan, Hongmei Xu, 2007 .

Dynamic precipitation behavior before dynamic recrystallization in a Mg-Zn-Mn alloy during hot compression

Min Song, Jihua Chen, Hongge Yan, 2019, Materials Characterization.

Effect of Mg Content on the Damping Behavior of Al–Mg Alloys

Min Song, Jihua Chen, Hongge Yan, 2020, Metals and Materials International.

High-Temperature Electrochemical Performance of FeF3/C Nanocomposite as a Cathode Material for Lithium-Ion Batteries

Jinhui Peng, Zhengfu Zhang, Hongge Yan, 2018, Journal of Materials Engineering and Performance.

Dynamic Precipitation, Dynamic Recrystallization, and Texture Evolution of Mg–5Zn Alloy Sheets with Trace Ca and Sr Additions

Min Song, Jihua Chen, Hongge Yan, 2020, Microscopy and Microanalysis.

Effects of Sn addition on microstructure and mechanical properties of Mg–Zn–Al alloys

Zhen-hua Chen, Jihua Chen, Fuquan Zhang, 2008 .

Effects of the rolling strain rate-induced microstructure on bio-corrosion behavior of the Mg–5Zn–1Mn alloy sheet

Jihua Chen, Hongge Yan, W. Xia, 2019, Materials Research Express.

Hot deformation behavior of Al–9.0Mg–0.5Mn–0.1Ti alloy based on processing maps

Wei Zhou, Hongge Yan, Cai-he Fan, 2017 .

Flow behavior and dynamic transformation of bimodal TC17 titanium alloy during high strain rate hot compression

Jihua Chen, Hongge Yan, B. Su, 2022, Journal of Alloys and Compounds.

Microstructure, texture modification and mechanical anisotropy of high strain rate rolled Mg–Ga alloy sheets

Jihua Chen, Hongge Yan, B. Su, 2020, Journal of Materials Science.

Flow behavior and microstructure of ZK60 magnesium alloy compressed at high strain rate

Xianlong Liu, Jihua Chen, Hongge Yan, 2014 .

Hot deformation behavior and microstructure evolution of ZK21 magnesium alloy

Jihua Chen, Hongge Yan, B. Su, 2010 .

Improving strength and corrosion resistance of high Mg alloyed Al–Mg–Mn alloys through Ce addition

Jihua Chen, Hongge Yan, W. Xia, 2020, Corrosion Engineering, Science and Technology.

Effect of Heat Treatment on the Microstructure and Properties of High Strain Rate Rolled 7050 Aluminum Alloy

Jihua Chen, Hongge Yan, B. Su, 2021, Metals and Materials International.

Effects of Zn Addition on Dynamic Recrystallization of High Strain Rate Rolled Al–Mg Sheets

Jihua Chen, Hongge Yan, B. Su, 2021, Metals and Materials International.

High ductility and strong work-hardening behavior of Zn modified as-hot-rolled Al–Mg sheets

Min Song, Jihua Chen, Hongge Yan, 2021 .

Enhancing the intergranular corrosion resistance of high Mg‐alloyed Al–Mg alloy by Y addition

Jihua Chen, Hongge Yan, B. Su, 2020, Materials and Corrosion.

Mechanical properties, corrosion behavior, and microstructure of Sr modified Al–9.2Mg–0.7Mn alloys

Jihua Chen, Hongge Yan, B. Su, 2019, Materials and Corrosion.

Enhancing damping capacity and mechanical properties of Al-Mg alloy by high strain rate hot rolling and subsequent cold rolling

Jihua Chen, Hongge Yan, B. Su, 2022, Journal of Alloys and Compounds.

Effects of Sn on microstructure and mechanical properties of as-rolled Mg–5Zn–1Mn alloy

Jihua Chen, Hongge Yan, B. Su, 2018 .

Microstructure and mechanical properties of friction-stir-welded high-Mg-alloyed Al–Mg alloy plates at different rotating rates

Jihua Chen, Hongge Yan, Xinyu Li, 2020, Rare Metals.

Effects of Zn Addition on Microstructure, Mechanical, and Corrosion Properties of the As-Solutionized Mg-5Ga Alloy

Jihua Chen, Hongge Yan, B. Su, 2021, Journal of Materials Engineering and Performance.

Effects of minor Sr addition on microstructure, mechanical and bio-corrosion properties of the Mg-5Zn based alloy system

Jihua Chen, Hongge Yan, B. Su, 2017 .

Dynamic recrystallization and mechanical properties of high-strain-rate hot rolled Mg–5Zn alloys with addition of Ca and Sr

Jihua Chen, Hongge Yan, B. Su, 2019, Transactions of Nonferrous Metals Society of China.

Deformation behaviors of porous 4032 Al alloy preform prepared by spray deposition during hot rolling

Zhen-hua Chen, Hongge Yan, W. Xia, 2007 .

Dynamic recrystallization behaviors of high Mg alloyed Al-Mg alloy during high strain rate rolling deformation

Min Song, Jihua Chen, Hongge Yan, 2019, Materials Science and Engineering: A.

Influence of different deformation processing on the AZ31 magnesium alloy sheets

Jun Jiang, Hongge Yan, W. Xia, 2009 .

Grain refinement in as-cast AZ80 Mg alloy under large strain deformation

Hui Zhang, Hongge Yan, Q. Guo, 2007 .

Effect of Ca Addition on the Mechanical Properties and Thermal Conductivity of Mg-2ga Alloy

Jihua Chen, Hongge Yan, B. Su, 2022, SSRN Electronic Journal.

Liquation cracking in laser beam welded joint of ZK60 magnesium alloy

Hongge Yan, Zhao-hui Yu, Ying Li, 2012 .

Effects of cooling rate and pressure on microstructure and mechanical properties of sub-rapidly solidified Mg–Zn–Sn–Al–Ca alloy

Jihua Chen, Hongge Yan, B. Su, 2013 .

Effects of aging treatment and pre-deformation on stress corrosion cracking of magnesium alloy

Jihua Chen, Hongge Yan, B. Su, 2022, Journal of Materials Research and Technology.

Microstructure, Texture Characteristics, Mechanical and Bio-Corrosion Properties of High Strain Rate Rolled Mg–Zn–Sr Alloys

Jihua Chen, Hongge Yan, X. Gong, 2020, Metals and Materials International.

To improve strength and bio-corrosion resistance of Mg-4Zn alloy via high strain rate rolling combined with double aging

Jihua Chen, Hongge Yan, B. Su, 2018, Materials Letters.

New orientations between β′2 phase and α matrix in a Mg-Zn-Mn alloy processed by high strain rate rolling

S. Ni, Min Song, Hongge Yan, 2018, Journal of Alloys and Compounds.

Deformation microstructures and texture evolution of the Mg–Zn–Mn alloy with high strain rate rolling

Hongge Yan, Qin Wu, L. Ou, 2022, Journal of Materials Research.

Effects of solid solution elements on damping capacities of binary magnesium alloys

Min Song, Jihua Chen, Hongge Yan, 2020 .

Deformation induced dynamic recrystallization and precipitation strengthening in an MgZnMn alloy processed by high strain rate rolling

Chao Yang, S. Ni, Min Song, 2016 .

Deformation Behavior of AZ31 Magnesium Alloy During Tension at Moderate Temperatures

Zhen-hua Chen, Ding Chen, Hongge Yan, 2009, Journal of Materials Engineering and Performance.

Elevated temperature compression behaviour of Mg–Al–Zn alloys

Hongge Yan, Z. Chen, Q. Guo, 2006 .

Enhancing Mechanical Properties of Mg-6.0Gd-1.0Y-0.5Zr Alloy by Thermomechanical Treatment

Jihua Chen, Qiang Li, Hongge Yan, 2022, Journal of Materials Engineering and Performance.

Effects of Zn addition on precipitation behavior and mechanical properties of Mg-5Ga alloy

Jihua Chen, Hongge Yan, B. Su, 2021 .

⟨c + a⟩ dislocations shearing (0001)α plate precipitates in an Mg-Zn-Mn alloy

S. Ni, Min Song, Hongge Yan, 2019, Scripta Materialia.

Solid solution strengthening and damping capacity of Mg−Ga binary alloys

Qiang Li, Jihua Chen, Hongge Yan, 2022, Transactions of Nonferrous Metals Society of China.

Ga alloying for fabricating magnesium alloy sheet with uniform microstructure and excellent performance

Jihua Chen, Hongge Yan, Wensen Huang, 2021 .

Development of the fine-grained Mg-0.6Zr sheets with enhanced damping capacity by high strain rate rolling

Min Song, Jihua Chen, Hongge Yan, 2020 .

Microstructures and mechanical properties of 2024Al/Gr/SiC hybrid composites fabricated by vacuum hot pressing

Jihua Chen, Hongge Yan, B. Su, 2016 .

Continuous compaction of spray deposited Al–20 wt-%Si/SiCP composites via wedge pressing technique

Hongge Yan, J. Teng, Z. Chen, 2007 .

Effect of the silicon content and thermomechanical treatment on the dry sliding wear behavior of spray-deposited Al–Si/SiCp composites

D. Fu, Hongge Yan, Gang Chen, 2007 .

High strength and large ductility of a fine-grained Al–Mg alloy processed by high strain rate hot rolling and cold rolling

Min Song, Jihua Chen, Hongge Yan, 2020 .

Fracture behaviors of AZ80 magnesium alloy during multiple forging processes

Zhen-hua Chen, Hui Zhang, Hongge Yan, 2006 .

Microstructural characterisation and liquation behaviour of laser welded joint of fine grained AZ91 magnesium alloy thin sheets

Z. M. Yang, G. Zhang, Hongge Yan, 2015 .

Effects of the β1′ precipitates on mechanical and damping properties of ZK60 magnesium alloy

Min Song, Jihua Chen, Hongge Yan, 2021 .

Effects of Zn/Ga ratio on microstructure, mechanical, damping and thermal properties of Mg–Zn–Ga alloy solid solutions

Jihua Chen, Hongge Yan, B. Su, 2022, Journal of Materials Research.

Effects of Zn content on damping behaviours of Al–Mg alloys

Jihua Chen, Hongge Yan, B. Su, 2021 .

Study on the preparation of the SiCp/Al–20Si–3Cu functionally graded material using spray deposition

Hongge Yan, B. Su, J. H. Chen, 2010 .

Behaviour of AZ31 magnesium alloy during compression at elevated temperatures

Hui Zhang, Hongge Yan, Z. Wang, 2005 .

Microstructual evolution of AZ80 magnesium alloy during multi-directional compression deformation at elevated temperature

Jihua Chen, Hongge Yan, B. Su, 2011 .

Microstructure Evolution and Recrystallization Mechanisms of High Mg Alloyed Al-Mg Alloy during Friction Stir Welding with Different Cooling Media

Jihua Chen, Hongge Yan, B. Su, 2022, Journal of Materials Engineering and Performance.

Effects of low temperature aging precipitates on damping and mechanical properties of ZK60 magnesium alloy

Jihua Chen, Hongge Yan, B. Su, 2020 .

Dynamic recrystallization, texture and mechanical properties of high Mg content Al–Mg alloy deformed by high strain rate rolling

Jihua Chen, Hongge Yan, B. Su, 2021, Transactions of Nonferrous Metals Society of China.

Influences of welding speed on microstructure and mechanical properties of friction stir welded Al–Mg alloy with high Mg content

Jihua Chen, Hongge Yan, B. Su, 2020, Materials Research Express.

Microstructures and mechanical properties of laser welded wrought fine-grained ZK60 magnesium alloy

Jihua Chen, Hongge Yan, B. Su, 2015 .

Laser Beam Welding of AZ31 Magnesium Alloy with Filler Strip

Jihua Chen, Hongge Yan, B. Su, 2010 .

Synthesis of binary and ternary intermetallic powders via a novel reaction ball milling technique

Zhenhua Chen, Ding Chen, Ding Chen, 2007 .

Preparation and tribological investigation of resin–matrix contact strip with variable current

Z. H. Chen, Hongge Yan, Chuanjun Tu, 2009 .

Microstructure and mechanical properties of laser welded wrought ZK21 magnesium alloy

Jihua Chen, Hongge Yan, Z. H. Yu, 2009 .

Synthesis of FeF2/carbon composite nanoparticle by one-pot solid state reaction as cathode material for lithium-ion battery

Jinhui Peng, Guo Chen, Zhengfu Zhang, 2017 .

High Strength-Thermal Conductivity Mg-Ga-Ca-Ce Sheet by Hot-Extrusion and Rolling

Jihua Chen, Hongge Yan, B. Su, 2023, SSRN Electronic Journal.

Microstructures and mechanical properties of BP/7A04 Al matrix composites

Hongge Yan, Gang Chen, L. Ou, 2019, Transactions of Nonferrous Metals Society of China.

Ambient temperature mechanical properties of Al–8.5Fe–1.3V–1.7Si/SiCP composite

X. Yin, Hongge Yan, Gang Chen, 2007 .

Enhanced Formability of AZ31 Magnesium Alloy Sheet Processed by Equal Channel Angular Rolling and Annealing Treatment

Ding Chen, Hongge Yan, W. Xia, 2007 .

Effect of welding speed on microstructure and mechanical properties of Al−Mg−Mn−Zr−Tialloy sheet during friction stir welding

Jihua Chen, Hongge Yan, B. Su, 2021, Transactions of Nonferrous Metals Society of China.

Low-temperature combustion synthesis and sintering of nanosized Ce0.8Y0.2O1.9 powders

Hongge Yan, Hongmei Xu, Z. Chen, 2008 .

Preparation, Process Optimization and Performance of LiNi1/3Mn1/3Co1/3O2 Coin‐Type Lithium Ion Battery

Jinhui Peng, Jiang Du, Zhengfu Zhang, 2015 .

Preparation, Process Optimization and Performance of LiNi1/3Mn1/3Co1/3O2 Coin‐Type Lithium Ion Battery

Jinhui Peng, Jiang Du, Zhengfu Zhang, 2015 .

Improving electrochemical properties of LiCoO2 by enhancing thermal decomposition of Cobalt and Lithium carbonates to synthesize ultrafine powders

Jihua Chen, Chang‐ling Fan, Zhengfu Zhang, 2017 .

Effects of Ca addition on microstructure, mechanical properties and corrosion behaviors of solution treated Mg-5Ga-xCa alloys

Jihua Chen, Hongge Yan, B. Su, 2024, Materials Today Communications.

Improving Aging Behavior and Corrosion Resistance of Mg-5Ga Alloy by Ca Alloying

Jihua Chen, Hongge Yan, B. Su, 2024, Journal of Materials Engineering and Performance.