I. L. Muller

发表

Characterization of Siloxane-poly(methyl methacrylate) Hybrid Films Obtained on a Tinplate Substrate Modified by the Addition of Organic and Inorganic Acids

V. H. Sarmento, S. R. Kunst, L. V. Beltrami, 2015 .

Performance of a PEMFC system integrated with a biogas chemical looping reforming processor: A theoretical analysis and comparison with other fuel processors (steam reforming, partial oxidation and auto-thermal reforming)

Iduvirges Lourdes Muller, I. L. Muller, Luis Frederico Pinheiro Dick, 2012 .

Corrosion resistance of siloxane–poly(methyl methacrylate) hybrid films modified with acetic acid on tin plate substrates: Influence of tetraethoxysilane addition

V. H. Sarmento, S. R. Kunst, H. P. Cardoso, 2014 .

Electrodeposition of diamond-like carbon (DLC) films on Ti

I. L. Muller, T. M. Manhabosco, 2009 .

Influence of aqueous phase on electrochemical biocorrosion tests in diesel/water systems

C. Gaylarde, F. Bento, I. L. Muller, 2004 .

Degradation and corrosive activities of fungi in a diesel–mild steel–aqueous system

I. Beech, C. Gaylarde, Fátima Menezes Bento, 2005 .

WC10Co4Cr coatings deposited by HVOF on martensitic stainless steel for use in hydraulic turbines: Resistance to corrosion and slurry erosion

I. L. Muller, C. Malfatti, R. Schroeder, 2019, Surface and Coatings Technology.

Corrosion and cell viability studies of graphite-like hydrogenated amorphous carbon films deposited on bare and nitrided titanium alloy.

I. L. Muller, T. M. Manhabosco, R. J. Batista, 2014 .

N‐methyl‐2‐hydroxyethylammonium oleate ionic liquid performance as corrosion inhibitor for mild steel in hydrochloric acid medium

S. Mattedi, I. L. Muller, C. Malfatti, 2020, Materials and Corrosion.

Additive-free electrodeposition of cobalt on silicon from 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid

Fabiano Perin Gasparin, I. L. Muller, Henriques Brito, 2021 .

An attempt of experimental separation of the potentiodynamic anodic peaks of iron in alkaline solutions and application of the ohmic model for passive film growth

E. M. Martini, I. L. Muller, S. Amaral, 2001 .

Operation of solid oxide fuel cells on glycerol fuel: A thermodynamic analysis using the Gibbs free energy minimization approach

I. L. Muller, A. Silva, 2010 .

Inhibitor-doped sol–gel coatings for corrosion protection of magnesium alloy AZ31

S. Lamaka, M. Zheludkevich, I. L. Muller, 2010 .

The characterization of the sulphide stress-corrosion susceptibility of high-strength low-alloy steels in standardized solutions

W. Kindlein, I. L. Muller, R. Schroeder, 1993 .

An amino‐based protic ionic liquid as a corrosion inhibitor of mild steel in aqueous chloride solutions

S. Mattedi, I. L. Muller, C. Malfatti, 2020, Materials and Corrosion.

Influence of saccharin on morphology and properties of cobalt thin films electrodeposited over n-Si(100)

I. L. Muller, T. M. Manhabosco, 2008 .

Electrodeposition of diamond-like carbon films on titanium alloy using organic liquids: Corrosion and wear resistance

I. L. Muller, C. Malfatti, R. Hübler, 2012 .

Stress corrosion cracking and hydrogen embrittlement susceptibility of an eutectoid steel employed in prestressed concrete

I. L. Muller, R. Schroeder, 2003 .

Pitting potential of high purity binary aluminium alloys—I. AlCu alloys. Pitting and intergranular corrosion

J. Galvele, I. L. Muller, 1977 .

Chemical composition and electronic structure of passive films formed on Alloy 600 in acidic solution

I. L. Muller, M. Belo, L.A.S. Ries, 2008 .

The electrochemical behaviour of Fe in acetate solution containing chloride

L. A. Féris, I. L. Muller, D. Azambuja, 1996 .

Pitting potential of high purity binary aluminium alloys—II. AlMg and AlZn alloys

J. Galvele, I. L. Muller, 1977 .

Mössbauer effect study of corrosion products from a Brazilian oil refinery

I. L. Muller, G. Englert, J. Cunha, 1993 .

Characterization of the film formed on iron in borate solution by electrochemical impedance spectroscopy

I. L. Muller, E. Martini, 2000 .

The influence of acetate concentration on the dissolution of iron in aqueous solutions

I. L. Muller, D. Azambuja, 1994 .

A RRDE study of the electrochemical behavior of iron in solutions containing silicate and sulphate at pH 10–13

I. L. Muller, S. Amaral, 1999 .

Effect of Silicate on Passive Films Anodically Formed on Iron in Alkaline Solution as Studied by Electrochemical Impedance Spectroscopy

I. L. Muller, S. Amaral, 1999 .

Localized corrosion behavior studies by SVET of 1010 steel in different concentrations of sodium chloride containing [m-2HEA][Ol] ionic liquid as corrosion inhibitor

S. Mattedi, I. L. Muller, C. Malfatti, 2022, Electrochimica Acta.

Hydrogen production by sorption enhanced steam reforming of oxygenated hydrocarbons (ethanol, glycer

I. L. Muller, A. Silva, 2011 .

Electrochemical behaviour of iron in neutral solutions of acetate and benzoate anions

C. Piatnicki, I. L. Muller, D. Azambuja, 1999 .

Electrochemical behaviour of Invar in phosphate solutions at pH=6.0

I. L. Muller, S. Amaral, E. Martini, 2004 .

Passivation of pure iron in alkaline solution containing silicate and sulphate—Galvanostatic and Potentiostatic studies

Iduvirges Lourdes Muller, I. L. Muller, S. T. Amaral, 1999 .

Tribological, electrochemical and tribo-electrochemical characterization of bare and nitrided Ti6Al4V in simulated body fluid solution.

Iduvirges Lourdes Muller, I. L. Muller, Taíse Matte Manhabosco, 2011 .

Thermodynamic analysis of ethanol steam reforming using Gibbs energy minimization method: A detailed study of the conditions of carbon deposition

Iduvirges Lourdes Muller, Célia de Fraga Malfatti, I. L. Muller, 2009 .

Modification of the La0.6Sr0.4CoO3 coating deposited on ferritic stainless steel by spray pyrolysis after oxidation in air at high temperature

E. E. Feistauer, C. Malfatti, I. L. Muller, 2013 .

Characterization of cobalt thin films electrodeposited onto silicon with two different resistivities

I. L. Muller, T. M. Manhabosco, G. Englert, 2006 .

Towards H2-rich gas production from unmixed steam reforming of methane: Thermodynamic modeling

I. L. Muller, A. Silva, 2011 .

Cell response and corrosion behavior of electrodeposited diamond-like carbon films on nanostructured titanium

I. L. Muller, T. M. Manhabosco, L. Martins, 2013 .

Corrosion behaviour of iron and AISI 304 stainless steel in tungstate aqueous solutions containing chloride

I. L. Muller, D. Azambuja, E. Martini, 2003 .

Thermodynamic study on glycerol-fuelled intermediate-temperature solid oxide fuel cells (IT-SOFCs) with different electrolytes

I. L. Muller, A. Silva, 2010 .

Beneficiation of cobalt, copper and aluminum from wasted lithium-ion batteries by mechanical processing

A. Bernardes, I. L. Muller, José F. Matos, 2015 .

Corrosion, wear and wear-corrosion behavior of graphite-like a-C:H films deposited on bare and nitrided titanium alloy

B. Neves, I. L. Muller, T. M. Manhabosco, 2013 .

Corrosion Behaviour and Biocompatibility of Titanium Screws Produced by Powder Injection Moulding (PIM) for Temporary Applications

Lirio Schaeffer, Alexandre Ferreira Galio, Iduvirges Lourdes Muller, 2011 .

Fatigue and corrosion fatigue behavior of 13Cr and duplex stainless steel and a welded nickel alloy employed in oil and gas production

I. L. Muller, R. Schroeder, I. Müller, 2009 .