Kai Zhang

发表

Effect of microtexture on short crack propagation in two-phase titanium alloys

Xinhua Wu, C. Davies, Kai Zhang, 2017 .

Effect of Heat Treatment on the Microstructure, Mechanical Properties and Corrosion Resistance of Selective Laser Melted 304L Stainless Steel

Hui Liu, A. Huang, Fan Yang, 2022, Acta Metallurgica Sinica (English Letters).

High-temperature oxidation performance of Ni-based GH3536 superalloy fabricated by laser powder bed fusion

Hui Liu, A. Huang, Huawei Zhang, 2022, npj Materials Degradation.

Mechanical Properties and Fracture Behavior of Laser Powder-Bed-Fused GH3536 Superalloy

Kai Zhang, Q. Zeng, Yingbin Chen, 2022, Metals.

Helium Bubble Growth in He+ Ions Implanted 304L Stainless Steel Processed by Laser Powder Bed Fusion During Post-Irradiation Annealing at 600 °C

Hui Liu, A. Huang, Zhuoer Chen, 2022, Acta Metallurgica Sinica (English Letters).

The influence of surface roughness on the fatigue performance of selective laser melted aluminium alloy A357

P. Rometsch, A. Huang, Xinhua Wu, 2018 .

Microstructure evolution and mechanical properties of Al-Cu-Li alloys with different rolling schedules and subsequent artificial ageing heat treatment

Yunlong Ma, Jin-feng Li, Kai Zhang, 2020 .

Enhancing high-temperature strength and ductility in laser powder bed fusion Ti–6.5Al–2Zr–1Mo–1V alloy via heat treatment optimization

A. Huang, Yuman Zhu, Kai Zhang, 2022, Materials Science and Engineering: A.

Microstructure and Texture Evolution in Double-Cone Samples of Ti-6Al-4V Alloy with Colony Preform Microstructure

Xiaoguang Yang, A. Huang, Xinhua Wu, 2015, Metallurgical and Materials Transactions A.

Fatigue crack initiation in as forged Ti–6Al–4V bars with macrozones present

A. Huang, Xinhua Wu, Kun Yang, 2015 .

Fatigue behaviour of L-DED processed Ti-6Al-4V with microstructures refined by trace boron addition

Y. Liu, M. Bermingham, A. Huang, 2022, International Journal of Fatigue.

Effects of boron addition on microstructures and mechanical properties of Ti-6Al-4V manufactured by direct laser deposition

M. Bermingham, Q. Jia, A. Huang, 2019 .

Helium bubble nucleation in Laser Powder Bed Fusion processed 304L stainless steel

J. Hou, A. Huang, Yuman Zhu, 2020, Journal of Nuclear Materials.

Effect of Deformation Reduction on Microstructure, Texture, and Mechanical Properties of Forged Ti-6Al-4V

A. Huang, Xinhua Wu, Yuman Zhu, 2021, Journal of Materials Engineering and Performance.

Evolution of microstructure, mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy prepared by direct laser fabrication

Kai Zhang, Xinhua Wu, Chris Huw John Davies, 2017 .

Microstructure, tensile properties and mechanical anisotropy of selective laser melted 304L stainless steel

J. Hou, A. Huang, Zhuoer Chen, 2020 .

Isotropic and improved tensile properties of Ti-6Al-4V achieved by in-situ rolling in direct energy deposition

A. Huang, Xinhua Wu, Yuman Zhu, 2021 .

The effect of Ag element on the microstructure characteristic evolution of an Al–Cu–Li–Mg alloy

Yunlong Ma, Jin-feng Li, Kai Zhang, 2020 .

Towards a high strength aluminium alloy development methodology for selective laser melting

Q. Jia, P. Rometsch, Xinhua Wu, 2019, Materials & Design.

Confidence level and reliability analysis of the fatigue life of CFRP laminates predicted based on fracture fatigue entropy

Jia Huang, A. Huang, Kai Zhang, 2021, International Journal of Fatigue.

Ultrastrong nanotwinned titanium alloys through additive manufacturing

H. Fraser, M. Weyland, N. Birbilis, 2022, Nature Materials.

Experimental and crystal plasticity modelling study on the crack initiation in micro-texture regions of Ti-6Al-4V during high cycle fatigue tests

Jia Huang, A. Huang, Xinhua Wu, 2021, International Journal of Fatigue.

Effects of microstructure on tensile properties of AA2050-T84 Al-Li alloy

D. Lu, Jin-feng Li, Kai Zhang, 2021 .

Correlation of textures and hemming performance of an AA6XXX aluminium alloy

A. Huang, J. Rao, Kai Zhang, 2021 .

Selective laser melted Al-7Si-0.6Mg alloy with in-situ precipitation via platform heating for residual strain removal

A. Huang, Xinhua Wu, J. Rao, 2019, Materials & Design.

Detailed investigation of quench sensitivity of 2050 Al-Cu-Li alloy by interrupted quenching method and novel end quenching method

D. Lu, Jin-feng Li, Kai Zhang, 2021 .

Multiple precipitation pathways in an Al-7Si-0.6Mg alloy fabricated by selective laser melting

A. Huang, Xinhua Wu, C. Davies, 2019, Scripta Materialia.

Effects of Post Heat Treatments on Microstructures and Mechanical Properties of Selective Laser Melted Ti6Al4V Alloy

A. Huang, Yuman Zhu, Jie Liu, 2021, Metals.

Grain boundary α-phase precipitation and coarsening: Comparing laser powder bed fusion with as-cast Ti-6Al-4V

A. Huang, Yuman Zhu, Kai Zhang, 2022, Scripta Materialia.

Improving fatigue performances of selective laser melted Al-7Si-0.6Mg alloy via defects control

A. Huang, Xinhua Wu, J. Rao, 2019 .

Revealing the Interrelation between Process Parameters and Microstructure to Promote the Mechanical Performance for Hastelloy-X

A. Huang, Yuman Zhu, Kai Zhang, 2023, SSRN Electronic Journal.

Influence of satellite and agglomeration of powder on the processability of AlSi10Mg powder in Laser Powder Bed Fusion

Zongyan Zhou, J. Hou, A. Huang, 2021 .

Achieving uniform plasticity in a high strength Al-Mn-Sc based alloy through laser-directed energy deposition

A. Huang, Yuman Zhu, Kai Zhang, 2022, Additive Manufacturing.

Characterisation of AlScZr and AlErZr alloys processed by rapid laser melting

Q. Jia, P. Rometsch, A. Huang, 2018, Scripta Materialia.

Influence of powder size on defect generation in laser powder bed fusion of AlSi10Mg alloy

Zongyan Zhou, R. Zou, A. Huang, 2023, Journal of Manufacturing Processes.

Effect of Heat Treatment on the Microstructure, Mechanical Properties and Corrosion Resistance of Selective Laser Melted 304L Stainless Steel

Hui Liu, A. Huang, Fan Yang, 2022, Acta Metallurgica Sinica (English Letters).

Evaluating impact performance of a selective laser melted 304L stainless steel with weak texture

J. Hou, A. Huang, Kai Zhang, 2020 .

Evolution of aging precipitates in an Al–Li alloy with 1.5 wt% Li concentration

Jin-feng Li, Kai Zhang, P. Ma, 2020 .

Influence of laser parameters and Ti content on the surface morphology of L-PBF fabricated Titania

Tingting Liu, Heng-An Wu, Kai Zhang, 2020 .

Discovering the role of the defect morphology and microstructure on the deformation behavior of additive manufactured Ti–6Al–4V

A. Huang, Yuman Zhu, Kai Zhang, 2022, Materials Science and Engineering: A.

Mechanical Property Evaluation of a SLMed Martensitic Stainless Steel

J. Hou, A. Huang, Songquan Wu, 2020, Acta Metallurgica Sinica (English Letters).