Young-kyun Kim

发表

Three-dimensional Monte-Carlo simulation of grain growth using triangular lattice

S. Kwun, S. Chae, Myung-Ho Kim, 2005 .

Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing

B. Almangour, D. Grzesiak, Young-kyun Kim, 2019, Composites Part B: Engineering.

In-situ carbide-reinforced CoCrFeMnNi high-entropy alloy matrix nanocomposites manufactured by selective laser melting: Carbon content effects on microstructure, mechanical properties, and deformation mechanism

Ji-Hun Yu, Hyoung-Seop Kim, Young-kyun Kim, 2021 .

Improvement in the Mechanical Properties of Additively Manufactured Ni–Co‐Based Superalloy by Tailoring Microstructures

Young-kyun Kim, Kee‐Ahn Lee, Jung-Uk Lee, 2021, Advanced Engineering Materials.

Selective laser melted CrMnFeCoNi + 3 wt% Y2O3 high-entropy alloy matrix nanocomposite: Fabrication, microstructure and nanoindentation properties

Sangsun Yang, Hyunjoo Choi, Young-kyun Kim, 2021 .

Direct energy deposition of high strength austenitic stainless steel matrix nanocomposite with superior ductility: Microstructure, tensile properties, and deformation behavior

Young-kyun Kim, Kee‐Ahn Lee, Young-Kyun Kim, 2021 .

Effect of gaseous hydrogen embrittlement on the mechanical properties of additively manufactured CrMnFeCoNi high-entropy alloy strengthened by in-situ formed oxide

J. Suh, Young-kyun Kim, Kee‐Ahn Lee, 2020 .

Compressive creep behavior of selective laser melted CoCrFeMnNi high-entropy alloy strengthened by in-situ formation of nano-oxides

Sangsun Yang, Young-kyun Kim, Kee‐Ahn Lee, 2020 .

Superior Temperature-Dependent Mechanical Properties and Deformation Behavior of Equiatomic CoCrFeMnNi High-Entropy Alloy Additively Manufactured by Selective Laser Melting

Sangsun Yang, Young-kyun Kim, Kee‐Ahn Lee, 2020, Scientific Reports.

1.45 GPa ultrastrong cryogenic strength with superior impact toughness in the in-situ nano oxide reinforced CrMnFeCoNi high-entropy alloy matrix nanocomposite manufactured by laser powder bed fusion

Young-kyun Kim, Kee‐Ahn Lee, Min-chul Kim, 2022 .

Elevated temperature compressive deformation behaviors of γ-TiAl-based Ti–48Al–2Cr–2Nb alloy additively manufactured by electron beam melting

Young-kyun Kim, Kee‐Ahn Lee, Seong-Woong Kim, 2020 .

Enhancing the creep resistance of electron beam melted gamma Ti–48Al–2Cr–2Nb alloy by using two-step heat treatment

Jae-Keun Hong, Young-kyun Kim, Kee‐Ahn Lee, 2020, Intermetallics.

Effect of post-treatment on the microstructure and tensile properties of Ni–Co-based superalloy manufactured by selective laser melting

Young-kyun Kim, Kee‐Ahn Lee, Jung-Uk Lee, 2021 .

Laser CLadding of WC/T-800 CermeT: fabriCaTion, miCrosTruCTure and Wear ProPerTies

Young-kyun Kim, Kee‐Ahn Lee, Sun-hong Park, 2021 .

Interstitial carbon content effect on the microstructure and mechanical properties of additively manufactured NiCoCr medium-entropy alloy

Sangsun Yang, Young-kyun Kim, Kee‐Ahn Lee, 2022, Journal of Alloys and Compounds.

Tuning the Microstructure and Mechanical Properties of Cold Sprayed Equiatomic CoCrFeMnNi High-Entropy Alloy Coating Layer

Young-kyun Kim, Kee‐Ahn Lee, Ji-Eun Ahn, 2020, Metals and Materials International.

High temperature oxidation behavior of Cr-Mn-Fe-Co-Ni high entropy alloy

Hyoung-Seop Kim, Young-kyun Kim, Kee‐Ahn Lee, 2018, Intermetallics.

Improved mechanical and thermophysical properties of additively manufactured Cu-Ni-Sn-P alloy by using aging treatment

Young-kyun Kim, Kee‐Ahn Lee, Sun-hong Park, 2021 .

Effect of milling temperatures on the microstructure and high temperature long-term oxidation resistance of oxide-dispersion strengthened steels

D. Seidman, J. Kim, Young-kyun Kim, 2020 .

Effects of hot isostatic pressing treatment on the microstructure and tensile properties of Ni-based superalloy CM247LC manufactured by selective laser melting

S. Seo, Young-kyun Kim, Jung-Uk Lee, 2022, Materials Science and Engineering: A.