D. Shin

发表

Microstructural evolution in a commercial low carbon steel by equal channel angular pressing

Yong-Seog Kim, D. Shin, Byung Cheol Kim, 2000 .

Plastic flow characteristics of ultrafine grained low carbon steel during tensile deformation

D. Shin, 2001 .

Deformation structures of pure Ti produced by equal channel angular pressing

Jongryoul Kim, D. Shin, Kyung-Tae Park, 2001 .

An analysis of the strain hardening behavior of ultra-fine grain pure titanium

Chong Soo Lee, Y. Ko, D. Shin, 2006 .

Incorporation of multi-walled carbon nanotubes into the oxide layer on a 7075 Al alloy coated by plasma electrolytic oxidation: Coating structure and corrosion properties

Y. Ko, D. Shin, Kangchun Lee, 2011 .

Ultrafine grained ferrite-martensite dual phase steels fabricated via equal channel angular pressing: Microstructure and tensile properties

Dong Hyuk Shin, Kyung Tae Park, Y. Son, 2005 .

Effect of annealing temperature on microstructures and mechanical properties of a 5083 Al alloy deformed at cryogenic temperature

Kyung-Tae Park, Dong Hyuk Shin, D. Shin, 2004 .

Microstructural interpretation of negligible strain-hardening behavior of submicrometer-grained low-carbon steel during tensile deformation

D. Shin, Kyung-Tae Park, 2002 .

Directional cavity stringer formation in a superplastic 7075 Al alloy

D. Shin, Kyung-Tae Park, 1999 .

New aspects on the superplasticity of fine-grained 7475 aluminum alloys

S. Nam, D. Shin, Ki Seong Kim, 1990 .

High-strain-rate superplastic behavior of equal-channel angular-pressed 5083 Al-0.2 wt pct Sc

Y. Oh, D. Shin, Kyung-Tae Park, 2004 .

Synthesis of Zirconium–Titanium oxide mixed layers on Ti substrates by plasma electrolytic oxidation and plasma-enhanced electrophoresis

B. Yoo, D. Shin, J. Choi, 2017 .

Bi and Te thin films synthesized by galvanic displacement from acidic nitric baths

Y. Choa, N. Myung, Y. Rheem, 2010 .

Annealing behavior of submicrometer grained ferrite in a low carbon steel fabricated by severe plastic deformation

D. Shin, Kyung-Tae Park, 2002 .

Constrained groove pressing and its application to grain refinement of aluminum

Jong-jin Park, Yong-Seog Kim, D. Shin, 2002 .

Microstructural Mechanisms during Dynamic Globularization of Ti-6Al-4V Alloy

Chun‐Sing Lee, C. Park, D. Shin, 2008 .

Incorporation of nitrogen in diamond by using a modulated growth technique

S. Lee, Yong Kim, Eun-Mi Kim, 2001 .

Surface void nucleation under the power-law creep condition in an Al-3 at. pct Mg solid solution alloy

S. Nam, D. Shin, K. Hong, 1991 .

Development of titanium oxide layer containing nanocrystalline zirconia particles with tetragonal structure: Structural and biological characteristics.

Y. Ko, D. Shin, Y. Kim, 2015, Colloids and surfaces. B, Biointerfaces.

Formation of fine cementite precipitates by static annealing of equal-channel angular pressed low-carbon steels

E. Lavernia, Yong-Seog Kim, D. Shin, 2001 .

Synthesis of ZnO-decorated TiO2 nanotubes for dye-sensitized solar cells

B. Yoo, D. Shin, E. S. Lee, 2013 .

Superplastic Deformation of Ultrafine Grained Al Alloy Processed by ECAP and Post-Rolling

Chun‐Sing Lee, D. Shin, Kyung-Tae Park, 2006 .

Size and distribution of particles and voids pre-existing in equal channel angular pressed 5083 Al alloy: their effect on cavitation during low-temperature superplastic deformation

Chun‐Sing Lee, D. Shin, Kyung-Tae Park, 2004 .

Effect of surface roughness on leakage current and corrosion resistance of oxide layer on AZ91 Mg alloy prepared by plasma electrolytic oxidation

B. Yoo, D. Shin, D. Hwang, 2010 .

Fatigue crack growth behavior in ultrafine grained low carbon steel

D. Shin, Ho-Kyung Kim, C. Chung, 2002 .

Fatigue properties of ultrafine grained low carbon steel produced by equal channel angular pressing

Ho-Kyung Kim, Dong Hyuk Shin, Chin-Sung Chung, 2003 .

Microstructural changes in equal channel angular pressed low carbon steel by static annealing

D. Shin, Byung Cheol Kim, Kyung-Tae Park, 2000 .

Characterization of Nickel Oxide Layers on the AZ91 Mg Alloys by Plasma Electrolytic Oxidation

B. Yoo, D. Shin, Kangchun Lee, 2010 .

The Effects of Cu Diffusion in Cu/TiN/SiO2/Si Capacitors

Kinam Kim, T. Kang, D. Shin, 1999 .

Correlation between current frequency and electrochemical properties of Mg alloy coated by micro arc oxidation

Y. Ko, D. Shin, D. Hwang, 2012 .

Characteristics of WN Diffusion Barrier Layer for Copper Metallization

Ki-Bum Kim, T. Kang, D. Shin, 1999 .

Characteristics of TiN barrier layer against Cu diffusion

T. W. Kang, D. Shin, M. Kwak, 1999 .

Strain hardening behavior of nanostructured dual-phase steel processed by severe plastic deformation

Y. Ko, D. Shin, C. Lee, 2010 .

Surface characteristics of ZrO2-containing oxide layer in titanium by plasma electrolytic oxidation in K4P2O7 electrolyte

Y. Ko, D. Shin, K. Shin, 2012 .

Effect of electrolyte on surface properties of pure titanium coated by plasma electrolytic oxidation

Y. Ko, D. Shin, K. Shin, 2011 .

Low-temperature superplastic behavior of a submicrometer-grained 5083 Al alloy fabricated by severe plastic deformation

D. Shin, Kyung-Tae Park, D. Hwang, 2002 .

Effect of heating rate on the combustion synthesis of intermetallics

Jong-Hyun Lee, Yong-Seog Kim, D. Shin, 2000 .

Incorporation of Carbon Nanotubes Into Oxide Layer on 7075 Al Alloy by Plasma Electrolytic Oxidation

B. Yoo, D. Shin, E. S. Lee, 2011 .

Effect of Undercooling of Austenite on Strain Induced Ferrite Transformation Behavior

D. Shin, K. Lee, K. Lee, 2003 .

Superplastic Characteristics and Diffusion Bonding of Ti-6Al-4V Alloy

H. Lee, Y. Yi, D. Shin, 2007 .

Microstructural influence on low-temperature superplasticity of ultrafine-grained Ti–6Al–4V alloy

Y. Ko, D. Shin, C. Lee, 2005 .

Deformation characteristics of submicrocrystalline Ti–6Al–4V

Chun‐Sing Lee, Y. Ko, D. Shin, 2008 .

High strain rate superplasticity of submicrometer grained 5083 Al alloy containing scandium fabricated by severe plastic deformation

D. Shin, Kyung-Tae Park, D. Hwang, 2003 .

A study on diffusion bonding of superplastic Ti-6Al-4V ELI grade

Ho Sung Lee, Jong-Hoon Yoon, Young Gun Ko, 2007 .

Inhibition of abnormal grain growth during isothermal holding after heavy deformation in Nb steel

Seung-Chan Hong, D. Shin, K. Lee, 2002 .

High-Temperature Deformation Behavior of ELI Grade Ti-6Al-4V Alloy with Martensite Microstructure

Chun‐Sing Lee, H. Lee, C. Park, 2007 .

Cavitation damage incorporating cavity growth in submicrometer-grained titanium alloy

Chun‐Sing Lee, Y. Ko, D. Shin, 2009 .

Factors influencing the equal-channel angular pressing of Ti-6Al-4V alloy having lamellar microstructure

Sunghak Lee, Y. Ko, D. Shin, 2008 .

Cavitation Behavior of Ultra-Fine Grained Ti-6Al-4V Alloy Produced by Equal-Channel Angular Pressing

Y. Ko, D. Shin, Yongnam Kwon, 2007 .

Superplastic deformation behavior of ultra-fine-grained 5083 Al alloy using load-relaxation tests

Y. Ko, D. Shin, Kyung-Tae Park, 2007 .

Heat dissipation properties of oxide layers formed on 7075 Al alloy via plasma electrolytic oxidation

Y. Ko, D. Shin, H. Yang, 2015 .

In vitro biological response to the oxide layer in pure titanium formed at different current densities by plasma electrolytic oxidation

Y. Ko, D. Shin, H. Yang, 2014 .

Effects of Nb on strain induced ferrite transformation in C–Mn steel

Hyun Seon Hong, Dong Hyuk Shin, Seung-Chan Hong, 2003 .

Strain bursts in the cyclic creep of Al-1%Mg solid solution alloy

S. Nam, D. Shin, K. Hong, 1988 .

Mechanical and electrical responses of nanostructured Cu–3 wt%Ag alloy fabricated by ECAP and cold rolling

Y. Ko, D. Shin, B. Lee, 2010 .

Thermal stability and mechanical properties of ultrafine grained low carbon steel

Yong-Seog Kim, D. Shin, Kyung-Tae Park, 2000 .

Corrosion resistance of oxide layers formed on AZ91 Mg alloy in KMnO4 electrolyte by plasma electrolytic oxidation

B. Yoo, Deok-Yong Park, D. Shin, 2009 .

Influence of potassium pyrophosphate in electrolyte on coated layer of AZ91 Mg alloy formed by plasma electrolytic oxidation

B. Yoo, D. Shin, D. Hwang, 2009 .

Deposition of hydroxyl-apatite on titanium subjected to electrochemical plasma coating

Y. Ko, S. Yoon, D. Shin, 2013 .

Plasma Electrolytic Oxidation of AZ91 Mg Alloy in the Sodium Stannate Electrolyte

B. Yoo, D. Shin, D. Hwang, 2008 .

Spheroidization of Low Carbon Steel Processed by Equal Channel Angular Pressing

Yong-Seog Kim, D. Shin, Kyung-Tae Park, 2003 .

The thermal behavior of aluminum 5083 alloys deformed by equal channel angular pressing

Sok-Won Kim, D. Shin, Sanghyun Lee, 2010 .

Effect of ECAP on microstructure and mechanical properties of a commercial 6061 Al alloy produced by powder metallurgy

D. Shin, S. Chang, Seunggyu Choi, 2003 .

Electrochemical response of ZrO2-incorporated oxide layer on AZ91 Mg alloy processed by plasma electrolytic oxidation

B. Yoo, D. Shin, Kangchun Lee, 2011 .

Influence of Post-Annealing on the Oxide Layer of AZ91 Mg Alloy Prepared by Plasma Electrolytic Oxidation

Y. Ko, B. Yoo, D. Shin, 2010 .

Structure and corrosion behavior of oxide layer with Zr compounds on AZ31 Mg alloy processed by two-step plasma electrolytic oxidation

M. A. F. Sani, B. Yoo, D. Shin, 2014 .

Microstructure and tensile properties of bi-materials with macro-interface between unreinforced magnesium and composite

D. Shin, S. Chang, Sungkil Hong, 2001 .

Thermal stability of nanostructured Cr3C2-NiCr coatings

J. Schoenung, E. Lavernia, Jianhong He, 2000 .

Microstructure development during equal-channel angular pressing of titanium

S. Semiatin, Jongryoul Kim, Yong-Seog Kim, 2003 .

Correlation between KOH concentration and surface properties of AZ91 magnesium alloy coated by plasma electrolytic oxidation

Y. Ko, D. Shin, S. Namgung, 2010 .

Influence of zirconia on biomimetic apatite formation in pure titanium coated via plasma electrolytic oxidation

Y. Ko, D. Shin, K. Shin, 2010 .

Effect of repetitive equal channel angular pressing on microstructural stability of low carbon steel

J. Pak, D. Shin, Young Kuk Kim, 2001 .

Microstructural characteristics of oxide layers formed on Mg–9 wt%Al–1 wt%Zn alloy via two-step plasma electrolytic oxidation

Y. Ko, D. Shin, Kangchun Lee, 2014 .

Effects of Current Density on Microstructure and Corrosion Property of Coating on AZ31 Mg Alloy Processed via Plasma Electrolytic Oxidation

M. A. F. Sani, Y. Ko, D. Shin, 2014 .

Evaluation of plasma temperature during plasma oxidation processing of AZ91 Mg alloy through analysis of the melting behavior of incorporated particles

B. Yoo, S. Yoon, D. Shin, 2012 .

Incorporation of carbon nanotubes into micro-coatings film formed on aluminum alloy via plasma electrolytic oxidation

Y. Ko, D. Shin, Kangchun Lee, 2011 .

Influence of voltage waveform on anodic film of AZ91 Mg alloy via plasma electrolytic oxidation: Microstructural characteristics and electrochemical responses

Y. Ko, D. Shin, E. S. Lee, 2014 .

Enhancement of high strain rate superplastic elongation of a modified 5154 Al by subsequent rolling after equal channel angular pressing

D. Shin, Kyung-Tae Park, W. Nam, 2004 .

Characterization of plasma electrolytic oxide formed on AZ91 Mg alloy in KMnO4 electrolyte

B. Yoo, Deok-Yong Park, D. Shin, 2009 .

Mechanisms of microstructure evolution during cryomilling in the presence of hard particles

J. Schoenung, Jianhong He, D. Shin, 2003 .

Effects of concentration of Ag nanoparticles on surface structure and in vitro biological responses of oxide layer on pure titanium via plasma electrolytic oxidation

Y. Ko, D. Shin, H. Yang, 2015 .

Effect of Pulse Frequency on Corrosion Behavior of AZ91 Mg Alloy Treated by Microarc Discharge Oxidation Coating

Y. Ko, D. Shin, Kangchun Lee, 2011 .

Electrochemical Corrosion Properties of AZ91 Mg Alloy via Plasma Electrolytic Oxidation and Subsequent Annealing

Y. Ko, D. Shin, Kangchun Lee, 2011 .

Corrosion response of annealed oxide film of pure Mg via plasma electrolytic oxidation in an electrolyte containing KMnO4

Y. Ko, D. Shin, B. Lee, 2011 .

Twin-Roll Cast Al-Clad Magnesium Alloy

D. Shin, J. H. Bae, Geun Tae Bae, 2009 .

Dynamic Torsional Deformation Behavior of Ultra-Fine-Grained Dual-Phase Steel Fabricated by Equal Channel Angular Pressing

Sunghak Lee, B. Hwang, D. Shin, 2007 .

Effect of ammonium metavanadate on surface characteristics of oxide layer formed on Mg alloy via plasma electrolytic oxidation

Y. Ko, D. Shin, Kangchun Lee, 2013 .

Effect of icosahedral phase on growth behavior of thin oxide film on MgZn12Y1.7 alloy via micro arc oxidation

Y. Ko, D. Shin, Kangchun Lee, 2013 .

Combination of Carbon Nanotube and Alumina by Plasma Chemical Coating

Kang Min Lee, Young Gun Ko, Bong Kwon Chung, 2013 .

Formation of uniform passive oxide layers on high Si content Al alloy by plasma electrolytic oxidation

B. Yoo, D. Shin, Y. M. Kim, 2010 .

Tensile deformation characteristics of a nano-structured 5083 Al alloy

D. Shin, S. Kamado, Y. Kojima, 2005 .

Tensile Deformation and Fracture Behavior of a Commercial Al Alloy with Nano-Sized Grains

D. Shin, Seong-Hee Lee, S. Chang, 2004 .

Grain refinement mechanism during equal-channel angular pressing of a low-carbon steel

Jongryoul Kim, D. Shin, Kyung-Tae Park, 2001 .

Reappraisal of grain boundary diffusion creep equations for nanocrystalline materials

Yong Shin Lee, Chun‐Sing Lee, D. Shin, 2006 .

The Low Cycle Fatigue Behavior of Equal-Channel Angular Pressed Al 5052 Alloy

S. Kwun, D. Shin, W. H. Kim, 2008 .

Tensile Deformation Characteristics of Commercial Mg Alloys Processed by Equal Channel Angular Pressing

Sang Wan Lee, Young Seok Kim, D. Shin, 2004 .

Effects of grain size and pressing speed on the deformation mode of commercially pure Ti during equal channel angular pressing

Jongryoul Kim, D. Shin, Kyung-Tae Park, 2003 .

Effect of Equal Channel Angular Pressing on the Distribution of Reinforcements in the Discontinuous Metal Matrix Composites

D. Shin, Kyung-Tae Park, S. Chang, 2002 .

Microstructures and mechanical properties of equal-channel angular pressed low carbon steel

Jongryoul Kim, D. Shin, Kyung-Tae Park, 2000 .

Grain refinement of a commercial 0.15%C steel by equal-channel angular pressing

W. Kim, D. Shin, W. Choo, 1999 .

Deformation Mechanism of Severely Deformed CP-Titanium by Uniaxial Compression Test

Jongryoul Kim, D. Shin, I. Kim, 2008 .

Texture and Mechanical Properties of ECA-Pressed Ti

S. Hwang, S. Yu, D. Shin, 2007 .

Shear strain accommodation during severe plastic deformation of titanium using equal channel angular pressing

Jongryoul Kim, Yuntian Zhu, D. Shin, 2002 .

Stability of channels at a scalloplike Cu 6 Sn 5 layer in solder interconnections

Jong-Hyun Lee, Yong-Seog Kim, D. Shin, 2001 .

Effect of ECAP Strain on Deformation Behavior at Low Temperature Superplastic Regime of Ultrafine Grained 5083 Al Alloy Fabricated by ECAP

D. Shin, Kyung-Tae Park, C. Lee, 2004 .

Microstructures and magnetic properties of amorphous Fe–Si–B–Ni alloy ribbons

Jongryoul Kim, D. Shin, Y. Jang, 2000 .

Spheroidization of medium carbon steel fabricated by continuous shear drawing

Y. Ko, D. Shin, D. Lee, 2010 .

Microstructural development of adiabatic shear bands in ultra-fine-grained low-carbon steels fabricated by equal channel angular pressing

Yong Chan Kim, Sunghak Lee, B. Hwang, 2006 .

Fabrication of Ultrafine Grained Ferrite/Martensite Dual Phase Steel by Severe Plastic Deformation

D. Shin, Kyung-Tae Park, Young Kook Lee, 2005 .

Microstructural stability of ultrafine grained low-carbon steel containing vanadium fabricated by intense plastic straining

Yong-Seog Kim, D. Shin, Kyung-Tae Park, 2001 .

Ultrafine grained steels processed by equal channel angular pressing

D. Shin, Kyung-Tae Park, 2005 .

Effect of Heat Treatment on Microstructures and Tensile Properties of Ultrafine Grained C-Mn Steel Containing 0.34 mass% V

Young‐kook Lee, D. Shin, Kyung-Tae Park, 2004 .

Effect of equal channel angular pressing on structure and mechanical properties of a low carbon steel

Jongryoul Kim, D. Shin, W. Jeong, 2001 .

Microstructural evolution and plastic flow behavior of As-equal channel angular pressed 5083 Al alloy in low temperature superplasticity regime

D. Shin, Kyung-Tae Park, D. Hwang, 2002, Metals and Materials International.

Fatigue properties of ultra-fine grained dual phase ferrite/martensite low carbon steel

Mitsuhiro Okayasu, D. Y. Hwang, M. Okayasu, 2008 .

Analysis on the anelasticity of a superplastic Zn–22% Al eutectoid

W. Kim, D. Shin, Kyung-Tae Park, 2002 .

High-strain-rate superplastic behavior of ingot-processed Al-Mg-Fe alloy

W. Kim, J. K. Kim, D. Shin, 1998 .

Superplasticity of fine-grained 7475 Al alloy and a proposed new deformation mechanism

W. Kim, D. Shin, C. Lee, 1997 .

Effects of grain boundary deformation on the creep transition under the power law regime in an AlMg solid solution alloy

S. Nam, D. Shin, K. Hong, 1992 .

Effect of post-rolling after ECAP on deformation behavior of ECAPed commercial Al–Mg alloy at 723 K

D. Shin, Kyung-Tae Park, C. Lee, 2005 .

Microstructures and Mechanical Properties of Equal Channel Angular Pressed 5083 Al Alloy

D. Shin, Kyung-Tae Park, S. Chang, 2001 .

A study of the role of vacancies in cyclic creep

S. Nam, D. Shin, I. Choi, 1983 .

Ultrafine Grained Low Carbon Steels Fabricated by Equal Channel Angular Pressing: Microstructures and Tensile Properties

Young‐kook Lee, D. Shin, Kyung-Tae Park, 2002 .

Superplastic behaviour of 7475 aluminium alloy

D. Shin, S. Maeng, 1989 .

Effect of heat treatment on tensile properties of component with macro-interface between unreinforced magnesium and composite

D. Shin, Young Kuk Kim, S. Chang, 2001 .

Superplastic Behavior of Ultrafine Grained Al Alloys Fabricated by Severe Plastic Deformation

Y. Ko, D. Shin, Kyung-Tae Park, 2007 .

The effect of cyclic stressing on the Portevin-LeChatelier effect in Al-1.5% Mg alloy

S. Nam, D. Shin, 1985 .

Grain elongation in a superplastic 7075 Al alloy

D. Shin, Kyung-Tae Park, Y. Joo, 1999 .

Equal Channel Angular Pressing of Steels (BCC), Al Alloys (FCC) and Pure Titanium (HCP)

Yong-Seog Kim, D. Shin, Kyung-Tae Park, 2013 .

Dynamic deformation and fracture behavior of ultrafine-grained aluminum alloy fabricates by equal-channel angular pressing

Sunghak Lee, B. Hwang, D. Shin, 2005 .

Effect of annealing temperature on tensile behavior of 5052 Al alloy deformed at cryogenic temperature

D. Shin, Young Bum Lee, W. Nam, 2005 .

Microstructural evolution during superplastic deformation of a 7475 Al alloy

W. Kim, D. Shin, Y. Joo, 1998 .

Dry Sliding Wear Behavior of Ultrafine Grained Commercial Purity Aluminum and Low Carbon Steel Produced by Severe Plastic Deformation Techniques

T. Lee, W. Kim, D. Shin, 2013 .

Apparent grain growth behavior of submicrometer grained Al-3 Pct Mg during static annealing after fabrication by severe plastic straining

D. Shin, Kyung-Tae Park, H. Kwon, 2001 .

Microstructures and Mechanical Properties of Ultra Low Carbon IF Steel Processed by Accumulative Roll Bonding Process

D. Shin, Kyung-Tae Park, Seong-Hee Lee, 2002 .

Development of deformation structures in low carbon steel by equal channel angular pressing

Jongryoul Kim, D. Shin, I. Kim, 2001 .

Fabrication of Ultrafine Grained Aluminum by Differential Speed Accumulative Roll-Bonding (ARB) Process

T. Sakai, D. Shin, Seong-Hee Lee, 2003 .

Acoustic Emission Behavior during Tensile Tests of Low Carbon Steel Welds

Dong Hyuk Shin, D. Shin, C. Lee, 1999 .

Effect of Rolling Direction on the Microstructure and Mechanical Properties of Accumulative Roll Bonding (ARB) Processed Commercially Pure 1050 Aluminum Alloy

Dong Hyuk Shin, D. Shin, Yong-Suk Kim, 2006 .

Reliability of composite solder bumps produced by an in-situ process

Jong-Hyun Lee, Yong-Seog Kim, D. Shin, 2000 .

Dissolution of Cu into Sn-based solders during reflow soldering

Jong Hyun Lee, Yong-Seog Kim, D. Shin, 2003 .

Characteristics of the Sn-Pb eutectic solder bump formed via fluxless laser reflow soldering

Jong-Hyun Lee, Yong-Seog Kim, D. Shin, 2000 .

Kinetics of Au-containing ternary intermetallic redeposition at solder/UBM interface

Yong-Seog Kim, Dong Hyuk Shin, Jong-Hyun Lee, 2001 .

Transparent Ga-doped zinc oxide-based window heaters fabricated by pulsed laser deposition

Hyun Jae Kim, A. Moujoud, S. Oh, 2008 .

Dynamic deformation behavior of ultrafine-grained low-carbon steels fabricated by equal-channel angular pressing

Sunghak Lee, B. Hwang, H. Lee, 2005 .

Recovery of Molybdenum from Spent Acid by Ammonia Gas Neutralization

J. Pak, D. Shin, Jong-Oh Jo, 2008 .

Features of Texture and Structure Development in Zirconium under Equal Channel Angular Pressing

M. Isaenkova, S. Hwang, S. Yu, 2006 .

Dynamic Deformation of Submicrocrystalline Aluminum Alloys

Y. Ko, D. Shin, Y. Kim, 2010 .

Effect of equal-channel angular pressing routes on high-strain-rate deformation behavior of ultra-fine-grained aluminum alloy

Sunghak Lee, Y. Ko, D. Shin, 2010 .

Effect of carbon content on etching response for identification of plastic deformation zones in carbon steels

M. Okayasu, M. Mizuno, D. Shin, 2008 .

Microstructure and Texture of Zirconium and Titanium Grain Refined by Equal Channel Angular Pressing

S. Hwang, S. Yu, D. Shin, 2007 .

Annealing behavior of 5083 Al alloy deformed at cryogenic temperature

D. Shin, Young Bum Lee, W. Nam, 2005 .

Deformation mechanisms of pure Ti during equal channel angular pressing

Jongryoul Kim, D. Shin, I. Kim, 2002, Metals and Materials International.

Diffusion Bonding Process for Aerospace Components

H. Lee, D. Shin, Jong-Hoon Yoon, 2011 .

Fabrication of Sandwich Structure with Superplastic Forming Process from Diffusion Bonded Ti-6Al-4V Sheets

H. Lee, Y. Yi, D. Shin, 2007 .

Dynamic deformation and fracture behavior of ultra-fine-grained pure copper fabricated by equal channel angular pressing

Sunghak Lee, B. Hwang, D. Shin, 2009 .

Sliding Wear Characteristics of Ultrafine-Grained Non-Strain-Hardening Aluminum-Magnesium Alloys

D. Shin, Yong Suk Kim, J. Ha, 2005 .

Microstructural Evolution and Mechanical Properties of Ultrafine Grained Commercially Pure 1100 Aluminum Alloy Processed by Accumulative Roll-Bonding (ARB)

Dong Hyuk Shin, D. Shin, Yong-Suk Kim, 2004 .

Effect of Annealing on the Impurities of 6H–SiC Single Crystals

D. Shin, S. Vlaskina, 1999 .

6H to 3C Polytype Transformation in Silicon Carbide

D. Shin, S. Vlaskina, 1999 .

Quantitative Analysis of Precipitation Behavior in Ferrite of V Added Microalloyed Steel

Sang Hwan Lee, D. Shin, Kyung Sub Lee, 2004 .

Effect of Yttrium on High Temperature Strength of Magnesium

D. Shin, Tatsuo Sato, S. Chang, 2001 .

Reflow characteristics of Sn-Ag matrix in-situ composite solders

Yong-Seog Kim, Dong Hyuk Shin, J. Heo, 2000 .

Formation of ZrO2 in coating on Mg-3 wt.%Al-1 wt.%Zn alloy via plasma electrolytic oxidation: Phase and structure of zirconia

J. Park, Y. Ko, D. Shin, 2015 .