Dayong Li

发表

Study on Metal Forming by Macro-Micro Combine Numerical Analysis

Ying-hong Peng, S. Zhang, Dayong Li, 2007 .

Clamp forming of local features on sheet metals

Dayong Li, Zhiheng Zhang, Zhenye Liang, 2020 .

A stabilized underintegrated enhanced assumed strain solid-shell element for geometrically nonlinear plate/shell analysis

Ying-hong Peng, Dayong Li, L. M. Li, 2011 .

Optimization of die design for thin-walled flat multi-port tube with the aid of finite element simulation

Ying-hong Peng, Huamiao Wang, Dayong Li, 2020 .

Flower pattern and roll positioning design for the cage roll forming process of ERW pipes

Ying-hong Peng, Dayong Li, Weiye Chen, 2019, Journal of Materials Processing Technology.

A numerical study on chain-die forming of the AHSS U-channel and contrast with roll forming

R. H. Wagoner, Shu-hui Li, H. Bong, 2018 .

Axial formation and cross-section distortion control for stretch bending based on batch simulations

Ying-hong Peng, Dayong Li, T. Zou, 2020 .

The elastic–plastic transition of metals

R. H. Wagoner, H. Bong, Dayong Li, 2016 .

A polycrystal plasticity based thermo-mechanical-dynamic recrystallization coupled modeling method and its application to light weight alloys

Ying-hong Peng, Liming Peng, Huamiao Wang, 2019, International Journal of Plasticity.

Dynamic recrystallisation and dynamic precipitation in AA6061 aluminium alloy during hot deformation

Ying-hong Peng, S. Zhang, Dayong Li, 2014 .

An analytical model for rapid prediction and compensation of springback for chain-die forming of an AHSS U-channel

Dayong Li, Zhiheng Zhang, Zhenye Liang, 2019, International Journal of Mechanical Sciences.

In situ neutron diffraction and crystal plasticity analysis on Q&P1180 steel during plastic deformation

Ying-hong Peng, Huamiao Wang, Dayong Li, 2020 .

Numerical and experimental study on expansion forming of inner grooved tube

Yinghong Peng, Dayong Li, Ying-hong Peng, 2009 .

Finite Element Simulation of Chain-Die Forming U Profiles with Variable Cross-Section

Dayong Li, S. Ding, H.L. Huang, 2017 .

In situ synthesised WC reinforced nickel coating by laser cladding

D. Shu, Zhu-guo Li, Dayong Li, 2018 .

Shear band development under simple shear and the intrinsicality of strain softening of amorphous glassy polymers

Ying-hong Peng, Dayong Li, Weiqin Tang, 2022, Polymer.

Modelling continuous dynamic recrystallization of aluminum alloys based on the polycrystal plasticity approach

Myoung-Gyu Lee, Dayong Li, H. Lee, 2020 .

Effects of Residual Strain on Grain Growth of Extruded Aluminum Micro-channel Tubes During Heat Treatment

Ying-hong Peng, Huamiao Wang, Dayong Li, 2021, Forming the Future.

Microstructure and mechanical properties development of micro channel tubes in extrusion, rolling and brazing

Ying-hong Peng, Huamiao Wang, Dayong Li, 2018, Materials Characterization.

Microstructure development and texture evolution of aluminum multi-port extrusion tube during the porthole die extrusion

Ying-hong Peng, Dayong Li, Wenli Fang, 2016 .

Probing Laves phase formation in Ni-alloy during ultrasonic arc-welding with atomistic modelling

Hao Lu, Xiaoqi Chen, Dayong Li, 2018, Science and Technology of Welding and Joining.

A polycrystal plasticity based discontinuous dynamic recrystallization simulation method and its application to copper

Ying-hong Peng, Guowei Zhou, H. Zurob, 2017 .

Polycrystal plasticity simulation of extrusion of a magnesium alloy round bar: Effect of strain path non-uniformity

Ying-hong Peng, Liming Peng, S. Zhang, 2018 .

Evolution of Microstructure and Texture During Uniaxial Compression of Cast AZ31Mg Alloy at Elevated Temperatures

Ying-hong Peng, J. Allison, Dayong Li, 2012, Metallography, Microstructure, and Analysis.

Evolution of the Material Microstructures and Mechanical Properties of AA1100 Aluminum Alloy within a Complex Porthole Die during Extrusion

Ying-hong Peng, Huamiao Wang, Dayong Li, 2018, Materials.

1 Evolution of the Material Microstructures and 2 Mechanical Properties of A 1100 Aluminum Alloy 3 within a Complex Porthole Die during Extrusion 4

Ying-hong Peng, Huamiao Wang, Dayong Li, 2018 .

On Formation of Abnormally Large Grains in Annealing Prestrained Aluminum Alloy Multiport Extrusion Tubes

Ying-hong Peng, D. Shu, Dayong Li, 2019, Metallurgical and Materials Transactions A.

Unloading behaviors of the rare-earth magnesium alloy ZE10 sheet

Ying-hong Peng, Huamiao Wang, D. Steglich, 2020 .

Strength Variation in Processing Multiport Extrusion Tubes of A1100 and A3102 Alloys

Ying-hong Peng, D. Shu, Dayong Li, 2019, Journal of Materials Engineering and Performance.

Polycrystal modeling of hot extrusion texture of AZ80 magnesium alloy

Ying-hong Peng, Guowei Zhou, S. Zhang, 2016 .

Modeling of Extrusion Texture of AZ31 Magnesium Alloy with Consideration of Dynamic Recrystallization

Dayong Li, Weiqin Tang, Tao Tang, 2014 .

Experimental Study on Texture Evolution of Mg-Y Magnesium Alloy in Extrusion

Ying-hong Peng, Dayong Li, Weiqin Tang, 2021, Forming the Future.

Effects of fabric architectures on mechanical and damage behaviors in carbon/epoxy woven composites under multiaxial stress states

Ying-hong Peng, X. Su, Qingping Sun, 2020 .

A crystal plasticity study on the deformation of an AZ31 alloy sheet under elevated temperature

Ying-hong Peng, Guowei Zhou, Dayong Li, 2018, Journal of Physics: Conference Series.

Misorientation development in continuous dynamic recrystallization of AZ31B alloy sheet and polycrystal plasticity simulation

Ying-hong Peng, Huamiao Wang, Guowei Zhou, 2018, Materials Science and Engineering: A.

Experiment and crystal plasticity analysis on plastic deformation of AZ31B Mg alloy sheet under intermediate temperatures: How deformation mechanisms evolve

Ying-hong Peng, M. Jain, Guowei Zhou, 2016 .

Compensate for longitudinally discrepant springback and bow in chain-die forming processes by multiple sections optimization

Ying-hong Peng, Wei Dai, Dayong Li, 2022, The International Journal of Advanced Manufacturing Technology.

High Temperature Behaviors of a Casting Nickel-Based Superalloy Used for 815 °C

Ying-hong Peng, Changlin Yang, D. Shu, 2021, Materials.

The numerical and analytical study on stretch flanging of V-shaped sheet metal

Ping Hu, Dayong Li, Yinghong Peng, 2007 .

Analysis of the crushing behaviors of woven carbon fiber reinforced plastic hat section component under dynamic bending and axial crushing loading

Ying-hong Peng, Haibin Tang, X. Su, 2021 .

Crushing behaviors of unidirectional carbon fiber reinforced plastic composites under dynamic bending and axial crushing loading

Ying-hong Peng, J. Fenner, X. Su, 2020, International Journal of Impact Engineering.

Effect of Rate Sensitivity on Necking Behavior of a Laminated Tube Under Dynamic Loading

Peidong Wu, Dayong Li, D. Lloyd, 2014 .

Crystal plasticity based modeling of grain boundary sliding in magnesium alloy AZ31B sheet

Ying-hong Peng, Huamiao Wang, Guowei Zhou, 2021 .

Process parameter effects on solidification behavior of the superalloy during investment casting

Ying-hong Peng, A. Dong, D. Shu, 2019, Materials and Manufacturing Processes.

Modeling texture evolution during rolling process of AZ31 magnesium alloy with elasto-plastic self consistent model

Ying-hong Peng, S. Zhang, Dayong Li, 2011 .

Modeling twinning, detwinning, and dynamic recrystallization of magnesium alloys

Ying-hong Peng, G. Proust, Huamiao Wang, 2019, MRS bulletin.

Fabrication of high-strength Mg-Gd-Zn-Zr alloys via differential-thermal extrusion

Yujuan Wu, Dayong Li, Tao Tang, 2017 .

Effects of Dynamic Recrystallization in Extruded and Compressed AZ31 Magnesium Alloy

范晓慧, Ying-hong Peng, S. Zhang, 2010 .

Influence of extrusion parameters on grain size and texture distributions of AZ31 alloy

Ying-hong Peng, S. Zhang, Dayong Li, 2011 .

Forming limits of magnesium alloy AZ31B sheet at elevated temperatures

Ying-hong Peng, M. Jain, Guowei Zhou, 2020 .

Strain rate sensitivities of deformation mechanisms in magnesium alloys

Ying-hong Peng, M. Worswick, Huamiao Wang, 2018 .

In situ synthesized high volume fraction WC reinforced Ni-based coating by laser cladding

D. Shu, Kebing Zhang, Dayong Li, 2017 .

Effects of Direct Extrusion Process on Microstructure, Texture Evolution and Yield Strength of Magnesium Alloy AZ31

Ying-hong Peng, J. Allison, S. Zhang, 2012 .

Physical simulation of investment casting for GTD-222 Ni-based superalloy processed by controlled cooling rates

Ying-hong Peng, A. Dong, D. Shu, 2019, The International Journal of Advanced Manufacturing Technology.

Reversible photodriven droplet motion on Ti3C2 MXene film for diverse liquids.

Ying-hong Peng, Jiayan Luo, A. Dong, 2020, ACS applied materials & interfaces.

Experimental and Numerical Study on Friction and Wear Performance of Hot Extrusion Die Materials

Ying-hong Peng, Huamiao Wang, Dayong Li, 2022, Materials.

Influence of laser process on the porosity-related defects, microstructure and mechanical properties for selective laser melted AlSi10Mg alloy

Ying-hong Peng, W. Lai, C. Engler-Pinto, 2022, The International Journal of Advanced Manufacturing Technology.

Studying the micromechanical behaviors of a polycrystalline metal by artificial neural networks

Ying-hong Peng, C. Tomé, Huamiao Wang, 2021 .

The nature of yielding and anelasticity in metals

R. H. Wagoner, Dayong Li, R. Wagoner, 2021 .

Yield strength development from high strength steel plate to UOE pipe

Ying-hong Peng, Dayong Li, Guanghan Wu, 2016 .

A numerical method for predicting O-forming gap in UOE pipe manufacturing

Dayong Li, Yinghong Peng, Tianxia Zou, 2015 .

Numerical study on the X80 UOE pipe forming process

Yinghong Peng, Tianxia Zou, Dayong Li, 2015 .

Crystal plasticity modeling and neutron diffraction measurements of a magnesium AZ31B plate: Effects of plastic anisotropy and surrounding grains

Ying-hong Peng, S. Lee, Huamiao Wang, 2020 .

Experiment and modeling on fatigue of the DP780GI spot welded joint

Dayong Li, Yinghong Peng, Shiyao Huang, 2017 .

A method for determining r-value of aluminum sheets with the Portevin-Le Chatelier effect

L. Zhuang, M. Guo, K. Yu, 2021 .

Experimental Investigation on the Effects of Fabric Architectures on Mechanical and Damage Behaviors of Carbon/Epoxy Woven Composites.

Ying-hong Peng, X. Su, Qingping Sun, 2021, Composite structures.

Effect of Die Design in Microchannel Tube Extrusion

Ying-hong Peng, Dayong Li, Wenli Fang, 2014 .

Experimental and numerical evaluations on the effects of adhesive fillet, overlap length and unbonded area in adhesive‐bonded joints

Ying-hong Peng, W. Lai, X. Su, 2020 .

Analysis and suppression of flange wrinkling in AHSS chain-die forming channels with a curved axis

Ying-hong Peng, Dayong Li, Zhenye Liang, 2021, Journal of Manufacturing Processes.

Prediction of high cycle fatigue strength for additive manufactured metals by defects incorporated crystal plasticity modeling

Ying-hong Peng, W. Lai, C. Engler-Pinto, 2023, Materials Science and Engineering: A.

Forming of Metal Channels with Local Features by Chain-die Forming

Dayong Li, Zhenye Liang, S. Ding, 2022, Journal of Materials Processing Technology.

The role of rough surface in the size-dependent behavior upon nano-indentation

Ying-hong Peng, Huamiao Wang, Dayong Li, 2021 .

The polycrystalline plasticity due to slip and twinning during magnesium alloy forming

Ying-hong Peng, S. Zhang, Dayong Li, 2010 .

Numerical analysis of influence of micro-parameters on macro-micromechanical properties of fiber reinforced metal matrix composites

Ying-hong Peng, S. Zhang, Dayong Li, 2008 .

Phase constituents and growth mechanism of laser in situ synthesized WC reinforced composite coating with W–C–Ni system

D. Shu, Kebing Zhang, Dayong Li, 2017 .

Deep learning approach for defective spot welds classification using small and class-imbalanced datasets

Ying-hong Peng, Huamiao Wang, Wei Dai, 2022, Neurocomputing.

Experiment and Simulation Study on Unidirectional Carbon Fiber Composite Component under Dynamic Three-Point Bending Loading

X. Su, Qingping Sun, D. Zeng, 2018 .

Numerical simulation of sheet metal stamping by using ODF data

Ying-hong Peng, S. Zhang, Dayong Li, 2009 .

Engineering computing and data-driven for gating system design in investment casting

Ding Tang, Yinghong Peng, Donghong Wang, 2020, The International Journal of Advanced Manufacturing Technology.

Springback and longitudinal bow in chain-die forming U and hat channels

Ying-hong Peng, Dayong Li, Zhenye Liang, 2021, The International Journal of Advanced Manufacturing Technology.

Reduction of Laves phase in nickel-alloy welding process under ultrasonic Ampère’s force

Hao Lu, Dayong Li, C. Hua, 2018 .

The experimental investigation on chain-die forming U-profiled AHSS products

William J.T. Daniel, Shichao Ding, Zhaobing Liu, 2015 .

Experimental Analysis of Warping Defects in Chain-die Forming Variable-width Profiles

Ying-hong Peng, Dayong Li, Zhenye Liang, 2020, IOP Conference Series: Materials Science and Engineering.

Predictive modelling of longitudinal bow in Chain-die formed AHSS profiles and its experimental verification

P. Meehan, W. Daniel, Dayong Li, 2019, Journal of Manufacturing Processes.

On the role of yttrium in microstructure evolution and texture modification during magnesium alloy extrusion

Ying-hong Peng, Huamiao Wang, Guowei Zhou, 2020 .

Simulation of magnesium alloy AZ31 sheet during cylindrical cup drawing with rate independent crystal plasticity finite element method

Ying-hong Peng, S. Zhang, Dayong Li, 2009 .

Stretch bending process design by machine learning

Ying-hong Peng, Dayong Li, T. Zou, 2022, The International Journal of Advanced Manufacturing Technology.

Online quality inspection of resistance spot welding for automotive production lines

Ying-hong Peng, Huamiao Wang, Wei Dai, 2022, Journal of Manufacturing Systems.

Mechanical anisotropy and deep drawing behaviors of AZ31 magnesium alloy sheets produced by unidirectional and cross rolling

Ying-hong Peng, Dayong Li, Weiqin Tang, 2015 .

Experimental and numerical study of warm deep drawing of AZ31 magnesium alloy sheet

Ying-hong Peng, Xiaoqin Zeng, Dayong Li, 2007 .

Numerical study of inelastic behavior of magnesium alloy sheets during cyclic loading-unloading

Ying-hong Peng, Huamiao Wang, Dayong Li, 2018, Journal of Physics: Conference Series.

Simulation of texture evolution in magnesium alloy: Comparisons of different polycrystal plasticity modeling approaches

Ying-hong Peng, S. Zhang, Dayong Li, 2014 .

Forming limit diagram analysis based on crystal plasticity for magnesium alloy sheets

Ying-hong Peng, S. Zhang, Dayong Li, 2013 .

Effects of Detwinning on the Inelasticity of AZ31B Sheets During Cyclic Loading and Unloading

Ying-hong Peng, Huamiao Wang, Dayong Li, 2018, International Journal of Applied Mechanics.

Elastic-plastic transition: A universal law

H. Bong, Dayong Li, Zhongda Chen, 2016 .

Meso-scale Modeling and Damage Analysis of Carbon/Epoxy Woven Fabric Composite under In-plane Tension and Compression Loadings.

Ying-hong Peng, X. Su, Qingping Sun, 2021, International journal of mechanical sciences.

Numerical simulation of low pressure die casting of magnesium wheel

Yinghong Peng, Dayong Li, Ying-chun Wang, 2007 .

Crystal plasticity finite element modelling of the extrusion texture of a magnesium alloy

Ying-hong Peng, Dayong Li, Weiqin Tang, 2015 .

Fatigue behaviors and mechanism-based life evaluation on SPR-bonded aluminum joint

Ying-hong Peng, W. Lai, X. Su, 2021 .

Stress Analysis on the Single-Lap SPR- Adhesive Hybrid Joint

Ying-hong Peng, X. Su, Dayong Li, 2018 .

Polycrystalline behavior analysis of extruded magnesium alloy AZ31

Ying-hong Peng, S. Zhang, Dayong Li, 2013 .

Optimization of metal-forming process via a hybrid intelligent optimization technique

Yinghong Peng, Jilong Yin, Dayong Li, 2007 .

Simulation of texture evolution during plastic deformation of FCC, BCC and HCP structured crystals with crystal plasticity based finite element method

Ying-hong Peng, S. Zhang, Dayong Li, 2011 .

A new approach in evaluation of thermal contact conductance of tube—fin heat exchanger

Zhaohui Du, Dayong Li, Ding Tang, 2010 .

Experimental Study on the Permeability of Quartz Sandstone under Coupled Thermo-Hydromechanical Loading

Dayong Li, Yun Jia, Yu Zhang, 2021, Lithosphere.

Deep learning assisted vision inspection of resistance spot welds

Ying-hong Peng, Huamiao Wang, Dai Wei, 2021 .

Mechanical Expansion of Thick-Walled Microgroove Tube for High Pressure ACR System

Dayong Li, Ding Tang, Yinghong Peng, 2011 .

Numerical simulation of fluid flow and heat transfer in a plasma spray gun

Jie Hu, Weiming Wang, Yinghong Peng, 2005 .

Research on strip deformation in the cage roll-forming process of ERW round pipes

Yinghong Peng, Dayong Li, Jinmao Jiang, 2009 .

An improved test for shear fracture

J. W. Lee, Dayong Li, Zhongda Chen, 2016 .

A physical simulation of longitudinal seam welding in micro channel tube extrusion

Dayong Li, Ding Tang, Yinghong Peng, 2014 .