I. Hahn

发表

Comparison of soft magnetic composites (SMCs) and electrical steel

A. Boehm, I. Hahn, 2012, 2012 2nd International Electric Drives Production Conference (EDPC).

Calculation of Active Material’s Torque Contributions for a Flux Switching Machine

I. Hahn, H. Kurtović, 2020, IEEE Transactions on Magnetics.

Influence of turning on the magnetic properties of electrical steel in the production of electrical machines

A. Boehm, I. Hahn, 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

A new approach in the production of electrical motors using only machining processes

A. Boehm, I. Hahn, 2011, 2011 1st International Electric Drives Production Conference.

Investigations on the Concept of Short-Circuited Rotor Windings for the Improvement of the Self-Sensing Capability of Electrical Machines

I. Hahn, C. Hittinger, 2019, 2019 26th International Workshop on Electric Drives: Improvement in Efficiency of Electric Drives (IWED).

Comparison of the resistance- and inductance-based saliency of a PMSM due to a short-circuited rotor winding

Ingo Hahn, Johannes Graus, Alexander Rambetius, 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

Simulation of a permanent magnet flux-switching machine with reduced outer stator leakage flux

Ingo Hahn, I. Hahn, A. Lindner, 2014, 2014 International Symposium on Power Electronics, Electrical Drives, Automation and Motion.

Influence of stator saturation on the differential inductances of PM-synchronous machines with concentrated winding

A. Boehm, I. Hahn, J. Graus, 2012, 3rd IEEE International Symposium on Sensorless Control for Electrical Drives (SLED 2012).

Influence of pulse width modulation (PWM) on the iron losses of electrical steel

Ingo Hahn, A. Boehm, I. Hahn, 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

Finite-difference time-domain (FDTD) algorithm for multiblock grids

I. Hahn, Veronika Kraeck, 2014, 2014 International Conference on Electrical Machines (ICEM).

Hybrid Structure Optimization of a PMSM Using Global and Local Methods for Higher Torque and Lower Volume

S. Ruzbehi, I. Hahn, 2022, 2022 11th International Conference on Renewable Energy Research and Application (ICRERA).

Post-processing Topology Optimization of an Electromagnetic Actuator Using a Hybrid Method of Genetic Algorithm and Local Importance Measure (LIM)

Ingo Hahn, Shabnam Ruzbehi, S. Ruzbehi, 2019, 2019 9th International Conference on Power and Energy Systems (ICPES).

Topology Optimization with Improved Genetic Algorithm of an Electromagnetic Actuator

I. Hahn, S. Ruzbehi, S. Ruzbehi, 2019, 2019 22nd International Conference on the Computation of Electromagnetic Fields (COMPUMAG).

Structural Optimization of an Electromagnetic Actuator Based on Genetic Algorithm, Greedy Search and Their Combination

Ingo Hahn, Shabnam Ruzbehi, S. Ruzbehi, 2019, 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE).

Different Iron Loss Models for Electrical Steel Sheets considering Harmonic Flux Signals

Ingo Hahn, Matthias Stiller, I. Hahn, 2019, 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE).

Effect of particle size and size distribution on the permeability of soft magnetic liquid silicone rubber composites

D. Schubert, I. Hahn, S. Werner, 2019, Composites Science and Technology.

Measurement of magnetic properties of steel at high temperatures

Ingo Hahn, Andreas Boehm, A. Boehm, 2014, IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society.

Model based rotor angle fault detection in PM synchronous machines

I. Hahn, H. Peter, I. Hahn, 2012, International Symposium on Power Electronics Power Electronics, Electrical Drives, Automation and Motion.

Model based closed loop control scheme for compensation of harmonic currents in PM-synchronous machines

B Piepenbreier, I Hahn, M Seilmeier, 2010, SPEEDAM 2010.

Heuristic Structural Optimization of the Permanent Magnets Used in a Surface Mounted Permanent-Magnet Synchronous Machine

Ingo Hahn, I. Hahn, 2012, IEEE Transactions on Magnetics.

Numerical modeling for 3D eddy current calculation in magneto-quasistatic approximation

Ingo Hahn, Jaeho Ryu, I. Hahn, 2021, 2021 22nd IEEE International Conference on Industrial Technology (ICIT).

Experimental Verification of a Passively Cooled Large Air-Gap 6/8-Flux-Switching Permanent Magnet Machine Including Manufacturing

Andreas Lindner, Ingo Hahn, I. Hahn, 2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society.

Practical evaluation of a passive stator cooling concept without thermal stacking

Ingo Hahn, Andreas Lindner, I. Hahn, 2017, 2017 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD).

Alternative ways of cooling an e-core flux-switching permanent magnet machine with large air-gap

Andreas Lindner, Ingo Hahn, I. Hahn, 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society.

Analysis of flux focusing double stator and single rotor axial flux permanent magnet motor

Qurban Ali Shah Syed, Ingo Hahn, I. Hahn, 2016, 2016 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES).

Comparative analysis of surface mounted and flux focusing type axial flux permanent magnet motor

S.Q.A. Shah, I. Hahn, I. Hahn, 2016 .

Magnetization Characteristics and Loss Measurements of the Axial Flux Permanent Magnet Motor's Stator

I. Hahn, V. Solovieva, Qurban Ali Shah Syed, 2019, 2019 IEEE International Electric Machines & Drives Conference (IEMDC).

New Single-Phase Flux Switching Axial Flux Permanent Magnet Motor

Qurban Ali Shah Syed, Ingo Hahn, Haris Kurtović, 2017, IEEE Transactions on Magnetics.

Nonlinear Modeling of MGSPMs Based on Hybrid Subdomain and Magnetic Equivalent Circuitry

I. Hahn, B. Dianati, 2022, IEEE transactions on magnetics.

Torque Harmonics Minimization of Double-Stage Magnetic Gear Transmission System

Alfonso Damiano, Alessandro Serpi, Ingo Hahn, 2019, IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society.

Self-Sensing Control of Permanent-Magnet Synchronous Machines With Multiple Saliencies Using Pulse-Voltage-Injection

Lei Chen, Ingo Hahn, Gunther Götting, 2015, IEEE Transactions on Industry Applications.

Influence of elementary model parameter variations on simulated ferromagnetic hysteresis using a ring-shaped 3D dipole collective

I. Hahn, C. Hittinger, J. Wagner, 2017, 2017 20th International Conference on Electrical Machines and Systems (ICEMS).

Examining the unstable behaviour of a phenomenological three dimensional, dipole-based hysteresis model

I. Hahn, C. Hittinger, J. Wagner, 2017, 2017 20th International Conference on Electrical Machines and Systems (ICEMS).

Phenomenological modelling of ferromagnetic hysteresis using three dimensional dipole collectives

I. Hahn, C. Hittinger, J. Wagner, 2016, 2016 XXII International Conference on Electrical Machines (ICEM).

Topology Optimization of a PM Synchronous Machine Based on Novel Metaheuristic Algorithm for Lower Cogging Torque and Magnet Volume

S. Ruzbehi, I. Hahn, 2022, 2022 IEEE International Conference on Industrial Technology (ICIT).

Two-level Topology Optimization of an Electromagnetic Actuator Based on Genetic Algorithm and Neighbourhood Method

Ingo Hahn, Shabnam Ruzbehi, S. Ruzbehi, 2020, 2020 IEEE International Conference on Industrial Technology (ICIT).

Topology optimization of a nonlinear electromagnetic actuator based on a local importance measure

Ingo Hahn, Shabnam Ruzbehi, S. Ruzbehi, 2019, 2019 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD).

A Performance Comparison of GaN FET and Silicon MOSFET

Ingo Hahn, Shima Khoshzaman, I. Hahn, 2021, 2021 22nd IEEE International Conference on Industrial Technology (ICIT).

Modeling single and double stator axial eddy current brakes considering current displacement, magnetic leakage, fringing and saturation using coupled electric and magnetic equivalent circuits

Stefan Meier, Ingo Hahn, I. Hahn, 2014, IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society.