I. Smith

发表

Fracture Modeling of Bolted Connections in Wood and Composites

G. McClure, N. Kharouf, I. Smith, 1999 .

Bridging crack model for fracture of spruce

I. Smith, S. Vasic, 2002 .

Mechanical Properties of Bamboo Through Measurement of Culm Physical Properties for Composite Fabrication of Structural Concrete Reinforcement

D. Hebel, I. Smith, A. Javadian, 2019, Front. Mater..

Fracture and fatigue in wood

Meng Gong, Eric N. Landis, Ian Smith, 2003 .

Effect of load type on failure mechanisms of spruce in compression parallel to grain

M. Gong, I. Smith, 2004, Wood Science and Technology.

The use of bending and shear moduli for predicting bending strength of wood

Y. Chui, I. Smith, 1991 .

Failure of softwood under static compression parallel to grain.

I. Smith, M. Gong, M. Gong, 2000 .

Effect of stress levels on compressive low-cycle fatigue behaviour of softwood

M. Gong, I. Smith, 2005 .

Application of Sustainable Bamboo-Based Composite Reinforcement in Structural-Concrete Beams: Design and Evaluation

D. Hebel, I. Smith, A. Javadian, 2020, Materials.

Vibration responses of glulam beam-and-deck floors

Ian F. C. Smith, Ghasan Doudak, Mohammad Mehdi Ebadi, 2018 .

Explicit Vibration Formulas Applicable to Timber Plates with Free and Simply Supported Edges

I. Smith, Kaveh Arjomandi, Ebenezer Ussher, 2018, Structural Engineering International.

Effect of Waveform and Loading Sequence on Low-Cycle Compressive Fatigue Life of Spruce

M. Gong, I. Smith, 2003 .

Critical reaction forces of glulam members with tension-side notches at end supports1

Ian F. C. Smith, Jan Weckendorf, Henry Meleki Kiwelu, 2015 .

Behaviour of moment connection in timber frameworks

Maurizio Piazza, Ian F. C. Smith, Andrea Polastri, 2013 .

Connection System of Massive Timber Elements Used in Horizontal Slabs of Hybrid Tall Buildings

Ian F. C. Smith, Andi Asiz, A. Asiz, 2011 .

Failure Analysis of Engineering Wood Products

Ian F. C. Smith, Andi Asiz, Monica Snow, 2006 .

Influence of juvenile wood on bending properties of softwood lumber.

I. Smith, C. S. Shivnaraine, I. Smith, 1990 .

Effects of multi-phase moisture conditioning on stiffness of nailed OSB-to-lumber connections

I. Smith, I. Smith, M. A. H. Mohammad, 1996 .

Fracture behaviour of softwood

Ian Smith, Svetlana Vasic, I. Smith, 2003 .

Vibration serviceability performance of timber floors

I. Smith, T. Toratti, T. Tannert, 2016, European Journal of Wood and Wood Products.

Variation in crushing strength and some related properties of a red pine

I. Smith, F. Kaya, 1993 .

Factors influencing bending properties of white spruce lumber

I. Smith, Hui Zhou, 2007 .

FACTORS INFLUENCING BENDING PROPERTIES OF WHITE SPRUCE

I. Smith, Hui Zhou, 2006 .

A method for measuring the embedding characteristics of wood and wood-based materials

I. Smith, L. R. J. Whale, I. Smith, 1989 .

Fracture zone Characterization—Micro-Mechanical Study

E. Landis, I. Smith, S. Vasic, 2007 .

Failure characteristics of engineered wood products connections

I. Smith, 2008 .

Load and Resistance Factor Design of Timber Joints: International Practice and Future Direction

Ian F. C. Smith, Greg Foliente, G. Foliente, 2002 .

Capacities of OSB-Sheathed Light-Frame Shear-Wall Panels with or without Perforations

I. Smith, G. Doudak, I. Smith, 2009 .

Finite element techniques and models for wood fracture mechanics

Eric Landis, Ian Smith, Svetlana Vasic, 2005, Wood Science and Technology.

Influence of fastener size on lateral strength of steel-to-wood screw joints

Ying Hei Chui, Ian Smith, Y. Chui, 2006 .

A review of high R-value wood framed and composite wood wall technologies using advanced insulation techniques

Ian F. C. Smith, Som S Shrestha, Andi Asiz, 2014 .

Failure mechanisms in wood-based materials: A review of discrete, continuum, and hybrid finite-element representations

Andi Asiz, Monica Snow, Svetlana Vasic, 2007 .

Experimentally based q -factor estimation of cross-laminated timber walls

Roberto Scotta, Ian F. C. Smith, Luca Pozza, 2016 .

Elasto-plastic modeling of wood bolted connections

Ghyslaine McClure, N. Kharouf, I. Smith, 2003 .

4124 - THICKNESS EFFECT IN WOOD – STATISTICAL OR STRUCTURAL?

E. Landis, I. Smith, S. Vasic, 2013 .

THICKNESS EFFECT IN WOOD – STATISTICAL OR STRUCTURAL?

E. Landis, I. Smith, Zheng Chen, 2004 .

Comparison of Field and Wind Tunnel Pressure Coefficients for a Light-Frame Industrial Building

Ian F. C. Smith, Ghasan Doudak, Theodore Stathopoulos, 2009 .

Timber: An ancient construction material with a bright future

Monica Snow, I. Smith, Ian F. C. Smith, 2008 .

Experimental Characterization of Monotonic and Cyclic Loading Responses of CLT Panel-To-Foundation Angle Bracket Connections

Roberto Tomasi, Ian F. C. Smith, R. Tomasi, 2015 .

Factors affecting mode I fracture energy of plantation-grown red pine

Ying Hei Chui, Y. Chui, I. Smith, 1994 .

Design of lightweight wooden floors to avoid human discomfort

Ian F. C. Smith, Ying Hei Chui, Y. Chui, 1988 .

Influence of rotatory inertia, shear deformation and support condition on natural frequencies of wooden beams

Ying Hei Chui, Y. Chui, I. Smith, 1990 .

Demands Placed on Steel Frameworks of Tall Buildings Having Reinforced Concrete or Massive Wood Horizontal Slabs

Ian F. C. Smith, Andi Asiz, A. Asiz, 2009 .

4550 - FRACTURE BEHAVIOUR OF MULTIPLE–BOLT ENGINEERED WOOD PRODUCT CONNECTIONS

A. Asiz, I. Smith, M. Snow, 2013 .

Contact-crack problem with friction in spruce

I. Smith, S. Vasic, 2003, Holz als Roh- und Werkstoff.

STRUCTURAL CHARACTERIZATION OF MULTI-STOREY BUILDINGS WITH CLT CORES

R. Scotta, I. Smith, L. Pozza, 2014 .