X. Guo

发表

PEAK LOAD ESTIMATION OF PRE-CRACKED PLAIN CONCRETE BEAMS IN MIXED-MODE FRACTURE

R. Su, B. Young, X. Guo, 2015 .

Investigation of non-local cracking in layered stainless steel with nanostructured interface

Jian Lu, A. Leung, Aiying Chen, 2010 .

Mesh dependence of transverse cracking in laminated metals with nanograined interface layers

Jian Lu, Wei Zhang, X. Guo, 2013 .

The application of the infrared thermography on titanium alloy for studying fatigue behavior

Q. Guo, X. Guo, J. Fan, 2013 .

Biaxial fatigue crack growth in proton exchange membrane of fuel cells based on cyclic cohesive finite element method

Yang Wang, G. Weng, S. Shi, 2021 .

Cylindrical Cavity Expansion Penetration Model for Concrete Targets with Shear Dilatancy

T. He, H. Wen, X. Guo, 2013 .

The saturation state of strength and ductility of bimodal nanostructured metals

G. Weng, X. Guo, Guang Yang, 2016 .

The direct and indirect effects of nanotwin volume fraction on the strength and ductility of coarse-grained metals

G. Weng, Linli Zhu, X. Guo, 2016 .

Simulation of ballistic performance of coarse-grained metals strengthened by nanotwinned regions

G. Yang, G. Weng, X. Guo, 2015 .

Numerical simulation of ballistic performance of bimodal nanostructured metals

G. Weng, Linli Zhu, X. Guo, 2015 .

Micromechanical simulation of fracture behavior of bimodal nanostructured metals

Jian Lu, G. Weng, Linli Zhu, 2014 .

A study of dynamic plasticity in austenite stainless steels with a gradient distribution of nanoscale twins

Jian Lu, Linli Zhu, X. Guo, 2017 .

Microstructures-based constitutive analysis for mechanical properties of gradient-nanostructured 304 stainless steels

Jian Lu, Aiying Chen, Linli Zhu, 2017 .

Analysis of the twin spacing and grain size effects on mechanical properties in hierarchically nanotwinned face-centered cubic metals based on a mechanism-based plasticity model

Jian Lu, S. Qu, Linli Zhu, 2015 .

Simulation of ballistic performance of a two-layered structure of nanostructured metal and ceramic

G. Weng, X. Guo, L. Zhu, 2016 .

Simulation of ductile fracture of zirconium alloys based on triaxiality dependent cohesive zone model

G. Weng, X. Guo, G. Chen, 2021, Acta Mechanica.

3D cohesive modeling of nanostructured metallic alloys with a Weibull random field in torsional fatigue

G. Weng, Tianzhi Yang, X. Guo, 2015 .

Determination of fracture toughness of AZ31 Mg alloy using the cohesive finite element method

Long-Qing Chen, Min Zhou, X. Guo, 2012 .

Ductility enhancement of layered stainless steel with nanograined interface layers

A. Soh, G. Weng, X. Guo, 2012 .

Numerical Investigation of the Bilinear Softening Law in the Cohesive Crack Model for Normal-Strength and High-Strength Concrete

B. Young, X. Guo, R. Su, 2012 .

Effect of hydride precipitation on the fatigue cracking behavior in a zirconium alloy cladding tube

Hao Wu, X. Guo, Y. Xin, 2019 .

Environmentally induced crack propagation behavior of 2219 aluminum: microstructural effects

S. Yannacopoulos, X. Guo, T. P. Kishchuk, 1997 .

Effects of strain rate on the low cycle fatigue behavior of AZ31B magnesium alloy processed by SMAT

X. Guo, Gang Chen, S. L. Wu, 2018 .

Interface effects on the strength and ductility of bimodal nanostructured metals

G. Yang, J. Lu, G. Weng, 2018, Acta Mechanica.

Interface effects on the strength and ductility of bimodal nanostructured metals

Jian Lu, G. Yang, G. Weng, 2018, Acta Mechanica.

Tensile Failure Modes in Nanograined Metals with Nanotwinned Regions

Yongchang Liu, G. Weng, X. Guo, 2018, Metallurgical and Materials Transactions A.

Partitioning of alloying elements during the eutectoid transformation of ductile iron

D. Stefanescu, X. Guo, 1999 .

Simulating Size and Volume Fraction-Dependent Strength and Ductility of Nanotwinned Composite Copper

Linli Zhu, H. Ruan, X. Guo, 2016 .

A Mechanical Properties Model for Ductile Iron

L. Chuzhoy, X. Guo, L. Chuzhoy, 1997 .

Micromechanical modeling for mechanical properties of gradient-nanotwinned metals with a composite microstructure

Linli Zhu, H. Ruan, X. Guo, 2017 .

Surface Stress Effects on the Yield Strength in Nanotwinned Polycrystal Face-Centered-Cubic Metallic Nanowires

Jian Lu, Linli Zhu, X. Guo, 2014 .

Computer simulation of strength and ductility of nanotwin-strengthened coarse-grained metals

J. Lu, G. Weng, X. Guo, 2014 .

Numerical investigation of fracture behavior of nanostructured Cu with bimodal grain size distribution

X. Guo, L. Zhu, J. Lu, 2014 .

Constitutive modeling of size-dependent deformation behavior in nano-dual-phase glass-crystal alloys

Jian Lu, Linli Zhu, H. Ruan, 2020 .

Tuning the strength-ductility synergy of nanograined Cu through nanotwin volume fraction

G. Weng, X. Guo, G. Chai, 2022, Computational Materials Science.

Ballistic Performance of Bimodal Nanostructured and Nanotwin-Strengthened Metals

Jian Lu, G. Weng, Linli Zhu, 2018 .

Strain-rate-dependent cohesive zone modelling of charge damage behavior when a projectile penetrates multilayered targets

G. Weng, F. Shen, X. Guo, 2023, Acta Mechanica.

The limit velocity and limit displacement of nanotwin-strengthened metals under ballistic impact

G. Weng, X. Guo, L. Zhu, 2018 .

Influences of nanotwin volume fraction on the ballistic performance of coarse-grained metals

A. Soh, G. Weng, X. Guo, 2017 .

The limit velocity and limit displacement of nanotwin-strengthened metals under ballistic impact

G. Weng, X. Guo, L. Zhu, 2017, Acta Mechanica.

Numerical investigation of fracture behavior of nanostructured Cu with bimodal grain size distribution

X. Guo, L. Zhu, J. Lu, 2014, Acta Mechanica.

Micromechanical Simulation of Fracture Behavior of Nanostructured Metals with Bimodal Grain Size Distribution

Jian Lu, G. Weng, Linli Zhu, 2014 .

Prediction of mechanical properties in bimodal nanotwinned metals with a composite structure

Jian Lu, Linli Zhu, H. Ruan, 2016 .

Mechanical Analysis and Design Approach of Composite Segment for Shield Tunnel Linings

W. J. Zhang, A. Koizumi, X. Guo, 2014 .

Mechanism for the Pseudoelastic Behavior of FCC Shape Memory Nanowires

X. Guo, W. Liang, M. Zhou, 2009 .

Influence of some metallurgical parameters on stream treated ductile iron

X. Guo, 2003 .

Mechanism for buckling of shield tunnel linings under hydrostatic pressure

W. J. Zhang, Atsushi Koizumi, J. H. Wang, 2015 .

Nanoindentation study of δ-phase zirconium hydride using the crystal plasticity model

G. Weng, X. Guo, G. Chen, 2023, International Journal of Plasticity.

Anisotropic deformation mechanisms of rolling-textured Zircaloy-4 alloy by a crystal plasticity model

G. Weng, X. Guo, G. Chen, 2023, Computational Materials Science.

Local Monte Carlo Method for Fatigue Analysis of Coarse-Grained Metals with a Nanograined Surface Layer

Xi-Qiao Feng, G. Weng, X. Guo, 2018, Metals.