Qi Yang

发表

Light Scattering Studies of Multiphase Polymer Systems

Yajiang Huang, Guangxian Li, X. Liao, 2011 .

Preparation of nanocellular foams from polycarbonate/poly(lactic acid) blend by using supercritical carbon dioxide

Guangxian Li, X. Liao, Qi Yang, 2013, Journal of Polymer Research.

Multivariate correlation analysis of outdoor weathering behavior of polypropylene under diverse climate scenarios

Qi Yang, Guangxian Li, Yadong Lv, 2017 .

Creep lifetime prediction of polypropylene/clay nanocomposites based on a critical failure strain criterion

Yadong Lv, Yajiang Huang, Guangxian Li, 2014 .

The morphological evolution and β-crystal distribution of isotactic polypropylene with the assistance of a long chain branched structure at micro-injection molding condition

Qi Yang, Hongwen Sun, Zhongguo Zhao, 2017, Journal of Polymer Research.

Natural weathering mechanism of isotatic polypropylene under different outdoor climates in China

Yajiang Huang, Guangxian Li, Jian Xiong, 2017 .

Mechanical Properties and Morphologies of Polypropylene With Different Sizes of Glass Bead Particles

Kun Yang, Guangxian Li, Qi Yang, 2008 .

Mechanical properties and morphologies of polypropylene/single-filler or hybrid-filler calcium carbonate composites

Kun Yang, Guangxian Li, Qi Yang, 2007 .

Effects of enhanced compatibility by transesterification on the cell morphology of poly(lactic acid)/ polycarbonate blends using supercritical carbon dioxide

Guangxian Li, Guangjian He, X. Liao, 2015 .

Electrically conductive graphene-filled polymer composites with well organized three-dimensional microstructure

L. Kong, Junlong Yang, Qi Yang, 2014 .

Effect of combined fatigue and chemical aging conditions on the mechanical property, structure, and morphology of styrene–butadiene–styrene elastomer

Guangxian Li, X. Liao, Qi Yang, 2015 .

Effect of physical and chemical crosslinking structure on fatigue behavior of styrene butadiene elastomer

Guangxian Li, X. Liao, Qi Yang, 2014 .

Crystals in Situ Induced by Supercritical CO2 as Bubble Nucleation Sites on Spherulitic PLLA Foam Structure Controlling

Guangxian Li, X. Liao, Qi Yang, 2017 .

Disclosing the crystallization behavior and morphology of poly(ϵ‐caprolactone) within poly(ϵ‐caprolactone)/poly(l‐lactide) blends

Guangxian Li, X. Liao, Qi Yang, 2018 .

Crystallization and morphological transition of poly(L-lactide)–poly(ε-caprolactone) diblock copolymers with different block length ratios

Guangxian Li, X. Liao, Qi Yang, 2017 .

Effect of Unexpected CO2’s Phase Transition on the High-Pressure Differential Scanning Calorimetry Performance of Various Polymers

Chul B. Park, Guangxian Li, X. Liao, 2016 .

Morphology and crystallization behavior of PCL/SAN blends containing nanosilica with different surface properties

Yajiang Huang, Dahang Tang, X. Liao, 2016 .

Formation and stability of flow-induced nucleation precursors in PCL in the presence of a rigid miscible component

Yajiang Huang, Guangxian Li, Qi Yang, 2015 .

Controlling the Orientation of Droplets in Ellipsoid-Filled Polymeric Emulsions with Particle Parameters and Flow Conditions.

Y. Wang, Yajiang Huang, Guangxian Li, 2017, Langmuir : the ACS journal of surfaces and colloids.

Pickering emulsions stabilized by shape-controlled silica microrods

Yajiang Huang, Guangxian Li, Qi Yang, 2016 .

The morphology of immiscible PDMS/PIB blends filled with silica nanoparticles under shear flow

Yajiang Huang, Guangxian Li, Xiaolian Chen, 2010 .

Retarded stress and morphology relaxation of deformed polymer blends in the presence of a triblock copolymer

Yajiang Huang, Guangxian Li, Xueyan Zhao, 2014 .

Polydopamine particles as a β-nucleating agent and antioxidant for isotactic polypropylene

Qiang Liu, Shixiang Liu, Yajiang Huang, 2019, Chemical Engineering Journal.

Study on the creep behavior of polypropylene

Xiaojun Wang, Yajiang Huang, Guangxian Li, 2009 .

Strategy to Enhance Conductivity of Polystyrene/Graphene Composite Foams via Supercritical Carbon Dioxide Foaming Process

Guangxian Li, Qiuyue Jiang, X. Liao, 2018, The Journal of Supercritical Fluids.

Contribution of oriented structure and rigid nanofillers to mechanical enhancement of die-drawn PP/MWCNT composites

Qi Yang, Pingping Wu, Xiehuai Luo, 2020 .

Effects of ionic liquids and thermal annealing on the rheological behavior and electrical properties of poly(methyl methacrylate)/carbon nanotubes composites

Guangxian Li, Qi Yang, Pengjian Gong, 2018, Polymer.

Effect of Compatibilizer Content on the Shear and Extensional Rheology of Polypropylene/Clay Nanocomposites

Yadong Lv, Yajiang Huang, Qi Yang, 2012 .

The molecular structure characteristics of long chain branched polypropylene and its effects on non-isothermal crystallization and mechanical properties

Yajiang Huang, X. Liao, Qi Yang, 2013 .

Stress relaxation behavior of co-continuous PS/PMMA blends after step shear strain

Yadong Lv, Yajiang Huang, Guangxian Li, 2013, Rheologica Acta.

The synergistic mechanism of thermally reduced graphene oxide and antioxidant in improving the thermo-oxidative stability of polypropylene

Yadong Lv, Yajiang Huang, Guangxian Li, 2015 .

Synergistic effect of multiwalled carbon nanotubes and carbon black on rheological behaviors and electrical conductivity of hybrid polypropylene nanocomposites

Yian Chen, Yajiang Huang, X. Liao, 2018 .

Rheological behaviors and electrical conductivity of long-chain branched polypropylene/carbon black composites with different methods

Yian Chen, Yadong Lv, Yajiang Huang, 2015, Journal of Polymer Research.

Preparation of near-spherical PA12 particles for selective laser sintering via Plateau-Rayleigh instability of molten fibers

Yajiang Huang, Guangxian Li, Qi Yang, 2020 .

Thermal oxidative and ozone oxidative stabilization effect of hybridized functional graphene oxide in a silica-filled solution styrene butadiene elastomer.

Yajiang Huang, X. Liao, Qi Yang, 2016, Physical chemistry chemical physics : PCCP.

Fabrication of conductive elastic nanocomposites via framing intact interconnected graphene networks

L. Kong, P. Zhao, Zheng Peng, 2014 .

The intrinsic thermal-oxidative stabilization effect of chemically reduced graphene oxide on polypropylene

Yadong Lv, Yajiang Huang, Guangxian Li, 2013 .

Influence of Surfactant Functional Groups on Morphology and Rheology of Polypropylene/Organoclay Nanocomposites

Yadong Lv, Yajiang Huang, Qiong Zeng, 2015 .

Dispersion and rheology of polypropylene/organoclay nanocomposites: effect of cation exchange capacity and number of alkyl tails

Yadong Lv, Yajiang Huang, Qiong Zeng, 2012, Journal of Materials Science.

Effects of Process Temperatures on the Flow-Induced Crystallization of Isotactic Polypropylene/Poly(ethylene terephthalate) Blends in Microinjection Molding

Yajiang Huang, X. Liao, Qi Yang, 2017 .

Effective in situ polyamide 6 microfibrils in isotactic polypropylene under microinjection molding: significant improvement of mechanical performance

Yajiang Huang, X. Liao, Qi Yang, 2016, Journal of Materials Science.

New understanding of the hierarchical distribution of isotactic polypropylene blends formed by microinjection-molded poly(ethylene terephthalate) and β-nucleating agent

Yajiang Huang, X. Liao, Qi Yang, 2015 .

In-situ polymerization of eco-friendly waterborne polyurethane/polydopamine-coated graphene oxide composites towards enhanced mechanical properties and UV resistance

Yadong Lv, Yajiang Huang, Guangxian Li, 2022, Journal of Cleaner Production.

Thermal Behavior of Polyamide‐12 and Poly (Styrene‐Co‐Acrylonitrile) Blend

Yajiang Huang, Guangxian Li, Qi Yang, 2006 .

STUDY ON THE PHASE SEPARATION KINETICS OF PS/PVME BLENDS UNDER OSCILLATORY SHEAR——THE TIME DEPENDENCE AND STRESS RESPONSE OF PHASE SEPARATION: STUDY ON THE PHASE SEPARATION KINETICS OF PS/PVME BLENDS UNDER OSCILLATORY SHEAR——THE TIME DEPENDENCE AND STRESS RESPONSE OF PHASE SEPARATION

Guangxian Li, Qi Yang, Yong-yue Luo, 2006 .

Mechanism of Microstructural Change of High-Density Polyethylene Under Different Outdoor Climates in China

Yajiang Huang, Guangxian Li, Jian Xiong, 2020, Journal of Polymers and the Environment.

CNTs/ UHMWPE composites with a two-dimensional conductive network

Jie-feng Gao, Zhong‐Ming Li, Qi Yang, 2008 .

Effect of confinement on glass dynamics and free volume in immiscible polystyrene/high-density polyethylene blends

Lingyu Wu, Guangxian Li, X. Liao, 2015 .

Microstructure studies of isotactic polypropylene under natural weathering by positron annihilation lifetime spectroscopy

Lingyu Wu, Yadong Lv, Yajiang Huang, 2015, Journal of Polymer Research.

Formation and stability of string phase in polyamide 6/polystyrene blends in confined flow: Effects of nanoparticles and blend ratio

Yadong Lv, Yajiang Huang, Guangxian Li, 2016 .

Crystallization and Microstructure Evolution of Microinjection Molded Isotactic Polypropylene with the Assistance of Poly(Ethylene Terephthalate)

T. Ai, Qi Yang, Zhongguo Zhao, 2020, Polymers.

Microstructure of Rod-Based Capillary Suspensions with Different Rod Aspect Ratios under Quiescent and Shear Flow

Yajiang Huang, Guangxian Li, Qi Yang, 2019, Industrial & Engineering Chemistry Research.

Retarded relaxation and breakup of deformed PA6 droplets filled with nanosilica in PS matrix during annealing

Yajiang Huang, Guangxian Li, Qi Yang, 2011 .

The effects of molecular weight and supercritical CO2 on the phase morphology of organic solvent free porous scaffolds

Guangxian Li, X. Liao, Qi Yang, 2018, The Journal of Supercritical Fluids.

An investigation of post treatment on properties and structure of ultrahigh molecular weight polyethylene parts prepared by selective laser sintering for biomedical application

Yajiang Huang, Qi Yang, Haoyu Ma, 2020 .

Laser sintering of cryogenically ground polymer powders into high-performance parts: The role of dry particle coating with a conductive flow agent

Yajiang Huang, Guangxian Li, Qi Yang, 2020 .

Double emulsions of immiscible polymer blends stabilized by interfacially active nanoparticles

Yajiang Huang, Guangxian Li, Qi Yang, 2013 .

Poly(methyl methacrylate) Nanocomposites Based on Graphene Oxide: A Comparative Investigation of the Effects of Surface Chemistry on the Property and Foaming Behavior

Guangxian Li, X. Liao, Qi Yang, 2016 .

MELT COMPATIBILITY OF METALLOCENE LINEAR LOW-DENSITY POLYETHYLENE AND HIGH-DENSITY POLYETHYLENE BLENDS: MELT COMPATIBILITY OF METALLOCENE LINEAR LOW-DENSITY POLYETHYLENE AND HIGH-DENSITY POLYETHYLENE BLENDS

Yajiang Huang, Guangxian Li, Qi Yang, 2010 .

Effect of in situ poly(ethylene terephthalate) (PET) microfibrils on the morphological structure and crystallization behavior of isotactic polypropylene (iPP) under an intensive shear rate

Yajiang Huang, Dahang Tang, X. Liao, 2015 .

Microcellular nanocomposites based on millable polyurethane and nano silica by two-step curing and solid-state supercritical CO2 foaming: Preparation, high-pressure viscoelasticity and mechanical properties

Guangxian Li, Q. Ran, X. Liao, 2017 .

Nanocellular and needle-like structures in poly(l-lactic acid) using spherulite templates and supercritical carbon dioxide

Guangxian Li, X. Liao, Qi Yang, 2015 .

Realizing simultaneous toughening and reinforcement in polypropylene blends via solid die-drawing

Yajiang Huang, X. Liao, Qi Yang, 2019, Polymer.

Creep-resistant behavior of beta-polypropylene with different crystalline morphologies

Guangxian Li, X. Liao, Qi Yang, 2016 .

The Effect of Processing Parameters on the Crystalline, Orientation, and Mechanical Properties of Two‐Stage Die‐Drawn Polypropylene

Qi Yang, Pingping Wu, Xiehuai Luo, 2019, Polymer Engineering & Science.

Confined crystallization morphology of poly(ϵ‐caprolactone) block within poly(ϵ‐caprolactone)–poly(l‐lactide) copolymers

Guangxian Li, X. Liao, Qi Yang, 2019, Polymer International.

Ring-banded spherulites of six-arm star-shaped poly(ε-caprolactone) with different arm length via CO2

Guangxian Li, X. Liao, Qi Yang, 2015, Colloid and Polymer Science.

Concentric ring-banded spherulites of six-arm star-shaped poly(ε-caprolactone) via subcritical CO2

Sui-lin Liu, Guangxian Li, X. Liao, 2014 .

Studies on Mechanical Properties and Structure of LLDPE/Nano-Montmorillonite Composites

Qi Yang, X. Mo, Y. Zhu, 2012 .

Carbon nanotube-reinforced silicone rubber nanocomposites and the foaming behavior in supercritical carbon dioxide

Guangxian Li, X. Liao, Qi Yang, 2018, The Journal of Supercritical Fluids.

Control of the cell structure of microcellular silicone rubber/nanographite foam for enhanced mechanical performance

Guangxian Li, X. Liao, Qi Yang, 2017 .

Phase behavior of near-critical PVME/SAN blend in film

Kun Yang, Guangxian Li, Qi Yang, 2006 .

Ultra-Fast Degradable PBAT/PBS Foams of High Performance in Compression and Thermal Insulation made from Environment-Friendly Supercritical Foaming

Weimiao Wang, Guangxian Li, Qi Yang, 2021, The Journal of Supercritical Fluids.

Morphology and mechanical properties of polypropylene/calcium carbonate nanocomposites

Kun Yang, Guangxian Li, Qi Yang, 2006 .

Mechanical properties and morphologies of polypropylene with different sizes of calcium carbonate particles

Kun Yang, Guangxian Li, Qi Yang, 2006 .

Fully biodegradable polylactide foams with ultrahigh expansion ratio and heat resistance for green packaging.

Yadong Lv, Yajiang Huang, Guangxian Li, 2021, International journal of biological macromolecules.

Preparation of alumina-coated graphite for thermally conductive and electrically insulating epoxy composites

Y. Liu, Yajiang Huang, Dahang Tang, 2015 .

Deep insight into interaction mechanisms between ESBR and silica modified by different silane coupling agents

Yadong Lv, Yajiang Huang, Guangxian Li, 2020 .

Flexible thermoplastic polyurethane/reduced graphene oxide composite foams for electromagnetic interference shielding with high absorption characteristic

Guangxian Li, Qiuyue Jiang, X. Liao, 2019, Composites Part A: Applied Science and Manufacturing.

Microcellular foams simultaneous reinforcing and toughening strategy of combining nano-fibrillation network and supercritical solid-state foaming

Guangxian Li, Bing-Song Lan, Qi Yang, 2022, Polymer.

A novel route to the generation of porous scaffold based on the phase morphology control of co-continuous poly(ε-caprolactone)/polylactide blend in supercritical CO2

Guangxian Li, X. Liao, Qi Yang, 2017 .

Vorticity-Aligned Droplet Bands in Sheared Immiscible Polymer Blends Induced by Solid Particles.

Yajiang Huang, Guangxian Li, Qi Yang, 2020, Langmuir : the ACS journal of surfaces and colloids.

Nonisothermal and isothermal crystallization behavior of isotactic polypropylene/chemically reduced graphene nanocomposites

Yajiang Huang, Junlong Yang, Dahang Tang, 2017 .

Preparation and properties of epoxy/BN highly thermal conductive composites reinforced with SiC whisker

Yajiang Huang, Dahang Tang, X. Liao, 2016 .

Hydrogen bonding and topological network effects on optimizing thermoplastic polyurethane/organic montmorillonite nanocomposite foam

Qi Yang, Pengjian Gong, Bin Lan, 2020 .

The distinctive nucleation of polystyrene composites with differently shaped carbon-based nanoparticles as nucleating agent in the supercritical CO2 foaming process

Guangxian Li, Jian Xiong, X. Liao, 2018, Polymer International.

Introduction of a long-chain branching structure by ultraviolet-induced reactive extrusion to improve cell morphology and processing properties of polylactide foam

Chul B. Park, Guangxian Li, X. Liao, 2017 .

Structural changes and crystallization kinetics of polylactide under CO2 investigated using high‐pressure Fourier transform infrared spectroscopy

Guangxian Li, X. Liao, Qi Yang, 2015 .

Toward simultaneous toughening and reinforcing of trifunctional epoxies by low loading flexible reactive triblock copolymers

Yajiang Huang, Guangxian Li, Qi Yang, 2018, RSC advances.

Synthesis of poly(hydroxyethyl methacrylate)‐b‐poly(propylene glycol)‐b‐poly(hydroxyethyl methacrylate) reactive block copolymer with controlled reactivity for toughening multifunctional epoxy resin

Yadong Lv, Yajiang Huang, Guangxian Li, 2022, Journal of Applied Polymer Science.

Investigation of chemi-crystallization and free volume changes of high-density polyethylene weathered in a subtropical humid zone

Yajiang Huang, Guangxian Li, Jian Xiong, 2016 .

Morphology and rheology of poly(l-lactide)/polystyrene blends filled with silica nanoparticles

Yajiang Huang, Qi Yang, Miqiu Kong, 2012, Journal of Materials Science.

Unusual hierarchical structures of micro-injection molded isotactic polypropylene in presence of an in situ microfibrillar network and a β-nucleating agent

Yajiang Huang, Dahang Tang, X. Liao, 2015 .

Hierarchical microstructure changes and the molecular mechanism of polypropylene under a critical failure strain during creep

Lingyu Wu, X. Liao, Qi Yang, 2015 .

The rheological property and foam morphology of linear polypropylene and long chain branching polypropylene

Yajiang Huang, X. Liao, Qi Yang, 2013, Journal of Wuhan University of Technology-Mater. Sci. Ed..

Effect of Polydispersity on the Phase Behavior of Polystyrene (PS)/Poly (Vinyl Methyl Ether) (PVME)

Liping Li, Yajiang Huang, Qi Yang, 2011 .

Entropy reduction phenomenon in the non-equilibrium state of freeze-dried polymethyl methacrylate samples

Yajiang Huang, Qi Yang, Qiongwen Zhang, 2014, Journal of Polymer Research.

Large‐Scale Fluctuation Behavior Prior to the Crystallization of Poly(ethylene terephthalate) Glass: A Small‐Angle Light Scattering Study

Yajiang Huang, Qi Yang, Y. Mao, 2005 .

Preparation and Properties of Fragrant Acrylonitrile-Butadiene-Styrene Composites

Qi Yang, Xiaolin Liu, Zhiqiang Jiang, 2009 .

Preparation and Properties of a Fragrant Acrylonitrile–Butadiene–Styrene/Polycarbonate Alloy

Yajiang Huang, Qi Yang, Xiaolin Liu, 2009 .

Suppression of wetting-induced percolation-to-droplet transition in near-critical polymer blend films by nanoparticles.

Yajiang Huang, Qi Yang, Miqiu Kong, 2016, Soft matter.

Study on the UCST behavior of polystyrene/poly(styrene-co-acrylonitrile) blend

C. Lei, Yajiang Huang, Qi Yang, 2004 .

The Shear‐Dependent Phase Separation Behavior of the Ternary Blend Polystyrene/Polyvinyl Methyl Ether/Styrene–Acrylonitrile Copolymer

C. Lei, Qi Yang, Dahua Chen, 2006 .

Phase behavior of blends of poly (vinyl methyl ether) with styrene-acrylonitrile in film

Kun Yang, Qi Yang, Y. Mao, 2005 .

Dynamic self generation of hydrogen bonding and relaxation of polymer chain segment in stabilizing thermoplastic polyurethane microcellular foams

Qi Yang, Pengjian Gong, Bin Lan, 2020 .

Structure evolution and orientation mechanism of isotactic polypropylene during the two‐stage solid die drawing process

Yajiang Huang, X. Liao, Qi Yang, 2018 .

A Green and Structure-Controlled Approach to the Generation of Silicone Rubber Foams by Means of Carbon Dioxide

Chuanjian Zhou, X. Liao, Qi Yang, 2016 .

Ultrahigh performance polylactide achieved by the design of molecular structure

Yadong Lv, Yajiang Huang, Qi Yang, 2021 .

High performance branched poly(lactide) induced by reactive extrusion with low-content cyclic organic peroxide and multifunctional acrylate coagents

Yadong Lv, Yajiang Huang, Qi Yang, 2020 .

Effect of blending sequence on the morphology and properties of polyamide 6/EPDM‐g‐MA/epoxy blends

Liping Li, Yajiang Huang, Qi Wang, 2011 .

Effective enhancement of the creep resistance in isotactic polypropylene by elevated concentrations of DMDBS

X. Liao, Qi Yang, Jingjun Zhu, 2016 .

Droplet coalescence and clustering behavior in microsphere-filled polymeric emulsions under shear flow: the key role of asymmetric interfacial affinities.

Yajiang Huang, Qi Yang, Miqiu Kong, 2016, Physical chemistry chemical physics : PCCP.

Flow-induced morphological instability in nanosilica-filled polyamide 6/polystyrene blends

Shihu Wang, Yadong Lv, Yajiang Huang, 2014 .

Development of fibrillar morphology in immiscible PP/PS blends under shear flow

Yajiang Huang, Yusong He, Qi Yang, 2011 .

Controlling the Transition of Long- and Short-Chain Branching Polypropylene

Qi Yang, Wangyang Zhao, Guo-chuang Wu, 2012 .

Structure and Property of Microinjection Molded Poly(lactic acid) with High Degree of Long Chain Branching

B. Whiteside, A. Kelly, Yajiang Huang, 2018, Industrial & Engineering Chemistry Research.

The dependence time of melting behavior on rheological aspects of disentangled polymer melt: a route to the heterogeneous melt

Yajiang Huang, X. Liao, Qi Yang, 2015, Journal of Polymer Research.

Role of dicumyl peroxide on the morphology and mechanical performance of polypropylene random copolymer in microinjection molding

Yajiang Huang, X. Liao, Qi Yang, 2018 .

Flow-induced β-crystal of iPP in microinjection molding: effects of addition of UHMWPE and the processing parameters

Yajiang Huang, X. Liao, Qi Yang, 2016, Journal of Polymer Research.

The Molecular Mechanism of the Morphology Change in PS/PVME/Silica Blends Based on Rheology

Yadong Lv, Yajiang Huang, Qi Yang, 2013 .

Influence of phase coarsening and filler agglomeration on electrical and rheological properties of MWNTs-filled PP/PMMA composites under annealing

Yian Chen, Yajiang Huang, X. Liao, 2015 .

Fabrication of reinforced and toughened poly(lactic acid)/poly(butylene adipate‐ co ‐terephthalate) composites through solid die drawing process

Qi Yang, Pingping Wu, Tongying Zhang, 2020, Journal of Applied Polymer Science.

Effect of Curing System on Morphological, Rheological, Thermal and Mechanical Properties of Thermoplastic Vulcanizates Based on Epoxidized Natural Rubber and Polypropylene

Rui Wang, Qi Yang, M. Huang, 2012 .

Elongation thinning and morphology deformation of nanoparticle-filled polypropylene/polystyrene blends in elongational flow

R. Larson, Yadong Lv, Yajiang Huang, 2018 .

Investigation on the effect of supported synergistic catalyst with intumescent flame retardant in polypropylene

Qi Yang, Hongmei Peng, 2021 .

Synthesis and characterization of a novel charring agent and its application in intumescent flame retardant polypropylene system

X. Liao, Qi Yang, Jian-qian Huang, 2012 .

Hybrid nanoparticles with different surface chemistries show higher efficiency in compatibilizing immiscible polymer blends

Yadong Lv, Yajiang Huang, Qi Yang, 2014 .

Fractionated crystallization and morphology of PP/PS blends in the presence of silica nanoparticles with different surface chemistries

Yadong Lv, Yajiang Huang, Qi Yang, 2013, Colloid and Polymer Science.

Coupling effects of toughening modification and solid die-drawing process on the morphology and mechanical properties of PP/TMB-5 composites with POE

Qi Yang, Pingping Wu, Xiehuai Luo, 2021, Journal of Polymer Research.

Compatibilization of PMMA/PC Blends with Different Strategies: Transesterification Catalyst versus Nanoparticles

Yajiang Huang, Qi Yang, Shuting Xi, 2014 .

Assessment of compatibilization efficiency of SEBS in the PP/PS blend

Yajiang Huang, Xueyan Zhao, Qi Yang, 2018 .

Revealing Molecular Mechanisms of Colorless Transparent Polyimide Films under Photo-Oxidation

Yadong Lv, Yajiang Huang, Qi Yang, 2023, Polymer Degradation and Stability.

Property Evolution and Molecular mechanisms of Aluminized Colorless Transparent Polyimide under Space Ultraviolet Irradiation

Yadong Lv, Yajiang Huang, Qi Yang, 2022, Polymer Degradation and Stability.

Effect of roughness-regulated migration and distribution of particles on the structural evolution of flowing polymer blends

Yajiang Huang, Qi Yang, Miqiu Kong, 2020 .

Unusual Phase Separation Kinetics in Poly(Methyl Methacrylate)/Poly(Styrene-co-Acrylonitrile) (PMMA/SAN) Blends with PMMA of Different Molecular Weights

Yajiang Huang, Qi Yang, T. Xia, 2015 .

Simulation on the phase behavior of binary blends contacted with external surfaces under two-step quench conditions

Yajiang Huang, Qi Yang, Rui Wang, 2008 .

Tuning the Physicochemical Structure of Graphene Oxide by Thermal Reduction Temperature for Improved Stabilization Ability toward Polymer Degradation

Qiang Liu, Shixiang Liu, Yajiang Huang, 2020 .

Influence of composition of carbonyl iron particles on dynamic mechanical properties of magnetorheological elastomers

Fu Jie, Miao Yu, Qi Yang, 2012 .

Improved shape stability of nanosilica-filled PBT fibrils in PS matrix: Effects of accelerated crystallization and enhanced viscoelasticity

Yajiang Huang, Qi Yang, Guang-xian Li, 2012 .

Morphological hysteresis in immiscible PIB/PDMS blends filled with fumed silica nanoparticles

Yajiang Huang, Yusong He, Qi Yang, 2012, Colloid and Polymer Science.

Mechanical Properties, Rheology, and Crystallization of Epoxy-Resin-Compatibilized Polyamide 6/Polycarbonate Blends: Effect of Mixing Sequences

Liping Li, Qi Wang, Qi Yang, 2012 .

New insight into the flocculation behavior of hydrophilic silica in styrene butadiene rubber composites

Yajiang Huang, Dahang Tang, X. Liao, 2015 .

Nonisothermal crystallization behavior of LLDPE/glass fiber composite

Qi Yang, Yuxin Liu, Guang-xian Li, 2008 .

Synthesis of poly(ionic liquid) for trifunctional epoxy resin with simultaneously enhancing the toughness, thermal and dielectric performances

Yadong Lv, Yajiang Huang, Bing Yin, 2020, RSC advances.

Organic solvent free preparation of porous scaffolds based on the phase morphology control using supercritical CO2

X. Liao, Qi Yang, Shaojie Li, 2019, The Journal of Supercritical Fluids.

Effect of nanoparticles on the morphology and properties of PET/PP in situ microfibrillar reinforced composites

Y. Liu, Yajiang Huang, Dahang Tang, 2017 .

Influence of Surface-functionalized Graphene Oxide on the Cell Morphology of Poly(methyl methacrylate) Composite

X. Liao, Qi Yang, Yuwei Wang, 2015 .