Jinjin Zhang

发表

Digital light processing-stereolithography three-dimensional printing of yttria-stabilized zirconia

Shaomin Liu, Xiuxia Meng, Fangyong Yu, 2020 .

A novel fabrication of yttria-stabilized-zirconia dense electrolyte for solid oxide fuel cells by 3D printing technique

Shaomin Liu, Weimin Zhang, Xiuxia Meng, 2019, International Journal of Hydrogen Energy.

A novel Boudouard reaction catalyst derived from strontium slag for enhanced performance of direct carbon solid oxide fuel cells

Fangyong Yu, Naitao Yang, Jinjin Zhang, 2021, Journal of Alloys and Compounds.

Performance improvement of a direct carbon solid oxide fuel cell via strontium-catalyzed carbon gasification

Haibin Sun, Yujiao Xie, Fangyong Yu, 2020 .

Effects of Fly Ash Content on the Strength Development of Soft Clay Stabilized by One-Part Geopolymer under Curing Stress

Jun Wu, Jinjin Zhang, Yi Min, 2021 .

Highly efficient utilization of industrial barium slag for carbon gasification in direct carbon solid oxide fuel cells

Yujiao Xie, Fangyong Yu, Naitao Yang, 2021, International Journal of Hydrogen Energy.

A Microtubular Direct Carbon Solid Oxide Fuel Cell Operated on the Biochar Derived from Pepper Straw

Weimin Zhang, Yujiao Xie, Xiuxia Meng, 2020, Energy Technology.

Experimental and numerical study of micro-tubular direct carbon solid oxide fuel cell fueled by the oilseed rape straw-derived biochar

J. Sunarso, Lin Li, Yujiao Xie, 2023, Chemical Engineering Journal.

A high-performance direct carbon solid oxide fuel cell powered by barium-based catalyst-loaded biochar derived from sunflower seed shell

Yuehua Wu, Yujiao Xie, Xiuxia Meng, 2022, International Journal of Hydrogen Energy.

A new and simple way to prepare monolithic solid oxide fuel cell stack by stereolithography 3D printing technology using 8 mol% yttria stabilized zirconia photocurable slurry

J. Sunarso, Xiuxia Meng, Fangyong Yu, 2022, Journal of the European Ceramic Society.

Enhanced electrochemical performance by structural design of electrolyte surface combining 3D printing technology with multi-physical modelling

J. Sunarso, Xiuxia Meng, Fangyong Yu, 2023, Chemical Engineering Journal.

Integrated micro-tubular SOFC stack supported by a monolithic porous zirconia prepared using 3D printing technology

J. Sunarso, Xiuxia Meng, Jinjin Zhang, 2024, Journal of the European Ceramic Society.

Facile preparation of patterned anode substrate for solid oxide fuel cells by direct-writing 3D printing technology

J. Sunarso, Xiuxia Meng, Fangyong Yu, 2023, Ceramics International.