Qiangguo Jiang

发表

Research into the mechanical properties, sintering mechanism and microstructure evolution of Al2O3-ZrO2 composites fabricated by a stereolithography-based 3D printing method

Haidong Wu, Wei Liu, X. Ji, 2018 .

Fabrication of dense zirconia-toughened alumina ceramics through a stereolithography-based additive manufacturing

Haidong Wu, Wei Liu, Yong Chen, 2017 .

Influences of gallium substitution on the phase stability, mechanical strength and cellular response of β-tricalcium phosphate bioceramics

F. Zuo, Xinying Deng, Qiangguo Jiang, 2020 .

Digital light processing 3D printing of surface-oxidized Si3N4 coated by silane coupling agent

Shanghua Wu, Ping Yang, Qiangguo Jiang, 2022, Journal of Asian Ceramic Societies.

Fabrication of fine-grained α/β Si3N4 by Hot Pressing Flowing Sintering at 1550 °C

Haidong Wu, Qiangguo Jiang, Wei‐Ming Guo, 2019, Ceramics International.

Piezoelectric array for transducer application using additive manufacturing

K. Shung, Qifa Zhou, Xuan Song, 2017, 2017 IEEE International Ultrasonics Symposium (IUS).

A Novel Hot Pressing Flowing Sintering for Preparation of Texturing Ceramics

Weiming Guo, Shanghua Wu, Qiangguo Jiang, 2015 .

Fabrication of complex shaped ceramic parts with surface-oxidized Si3N4 powder via digital light processing based stereolithography method

Haidong Wu, Qiangguo Jiang, Yanhui Li, 2019, Ceramics International.

Three-Dimensional Printed Piezoelectric Array for Improving Acoustic Field and Spatial Resolution in Medical Ultrasonic Imaging

K. Shung, Qifa Zhou, Yang Yang, 2019, Micromachines.

Fabrication of Complex-shaped Zirconia Ceramic Parts via a DLP- Stereolithography-based 3D printing method

Haidong Wu, Wei Liu, X. Ji, 2018 .

Fabrication of high-performance Al2O3-ZrO2 composite by a novel approach that integrates stereolithography-based 3D printing and liquid precursor infiltration

Haidong Wu, X. Ji, Shanghua Wu, 2018 .

Effect of nitrogen pressure on preparation of β-Si3N4 whiskers

Xiuan Xi, Weiming Guo, Qiangguo Jiang, 2017 .

Densification and Thermal Stability of Hot‐Pressed Si3N4–ZrB2 Ceramics

Weiming Guo, Shanghua Wu, Qiangguo Jiang, 2015 .

Preparation and properties of TiAlN coatings on silicon nitride ceramic cutting tools

Haidong Wu, Wei Liu, Shanghua Wu, 2018 .

Effects of Y2O3 on the densification and fracture toughness of SPS-sintered TiC

Haidong Wu, Shanghua Wu, Qiangguo Jiang, 2018 .

Influence of Powder Characteristics on Hot-pressed Si3N4 Ceramics

Weiming Guo, Shanghua Wu, Qiangguo Jiang, 2017 .

Fabrication of fine-grained alumina ceramics by a novel process integrating stereolithography and liquid precursor infiltration processing

Ziwei Wu, Xuan Song, Wei Liu, 2016 .

Strong and Tough Glass with Self‐Dispersed Nanoparticles via Solidification

C. Cao, Xiaochun Li, Shanghua Wu, 2019, Advanced materials.