E. Corona

发表

A review of macroscopic ductile failure criteria.

S. Report, E. Corona, B. Reedlunn, 2013 .

Ratcheting in cyclic plasticity, part II: Multiaxial behavior

S. Kyriakides, T. Hassan, E. Corona, 1992 .

Ductile Tearing of Thin Aluminum Plates Under Blast Loading. Predictions with Fully Coupled Models and Biaxial Material Response Characterization

A. Gullerud, P. Reu, E. Corona, 2015 .

Buckling of T-beams under cyclic bending

E. Corona, M. S. Ellison, 1998 .

A Simple Analysis for Bend‐Stretch Forming of Aluminum Extrusions

E. Corona, 2004 .

Mechanics of Offshore Pipelines

Stelios Kyriakides, Edmundo Corona, S. Kyriakides, 2007 .

Wall Curl in Bending of Laminated Steel

J. Mason, E. Corona, T. Eisenhour, 2004 .

Inelastic Response Under Combined Bending and Tension

S. Kyriakides, E. Corona, 2007 .

Elements of Plasticity Theory

S. Kyriakides, E. Corona, 2007 .

Buckling Mode Localization in Restrained Columns Under Cyclic Loading

E. Corona, 2005 .

Stability of the Shanley Column Under Cyclic Loading

E. Corona, 2001 .

PLASTIC BUCKLING OF T·BEAMS UNDER PURE BENDING

E. Corona, M. S. Ellison, 1997 .

The second Sandia Fracture Challenge: predictions of ductile failure under quasi-static and moderate-rate dynamic loading

J.-L. Chaboche, K. Ravi-Chandar, S. Feld-Payet, 2016, International Journal of Fracture.

Calculations of Buckle-Driven Delamination Using Cohesive Elements

E. Corona, E. Reedy, E. D. Reedy, 2011 .

Wiping die bending of laminated steel

E. Corona, T. Eisenhour, 2007 .

Analysis of peristaltic two-phase flow with application to ureteral biomechanics

M. Sen, E. Corona, J. Jimenez-Lozano, 2011 .

Effects of anisotropy on material hardening and burst in the bulge test

S. Kyriakides, E. Corona, Kelin Chen, 2016 .

The impact of heterogeneous microstructural features on crystal plasticity modeling of plastic anisotropy

S. Kramer, Hojun Lim, F. Pourboghrat, 2021, Modelling and Simulation in Materials Science and Engineering.

Buckling of steel bars with Lüders bands

John A. Shaw, Edmundo Corona, Mark A. Iadicola, 2002 .

Evaluation of cyclic plasticity models in ratcheting simulation of straight pipes under cyclic bending and steady internal pressure

Edmundo Corona, Tasnim Hassan, T. Hassan, 2008 .

Nanomechanics of hard films on compliant substrates.

N. Moody, D. Bahr, D. Adams, 2009 .

On the performance of kinematic hardening rules in predicting a class of biaxial ratcheting histories

Stelios Kyriakides, Edmundo Corona, Tasnim Hassan, 1996 .

Localization and propagation of curvature under pure bending in steel tubes with Lüders bands

Stelios Kyriakides, Edmundo Corona, S. Kyriakides, 2008 .

Plastic Buckling and Collapse of Tubes Under Bending and Internal Pressure

S. Kyriakides, A. Limam, E. Corona, 2008 .

Yield anisotropy effects on buckling of circular tubes under bending

Stelios Kyriakides, Edmundo Corona, S. Kyriakides, 2006 .

Degradation and collapse of square tubes under cyclic bending

Edmundo Corona, Suhas P. Vaze, E. Corona, 1998 .

Buckling of elastic—plastic square tubes under bending

Edmundo Corona, Suhas P. Vaze, E. Corona, 1996 .

An experimental investigation of the degradation and buckling of circular tubes under cyclic bending and external pressure

Stelios Kyriakides, Edmundo Corona, S. Kyriakides, 1991 .

On the collapse of inelastic tubes under combined bending and pressure

Stelios Kyriakides, Edmundo Corona, S. Kyriakides, 1988 .

Response and collapse of foam-supported sheet metal beams and shallow arches

Jyhwen Wang, E. Corona, 2008 .

Collapse of partially corroded or worn pipe under external pressure

Stelios Kyriakides, Edmundo Corona, Naoto Sakakibara, 2008 .

Bending of long cross-ply composite circular cylinders

Edmundo Corona, E. Corona, Ashok Rodrigues, 1995 .

Pipe and Tube Manufacturing Processes

S. Kyriakides, E. Corona, 2007 .

On bend-stretch forming of aluminum extruded tubes — II: analysis

Stelios Kyriakides, J. E. Miller, Edmundo Corona, 2001 .

Anisotropic plasticity model forms for extruded Al 7079: Part I, calibration

S. Kramer, E. Corona, W. Scherzinger, 2020 .

Anisotropic plasticity model forms for extruded Al 7079: Part II, validation

S. Kramer, E. Corona, W. Scherzinger, 2022, International Journal of Solids and Structures.

Plastic Buckling and Collapse Under Axial Compression

S. Kyriakides, E. Corona, 2007 .

Dynamics of Large Rings of Coupled Van der Pol Oscillators

Mihir Sen, E. Corona, Miguel A. Barron, 2008 .

Inelastic wrinkling and collapse of tubes under combined bending and internal pressure

Stelios Kyriakides, Edmundo Corona, Ali Limam, 2010 .

Effect of yield surface evolution on bending induced cross sectional deformation of thin-walled sections

Stelios Kyriakides, J. E. Miller, Edmundo Corona, 2004 .

A simple analysis for bend-stretch forming of aluminum extrusions

Edmundo Corona, E. Corona, 2004 .

Asymmetric collapse modes of pipes under combined bending and external pressure

Stelios Kyriakides, Edmundo Corona, S. Kyriakides, 2000 .

Buckling and Collapse Under Combined Bending and External Pressure

Stelios Kyriakides, Edmundo Corona, S. Kyriakides, 2007 .

Buckling and Collapse Under External Pressure

Stelios Kyriakides, Edmundo Corona, S. Kyriakides, 2007 .

Inelastic Response, Buckling and Collapse Under Pure Bending

S. Kyriakides, E. Corona, 2007 .

Structural Degradation of Elastic-Plastic Tubes Due to Cyclic Loads

S. Kyriakides, E. Corona, 1989 .

AN UNUSUAL MODE OF COLLAPSE OF TUBES UNDER COMBINED BENDING AND PRESSURE

Stelios Kyriakides, E. Corona, S. Kyriakides, 1987 .