Youngseog Lee

发表

Blast Load Model Generating Multiple Impulse Curves for Different Scaled Distances

B. Jang, Seul Lee, Youngseog Lee, 2018, Combustion, Explosion, and Shock Waves.

Performance and emission characteristics of additives-enhanced heavy fuel oil in large two-stroke marine diesel engine

Younghyun Ryu, J. Nam, Youngseog Lee, 2016 .

An approximate model to predict the surface profile of material sections in a 3-roll rolling process

Youngseog Lee, S. Byon, Sang-Rog Kim, 2017 .

Effect of Strain Rate and Material Hardness on Residual Stress in Multiple Impact Shot Peening

Youngseog Lee, Tae-Woo Kim, Zhaorui Yang, 2011 .

An Investigation on the Effect of Design Parameters of Side Guide on Camber in Hot Slab Rolling

Youngseog Lee, S. Byon, Y. Lee, 2014 .

Flow stress equation in range of intermediate strain rates and high temperatures to predict roll force in four-pass continuous rod rolling

Youngseog Lee, S. Byon, D. Na, 2013 .

Alloying and aging effects on the fatigue crack growth of duplex stainless steels

Youngseog Lee, C. Lee, D. Li, 1998 .

TEMPERATURE DEPENDENT FRACTURE MODEL AND ITS APPLICATION TO ULTRA HEAVY THICK STEEL PLATE USED FOR SHIPBUILDING

G. An, Joonsik Park, Youngseog Lee, 2008 .

Rod and Bar Rolling: Theory and Applications

Youngseog Lee, 2004 .

Pass Schedule Design to Inhibit Surface Cracks Generation on Workpiece in Groove Rolling Process

Youngseog Lee, D. Na, 2010 .

Mathematical model to simulate thermo-mechanical controlled processing in rod (or bar) rolling

S. Choi, Youngseog Lee, Su-Jung Kim, 2001 .

Finite element–based inverse approach to estimate the friction coefficient in hot bar rolling process

Youngseog Lee, S. Byon, H. J. Lee, 2018 .

Evaluation of the prediction ability of ductile fracture criteria over a wide range of drawing conditions

Youngseog Lee, Y. Jang, Dong-Geun Cho, 2019, Journal of Mechanical Science and Technology.

Prediction Model of the Exit Cross Sectional Shape in Round-Oval-Round Pass Rolling

Youngseog Lee, Gert Goldhahn, Youngseog Lee, 2001 .

Dynamic fracture toughness of 4340 VAR steel under conditions of plane strain

V. Prakash, Youngseog Lee, 1995 .

Deformation analysis of micro-sized material using strain gradient plasticity

Youngseog Lee, S. Byon, 2006 .

Strain gradient plasticity based finite element analysis of ultra-fine wire drawing process

Youngseog Lee, S. Byon, Y. Lee, 2009 .

Investigation of the size effect on crack propagation using finite element method and strain gradient plasticity

Hyoung-Seop Kim, Youngseog Lee, S. Byon, 2007 .

A cohesive surface separation potential

Youngseog Lee, Kwang Soo Kim, 2002 .

A comparative study of microstructures and mechanical properties obtained by bar and plate rolling

P. Hodgson, Youngseog Lee, Sangwoo Choi, 2002 .

A study of the influence of strain path change on the microstructure and mechanical properties of low carbon steel using plate and bar rolling

Youngseog Lee, Soochan Lee, Sangwoo Choi, 2001 .

A method to construct the fracture locus in the range of high stress triaxiality when only a round tensile specimen is available

Youngseog Lee, Y. Jang, 2019, Journal of Mechanical Science and Technology.

Effect of retained austenite phase on springback of cold-rolled TRIP steel sheets

Youngseog Lee, Sungil Kim, 2011 .

A roll-bending approach to suppress the edge cracking of silicon steel in the cold rolling process

Youngseog Lee, S. Byon, Zhaorui Yang, 2021 .

Improvement of Radiant Heat Efficiency of the Radiant Tube Used for Continuous Annealing Line by Application of Additive Manufacturing Technology

Youngseog Lee, Yong-Hoon Roh, W. Ha, 2020, Applied Sciences.

Process Condition Diagram Predicting Onset of Microdefects and Fracture in Cold Bar Drawing

Youngseog Lee, Zhaorui Yang, Dong-Geun Cho, 2021, Metals.

Dynamic brittle fracture of high strength structuralsteels underconditions of plane strain

V. Prakash, Youngseog Lee, 1999 .

Study of Crack Propagation and Absorbed Energy in Heat Affected Zone Using a Finite Element Method

Youngseog Lee, Y. Jang, 2009 .

Analytical model of pass-by-pass strain in rod (or bar) rolling and its applications to prediction of austenite grain size

Peter Hodgson, P. Hodgson, Youngseog Lee, 2002 .

An experimental study on the optimization of powder forging process parameters for an aluminum-alloy piston

Dae-Yong Kang, Jong-Ook Park, Youngseog Lee, 2001 .

TEMPERATURE DEPENDENT FRACTURE MODEL AND ITS APPLICATION TO ULTRA HEAVY THICK STEEL PLATE USED FOR SHIPBUILDING

Youngseog Lee, Sung-Il Kim, Gyu Baek An, 2008 .

Feasibility study of partial recrystallisation in multi-pass hot deformation process and application to calculation of mean flow stress

Peter Hodgson, P. Hodgson, J. Woo, 2002 .

Numerical simulations of dynamic plastic shear instability under conditions of plane strain

V. Prakash, Youngseog Lee, 1998 .

A new approach to predicting partial recrystallization in the multi-pass hot rolling process

Youngseog Lee, Sangwoo Choi, 2002 .

FE SIMULATION OF EDGE CRACK INITIATION AND PROPAGATION OF CONVENTIONAL GRAIN ORIENTATION ELECTRICAL STEEL

Youngseog Lee, D. Na, 2008 .

Numerical Analysis of Edge Cracking in High-Silicon Steel during Cold Rolling with 3D Fracture Locus

Youngseog Lee, S. Byon, Yong-Hoon Roh, 2021, Applied Sciences.

Analysis of the Influence of High Peening Coverage on Almen Intensity and Residual Compressive Stress

Youngseog Lee, Shangwen He, Zhaorui Yang, 2019, Applied Sciences.

A strip holding system for finite element simulation of Almen strip testing

Youngseog Lee, Jun Su Park, Zhaorui Yang, 2014 .

A strip holding system for finite element simulation of Almen strip testing

J. S. Park, Youngseog Lee, Zhaorui Yang, 2014, Journal of Mechanical Science and Technology.

Development of a Machine Learning Based Fast Running Model to Determine Rapidly the Process Conditions in Drawing Process

Donghyuk Cho, Youngseog Lee, Youngseog Lee, 2019, International Journal of Automotive Technology.

Modeling of recrystallization and austenite grain size for AISI 316 stainless steel and its application to hot bar rolling

Youngseog Lee, Sungil Kim, B. Jang, 2003 .

Dynamic fracture toughness versus crack tip speed relationship at lower than room temperature for high strength 4340VAR structural steel

V. Prakash, Youngseog Lee, 1998 .

Scratch characteristics for non-vinyl pre-coated metal sheet using the simple U-bending process

D. Kim, Youngseog Lee, B. Kim, 2003 .

Calculation of strain gradient in flow formulation using strain surface function and its applications to micro rolling

Youngseog Lee, S. Byon, 2007 .

Modeling of AGS and recrystallized fraction of microalloyed medium carbon steel during hot deformation

Youngseog Lee, D. Lee, Sungil Kim, 2003 .

Experimental and finite element analysis for fracture of coating layer of galvannealed steel sheet

Youngseog Lee, S. Kim, Y. Jang, 2011 .

A study for the constitutive equation of carbon steel subjected to large strains, high temperatures and high strain rates

Kang-Yeob Park, Oak-Key Min, Youngseog Lee, 2002 .

Influence of Cooling Rate on the Hot Cracking Formation of Nickel Rich Alloys

S. K. Kim, Youngseog Lee, H. Fredriksson, 2002 .

Thermal Stress Evolution of the Roll During Rolling and Idling in Hot Strip Rolling Process

Youngseog Lee, D. Na, C. Moon, 2014 .

Effect of coating material and lubricant on forming force and surface defects in wire drawing process

Youngseog Lee, S. Byon, Y. Lee, 2011 .

Experimental study on variations in charpy impact energies of low carbon steel, depending on welding and specimen cutting method

Youngseog Lee, Zhaorui Yang, Hansaem Kang, 2016 .

Experimental study on variations in charpy impact energies of low carbon steel, depending on welding and specimen cutting method

Youngseog Lee, Zhaorui Yang, Hansaem Kang, 2016, Journal of Mechanical Science and Technology.

Effect of the welding residual stress redistribution on impact absorption energy

Youngseog Lee, Zhaorui Yang, 2015 .

Analytical model for prediction of deformed shape in three-roll rolling process

Yong-Taek Im, Youngseog Lee, Jh Min, 2003 .

An in-line model for predicting front end bending in hot plate rolling and its experimental verification

Youngseog Lee, Sang Min Byon, Youngseog Lee, 2013 .

An experimental study of the mean effective strain in rod (or bar) rolling process

Sangwoo Choi, W. Y. Choo, Youngseog Lee, 2000 .

Structural Integrity Assessment of Defected Gas Pipelines Using a Simplified Ductile Damage Model

Youngseog Lee, Ik-joong Kim, Jong-hyun Baek, 2021, Journal of Pressure Vessel Technology.

A method to construct the fracture locus in the range of high stress triaxiality when only a round tensile specimen is available

Youngseog Lee, Y. Jang, 2019, Journal of Mechanical Science and Technology.

Integrated model for thermo-mechanical controlled process in rod (or bar) rolling

Peter Hodgson, Sangwoo Choi, Youngseog Lee, 2002 .

Analytical model of pass‐by‐pass strain in bar rolling and its verification

Byung-Min Kim, Youngseog Lee, Youngseog Lee, 2002 .

Analytic model for the prediction of mean effective strain in rod rolling process

Hyungjun Kim, Sunyong Hwang, Youngseog Lee, 2001 .

Static and Metadynamic Recrystallization of Interstitial Free Steels during Hot Deformation

P. Hodgson, Youngseog Lee, Sungil Kim, 2004 .