Hideki Hyuga

发表

Effect of high temperature cycling on both crack formation in ceramics and delamination of copper layers in silicon nitride active metal brazing substrates

N. Izu, Y. Yoshizawa, K. Hirao, 2017 .

Effect of mechanical properties of the ceramic substrate on the thermal fatigue of Cu metallized ceramic substrates

H. Hirotsuru, K. Hirao, H. Miyazaki, 2016, 2016 IEEE 18th Electronics Packaging Technology Conference (EPTC).

Development of efficient fabrication processes for highly functional silicon nitride ceramics: a review

Hideki Hyuga, 2018, Journal of the Ceramic Society of Japan.

Review and Overview of Silicon Nitride and SiAlON, Including their Applications

K. Hirao, Hideki Hyuga, H. Kita, 2013 .

The Relationship Between Multiple Scratch Tests and Wear Behavior of Hot‐Pressed Silicon Nitride Ceramics with Various Rare‐Earth Additive Systems

K. Hirao, Y. Yamauchi, Katsumi Yoshida, 2007 .

Friction and Wear Properties of Si3N4/Carbon Fiber Composites with Aligned Microstructure

K. Hirao, Y. Yamauchi, Hideki Hyuga, 2005 .

Microstructural characteristics in silicon nitride/tungsten composites by different in-situ processing

K. Hirao, Y. Yamauchi, Hideki Hyuga, 2004 .

Fabrication and mechanical properties of Si3N4/Carbon fiber composites with aligned microstructure produced by a seeding and extrusion method

K. Hirao, Y. Yamauchi, Hideki Hyuga, 2004 .

Influence of carbon fibre content on the processing and tribological properties of silicon nitride/carbon fibre composites

K. Hirao, Y. Yamauchi, Hideki Hyuga, 2004 .

Processing and Tribological Properties of Si3N4/Carbon Short Fiber Composites

K. Hirao, Y. Yamauchi, Hideki Hyuga, 2003 .

Accelerated thermal fatigue test of metallized ceramic substrates for SiC power modules by repeated four-point bending

Hiroshi Sato, H. Hirotsuru, K. Hirao, 2018, 2018 IEEE 30th International Symposium on Power Semiconductor Devices and ICs (ISPSD).

Improved resistance to thermal fatigue of active metal brazing substrates for silicon carbide power modules using tough silicon nitrides with high thermal conductivity

N. Izu, H. Hirotsuru, K. Hirao, 2018, Ceramics International.

Highly thermal-fatigue resistant Si3N4 substrates with excellent mechanical and thermal properties

N. Izu, H. Hirotsuru, K. Hirao, 2017, 2017 29th International Symposium on Power Semiconductor Devices and IC's (ISPSD).

Correlation of wear behavior and indentation fracture resistance in silicon nitride ceramics hot-pressed with alumina and yttria

Y. Yoshizawa, K. Hirao, T. Ohji, 2009 .

Improving the thermal conductivity of epoxy composites using a combustion-synthesized aggregated β-Si3N4 filler with randomly oriented grains

Y. Hotta, K. Hirao, Hideki Hyuga, 2020, Scientific Reports.

Tribological Behavior of Si3N4 and Si3N4/Carbon Fiber Composites Against Stainless Steel Under Water Lubrication for a Thrust-Bearing Application

D. Rani, Y. Yoshizawa, K. Hirao, 2008 .

Effects of yttria and magnesia on densification and thermal conductivity of sintered reaction-bonded silicon nitrides

K. Hirao, Hideki Hyuga, You Zhou, 2018, Journal of the American Ceramic Society.

Synthesis of MgSiN2 under 0.1 MPa of nitrogen pressure via combustion

S. Hashimoto, Y. Ozeki, Hideki Hyuga, 2021, Ceramics International.

Fracture Resistance Behavior of High‐Thermal‐Conductivity Silicon Nitride Ceramics

N. Murayama, Y. Yoshizawa, K. Hirao, 2014 .

Fabrication and Properties of High Thermal Conductivity Silicon Nitride

K. Hirao, T. Ohji, Hideki Hyuga, 2013 .

High Thermal Conductivity Silicon Nitride Ceramics

K. Hirao, T. Ohji, Hideki Hyuga, 2012 .

Recent Developments in High Thermal Conductivity Silicon Nitride Ceramics

K. Hirao, Hideki Hyuga, You Zhou, 2011 .

Study of modification on alumina surface by using of organosilicon polymer

Hideki Hyuga, H. Kita, N. Kondo, 2011 .

Synthesis of precursor for fibrous mullite powder by alkoxide hydrolysis method

Katsumi Yoshida, Hideki Hyuga, H. Kita, 2010 .

Crack profiles under a Vickers indent in silicon nitride ceramics with various microstructures

Y. Yoshizawa, K. Hirao, T. Ohji, 2010 .

A Tough Silicon Nitride Ceramic with High Thermal Conductivity

Y. Yoshizawa, K. Hirao, Hideki Hyuga, 2011, Advanced materials.

Fiber template approach toward preparing one-dimensional silica nanostructure with rough surface

M. Fukushima, Hideki Hyuga, Yuki Nakashima, 2021 .

Energy efficient synthesis of porous ZrO2 with fine closed pores by microwave irradiation

S. Hashimoto, K. Hirao, Hideki Hyuga, 2013 .

Fabrication and characterization of porous ZrO2 with a high volume fraction of fine closed pores

S. Hashimoto, K. Hirao, Hideki Hyuga, 2013 .

Synthesis, microstructure and mechanical properties of reaction-infiltrated TiB2–SiC–Si composites

Hideki Hyuga, H. Kita, N. Kondo, 2011 .

Measurement of Indentation Fracture Toughness of Silicon Nitride Ceramics: I, Effect of Microstructure of Materials

Y. Yoshizawa, K. Hirao, T. Ohji, 2007 .

Surface modification of silica powder by mild ball milling

M. Fukushima, Hideki Hyuga, Yuki Nakashima, 2022, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

Reaction sintering of β-tricalcium phosphates and their mechanical properties

Katsumi Yoshida, Hideki Hyuga, K. Hashimoto, 2007 .

Substitution Model of Monovalent (Li, Na, and K), Divalent (Mg), and Trivalent (Al) Metal Ions for β‐Tricalcium Phosphate

Katsumi Yoshida, Hideki Hyuga, K. Hashimoto, 2006 .

Joining of SiC by Al infiltrated TiC tape: Effect of joining parameters on the microstructure and mechanical properties

Hideki Hyuga, H. Kita, N. Kondo, 2012 .

Tribological Behaviour of α/ß Composite SiAlON Ceramics

S. Kanzaki, K. Hirao, Y. Yamauchi, 2003 .

Fabrication of porous silica ceramics by gelation-freezing of diatomite slurry

M. Fukushima, Y. Yoshizawa, Hideki Hyuga, 2017 .

Preparation of porous diatomite ceramics by an alkali treatment near room temperature

M. Fukushima, Hideki Hyuga, Yuki Nakashima, 2021 .

In situ synthesis of Mo5Si3 particle reinforced Si3N4 composite with crystallized grain boundary phase of Yb2Si2O7

Hideki Hyuga, T. Iizuka, H. Kita, 2005 .

Effects of Impurity Iron Content on Characteristics of Sintered Reaction‐Bonded Silicon Nitride

K. Hirao, Hideki Hyuga, You Zhou, 2013 .

In Situ Measurement of Shrinkage During Postreaction Sintering of Reaction-Bonded Silicon Nitride

Junichi Tatami, K. Komeya, Hideki Hyuga, 2008 .

Highly Transparent Lu‐α‐SiAlON

K. Hirao, Y. Yamauchi, Hideki Hyuga, 2004 .

Effect of Aluminum Content on Mechanical Properties and Thermal Conductivities of Sintered Reaction‐Bonded Silicon Nitride

K. Hirao, Hideki Hyuga, You Zhou, 2014 .

In Situ Synthesis and Microstructures of Tungsten Carbide‐Nanoparticle‐Reinforced Silicon Nitride‐Matrix Composites

Hideki Hyuga, T. Iizuka, H. Kita, 2004 .

Fabrication of Dense β‐SiAlON Ceramics with ZrO2 Additions Via a Rapid Reaction‐Bonding and Postsintering Route

Hideki Hyuga, H. Kita, N. Kondo, 2011 .

Wear behaviour of single phase and composite sialon ceramics stabilized with Y2O3 and Lu2O3

K. Hirao, Y. Yamauchi, Hideki Hyuga, 2004 .

Fabrication of pressureless sintered dense β-SiAlON via a reaction-bonding route with ZrO2 addition

Katsumi Yoshida, Hideki Hyuga, H. Kita, 2009 .

Nitridation enhancing effect of ZrO2 on silicon powder

Katsumi Yoshida, Hideki Hyuga, H. Kita, 2008 .

Development of high-thermal-conductivity silicon nitride ceramics

Y. Yoshizawa, K. Hirao, T. Ohji, 2015 .

Nitridation behaviour of ZrO2 added silicon powder with different ZrO2 particle sizes

Katsumi Yoshida, Hideki Hyuga, H. Kita, 2009 .

Rapid fabrication of Al4SiC4 using a self-propagating high-temperature synthesis method

S. Hashimoto, Hideki Hyuga, Yuki Nakashima, 2020 .

Joining of SiC with Si infiltrated tape-cast TiB2–C interlayer: Effect of interlayer composition and thickness on the microstructure and mechanical properties

Hideki Hyuga, H. Kita, N. Kondo, 2011 .

Influence of Rare-Earth Additives on Wear Properties of Hot-Pressed Silicon Nitride Ceramics under Dry Sliding Conditions

K. Hirao, Y. Yamauchi, Hideki Hyuga, 2004 .

Reaction joining of SiC ceramics using TiB2-based composites

Hideki Hyuga, H. Kita, N. Kondo, 2010 .

Pressureless sintering of boron carbide ceramics

Y. Yoshizawa, H. Miyazaki, Hideki Hyuga, 2008 .

Strength and Microstructure of Silicon Nitride Fabricated by Post-Sintering Process Using Low-Purity Silicon Powder as Raw Materials

Hideki Hyuga, T. Iizuka, H. Kita, 2004 .

Semi-homogeneous joining of silicon nitride with a silicon nitride powder insert

Hideki Hyuga, H. Kita, Mikinori Hotta, 2011 .

Influence of Carbon Fiber Additions on Friction Properties and Running‐In Behavior of Silicon Nitride‐Based Composites Under Water Lubrication

K. Hirao, Y. Yamauchi, Hideki Hyuga, 2005 .

Tribological Behavior of a Si3N4/Carbon Short Fiber Composite under Water Lubrication

K. Hirao, Y. Yamauchi, Hideki Hyuga, 2004 .

Green Manufacturing of Silicon Nitride Ceramics

T. Ohji, Hideki Hyuga, N. Kondo, 2016 .

Semi-homogeneous joining of silicon nitride using oxynitride glass insert containing silicon nitride powder and post-heat treatment

Hideki Hyuga, H. Kita, Mikinori Hotta, 2012 .

Nitridation behaviors of silicon powder doped with various rare earth oxides

K. Hirao, Hideki Hyuga, You Zhou, 2011 .

Processing and Properties of in Situ‐Reinforced α‐SiAlONs Stabilized with Y2O3 and Lu2O3

K. Hirao, Y. Yamauchi, Hideki Hyuga, 2004 .

Wear properties under dry sliding of Lu-α sialons with in situ reinforced microstructures

K. Hirao, Y. Yamauchi, Hideki Hyuga, 2004 .

Effects of Impurity Oxygen Content in Raw Si Powder on Thermal and Mechanical Properties of Sintered Reaction‐Bonded Silicon Nitrides

K. Hirao, Hideki Hyuga, You Zhou, 2012 .

Influence of zirconia addition on reaction bonded silicon nitride produced from various silicon particle sizes

Katsumi Yoshida, Hideki Hyuga, H. Kita, 2008 .

Influence of Joining Pressure and Surface Roughness on Flexural Strength of Joined Boron Carbide Ceramics

Hideki Hyuga, H. Kita, W. Tian, 2012 .

Joining of B4C by Al–Si infiltrated TiC tape: Effect of Si content on joint microstructure and corrosion resistance

Hideki Hyuga, H. Kita, N. Kondo, 2012 .

Effect of composition and joining parameters on microstructure and mechanical properties of silicon carbide joints

Hideki Hyuga, H. Kita, N. Kondo, 2010 .

Effect of gelatin gel strength on microstructures and mechanical properties of cellular ceramics created by gelation freezing route

M. Fukushima, Y. Yoshizawa, T. Ohji, 2017 .

Comparison of fracture resistance as measured by the indentation fracture method and fracture toughness determined by the single-edge-precracked beam technique using silicon nitrides with different microstructures

K. Hirao, T. Ohji, H. Miyazaki, 2007 .

Processing and tribological properties of SiC/carbon short fiber composites

K. Hirao, Y. Yamauchi, Hideki Hyuga, 2006 .

Tribological Properties of B4C Ceramics Prepared by Pressureless Sintering and Annealed at Different Temperatures

S. Yamashita, Wei Zhang, F. Ozeki, 2020 .

A study on formation mechanisms of relief structure formed in situ on the surface of ceramics

S. Yamashita, Wei Zhang, W. Norimatsu, 2019 .

Influence of joining time and temperature on the flexural strength of joined boron carbide ceramics

Hideki Hyuga, H. Kita, W. Tian, 2012 .

Low-temperature joining of boron carbide ceramics

Hideki Hyuga, H. Kita, W. Tian, 2012 .

Microstructure of boron carbide pressureless sintered in an Ar atmosphere containing gaseous metal species

Y. Yoshizawa, H. Miyazaki, Hideki Hyuga, 2010 .

Characterization of TiCxN1-x-TiCrNbMoTa composites as refractory hard materials

Hideki Hyuga, R. Furushima, 2022, International Journal of Refractory Metals and Hard Materials.

Improvement of thermal conductivity of WC-FeAl hard materials by elimination of oxide materials

Hideki Hyuga, R. Furushima, 2019, International Journal of Refractory Metals and Hard Materials.

Surface modification of graphite powder with lanthanum ultraphosphate by chemical process and its oxidation resistance

Katsumi Yoshida, Hideki Hyuga, H. Kita, 2015 .

Effect of amounts and types of silicon nitride on thermal conductivity of Si 3 N 4 /epoxy resin composite

Y. Hotta, K. Hirao, Hideki Hyuga, 2015 .

Fabrication of Thick Silicon Nitride by Reaction Bonding and Post-Sintering

Hideki Hyuga, H. Kita, N. Kondo, 2007 .

Nitridation behavior of silicon powder compacts of various thicknesses with Y2O3 and MgO as sintering additives

K. Hirao, Hideki Hyuga, You Zhou, 2017 .

High Thermal Conductivity and High Strength Sintered Reaction ‐ Bonded Silicon Nitride Ceramics Fabricated by using Low Grade Si Powder

K. Hirao, Hideki Hyuga, You Zhou, 2011 .

Development of High Thermal Conductivity Silicon Nitride Substrates

K. Hirao, Hideki Hyuga, You Zhou, 2017 .

High-efficiency Synthesis of Non-oxide Powder Using a Self-propagating High-temperature

Hideki Hyuga, Yuki Nakashima, 2022, Journal of the Society of Powder Technology, Japan.

Optical and Mechanical Properties of a/ Composite Sialons

K. Hirao, Hideki Hyuga, M. I. Jones, 2003 .

Wear properties of self-reinforced α-SiAlON ceramics produced by spark plasma sintering

M. Nygren, K. Hirao, Y. Yamauchi, 2004 .

Dry Sliding Wear of Lu2O3 Sialon Ceramics

K. Hirao, Y. Yamauchi, Hideki Hyuga, 2006 .

Wear properties of Y–α/β composite sialon ceramics

S. Kanzaki, K. Hirao, Y. Yamauchi, 2003 .

Mechanism for the formation of SiC by carbothermal reduction reaction using a microwave heating technique

S. Hashimoto, K. Hirao, Hideki Hyuga, 2011 .

Corrosion behavior of reaction bonded Si3N4-SiC and SiAlON-SiC composites in simulated aluminum smelting conditions

Y. Yoshizawa, K. Hirao, J. Metson, 2008 .

Comparison of Tribological Behavior Between α‐Sialon/Si3N4 and Si3N4/Si3N4 Sliding Pairs in Water Lubrication

D. Rani, Y. Yoshizawa, K. Hirao, 2005 .

Effect of calcium compounds in lubrication oil on the frictional properties of Fe2O3-Al2O3 ceramics under boundary lubricating conditions

M. Fukushima, Katsumi Yoshida, Hideki Hyuga, 2007 .

Joining of silicon nitride with silicon slurry via reaction bonding and post sintering

Hideki Hyuga, H. Kita, N. Kondo, 2010 .

Analysis and Quantification of Improvement in Green Manufacturing Process of Silicon Nitride Products

N. Mishima, K. Hirao, Hideki Hyuga, 2011 .

Relationship between fracture toughness determined by surface crack in flexure and fracture resistance measured by indentation fracture for silicon nitride ceramics with various microstructures

Y. Yoshizawa, K. Hirao, T. Ohji, 2009 .

Influence of Sintering Conditions on the Microstructure and Mechanical Properties of Si3N4 Ceramics with WB Addition

K. Hirao, Y. Yamauchi, Hideki Hyuga, 2004 .

Mechanical and wear properties of Si3N4-W composites using tungsten boride powder

K. Hirao, Y. Yamauchi, Hideki Hyuga, 2003 .

Stereo fabric modeling technology in ceramics manufacture

Hideki Hyuga, H. Kita, N. Kondo, 2008 .

Formation mechanism of Ti2AlC under the self-propagating high-temperature synthesis (SHS) mode

You Zhou, Sawao Honda, Shinobu Hashimoto, 2012 .

Effect of nanorelief structure formed in situ on tribological properties of ceramics in dry sliding

S. Yamashita, Wei Zhang, F. Ozeki, 2019, Ceramics International.

Pressureless Sintering of Boron Carbide in an Ar Atmosphere Containing Gaseous Metal Species

Y. Yoshizawa, H. Miyazaki, Hideki Hyuga, 2010 .

Study on friction behavior of SiC-B4C composite ceramics after annealing

S. Yamashita, Wei Zhang, F. Ozeki, 2019 .

Tribological behavior of ceramic materials (Si3N4, SiC and Al2O3) in aqueous medium

D. Rani, Y. Yoshizawa, K. Hirao, 2004 .

Expansion of Silicon Nitride-Boron Nitride Composite by Reaction Bonding

Guo‐Jun Zhang, Katsumi Yoshida, Hideki Hyuga, 2007 .

Fabrication of dense Al2O3-FeAl composites by using solid-state sintering

Hideki Hyuga, R. Furushima, 2019, International Journal of Refractory Metals and Hard Materials.

Joining of SiC by Tape-Cast SiC-Al2O3-Y2O3 Interlayer

Hideki Hyuga, H. Kita, N. Kondo, 2011 .

Fabrication of TiC-CoCrFeMoNi composites through various powder processes

Hideki Hyuga, R. Furushima, 2022, International Journal of Refractory Metals and Hard Materials.

Round-robin test on the fracture toughness of ceramic thin plates through modified single edge-precracked plate method

Y. Yoshizawa, K. Hirao, T. Ohji, 2016 .

Enhancement of thermoelectric performance in rare earth-doped Sr3Ti2O7 by symmetry restoration of TiO6 octahedra

H. Ohta, K. Koumoto, Yifeng Wang, 2010 .

High Thermal Conductivity Silicon Nitride substrates for Power Semiconductor Applications

K. Hirao, Hideki Hyuga, You Zhou, 2016 .

Thermal conductivity analysis using three‐dimensional microstructures of gelation freezing derived cellular mullite

M. Fukushima, Y. Yoshizawa, Hideki Hyuga, 2018 .

Enhancement of Seebeck coefficient for SrO(SrTiO3)2 by Sm substitution: Crystal symmetry restoration of distorted TiO6 octahedra

H. Ohta, K. Koumoto, Yifeng Wang, 2007 .

Oil wettability and sliding properties of organic and inorganic hybrid coating films prepared from methyltriethoxysilane and various metal alkoxides

M. Fukushima, Yasuto Hoshikawa, Hideki Hyuga, 2006 .

Influence of Microstructure and Grain Boundary Phase on Tribological Properties of Si3N4 Ceramics

S. Sakaguchi, S. Kanzaki, K. Hirao, 2008 .

Porous Ceramics Processing

P. Colombo, M. Fukushima, Y. Yoshizawa, 2020 .

Joining of Silicon Nitride with Glass or Powder Under Mechanical Pressure

Hideki Hyuga, H. Kita, N. Kondo, 2010 .

Improvement in Thermal Conductivity of Silicon Nitride Ceramics via Microstructural Control and Their Application to Heat Dissipation Substrates

K. Hirao, H. Miyazaki, Hideki Hyuga, 2017 .

Influence of surface roughness parameters and surface morphology on friction performance of ceramics

S. Yamashita, Wei Zhang, F. Ozeki, 2019, Journal of the Ceramic Society of Japan.

Round‐robin exercise on the three‐ and four‐point flexural strength of thin ceramic plates for power modules

K. Hirao, H. Miyazaki, Hideki Hyuga, 2019, International Journal of Applied Ceramic Technology.

Evaluation of thermal resistance for metalized ceramic substrates using a microheater chip

K. Suganuma, S. Nagao, K. Hirao, 2021, International Journal of Applied Ceramic Technology.

Fabrication and Wettability Test of Silicon Nitrides with Ordered Protrusions

Katsumi Yoshida, Hideki Hyuga, H. Kita, 2007 .

Effect of Green Machining on Strength of Silicon Nitride with As-Sintered Surface

Hideki Hyuga, H. Kita, N. Kondo, 2007 .

Reaction sintering of two-dimensional silicon carbide fiber-reinforced silicon carbide composite by sheet stacking method

T. Yano, Katsumi Yoshida, Hideki Hyuga, 2007 .

Fabrication of dense albite aggregates by hot pressing

Y. Yoshizawa, Hideki Hyuga, M. Kido, 2022, Progress in Earth and Planetary Science.