Cheng Guo

发表

Full-field wing deformation measurement scheme for in-flight cantilever monoplane based on 3D digital image correlation

J. Liang, Leigang Li, Xiang Guo, 2014 .

Two flowing stress models for hot deformation of XC45 steel at high temperature

Cheng Guo, R. Chai, Li Yu, 2012 .

Constitutive modeling of hot deformation behavior of H62 brass

Cheng Guo, Cheng Guo, Yan-Hong Xiao, 2011 .

Constitutive modelling for high temperature behaviour of 12CrNiMoWV martensitic stainless steel

Cheng Guo, J. Zhong, Y. H. Xiao, 2012 .

An Experimental Study for the Effect of Contact Stress of Blank Holder and Punch Velocity on Crack Ratio of Fine-Blanked Surface

Cheng Guo, Ri-xian Ding, H. Zhang, 2012 .

Experimental Investigations on Anisotropic Evolution of 304 Stainless Sheets under Tensile Pre‐Strains

Cheng Guo, L. Teng, 2011 .

Constitutive modelling for high temperature behavior of 1Cr12Ni3Mo2VNbN martensitic steel

Cheng Guo, Cheng Guo, Yan-Hong Xiao, 2011 .

Assessment of anisotropic tensile strength using a modified shear punch test for Cu–Cr–Zr alloy processed by severe plastic deformation

Sheng-wu Guo, Cheng Guo, Ri-xian Ding, 2013 .

Improving fracture toughness and hardness of Fe2B in high boron white cast iron by chromium addition

Cheng Guo, J. Xing, Zhifu Huang, 2010 .

Constitutive relationship and microstructure for 20CrMnTiH steel during warm deformation

Cheng Guo, R. Chai, Faji Zhang, 2012 .

A constitutive model for spring-back prediction in which the change of Young's modulus with plastic deformation is considered

C. Guo, Cheng Guo, S. L. Zang, 2007 .

Grid-based photogrammetry system for large scale sheet metal strain measurement

Cheng Guo, Jin Liang, Hao Hu, 2014 .

Large deformation measurement scheme for 3D digital image correlation method

Jin Liang, Cheng Guo, Zhenzhong Xiao, 2012 .

Three-dimensional digital image correlation system for deformation measurement in experimental mechanics

Cheng Guo, Jin Liang, Hao Hu, 2010 .

Piezoelectric-based non-destructive monitoring of contact pressures in fine-blanking process

Zicai Zhu, Cheng Guo, Zicai Zhu, 2014 .

Influence of Selective Laser Melting Process Parameters on Densification Behavior, Surface Quality and Hardness of 18Ni300 Steel

Cheng Guo, L. Wen, Gan Li, 2020 .

Formability behaviors of 2A12 thin-wall part based on DYNAFORM and stamping experiment

Cheng Guo, Cheng Guo, Zhechen Guo, 2013 .

Photogrammetry-based two-dimensional digital image correlation with nonperpendicular camera alignment

Cheng Guo, Jin Liang, Zhengzong Tang, 2012 .

Exploitation of photogrammetry measurement system

Cheng Guo, Jin Liang, Jianwei Liu, 2010 .