R. Xiang

发表

Synthesizing low-cost, high-corrosion-resistant refractory kiln furniture for the calcination of Li-ion battery cathode materials

Shujing Li, Yuanbing Li, Xu Nana, 2020 .

Effect of particle size of fly ash on the properties of lightweight insulation materials

Shujing Li, Chen Ruoyu, Yuanbing Li, 2016 .

Hydration mechanism and sintering characteristics of hydratable alumina with microsilica addition

Shujing Li, Yuanbing Li, N. Xu, 2019, Ceramics International.

Microstructural evolution of carbon fibers by silicon vapor deposition and its effect on mullite-corundum castables

Shujing Li, Yuanbing Li, N. Xu, 2020 .

Microstructures and Properties of Carbon Fibers and in-situ Whiskers Reinforced Mullite-Based Castable Composites

Shujing Li, Yuanbing Li, N. Xu, 2020 .

Corrosion of Li-ion battery cathode materials on mullite insulation materials during calcination

Shujing Li, Yuanbing Li, Hailu Wang, 2022, Ceramics International.

Anti-Corrosion Effect of Insulating Firebrick Coated with Ca6 in the Calcination of Lithium-Ion Cathode Materials

Shujing Li, Yuanbing Li, Hailu Wang, 2022, SSRN Electronic Journal.

Effects of nano-alumina content on the formation of interconnected pores in porous purging plug materials

Shujing Li, Yuanbing Li, Xu Nana, 2017 .

Hydration behavior and microstructural evolution of hydratable alumina with different particle size in alumina-spinel castables

Shujing Li, Yuanbing Li, N. Xu, 2019, Journal of the Ceramic Society of Japan.

Effect of inorganic acid on the phase transformation of alumina

Shujing Li, Chen Ruoyu, L. Fang, 2017 .

Interactions of Li2O volatilized from ternary lithium-ion battery cathode materials with mullite saggar materials during calcination

Shujing Li, Yuanbing Li, Hailu Wang, 2022, Ceramics International.

A simple approach for improving high‐temperature mechanical and insulation performance in chamotte with added zircon

Shujing Li, Yuanbing Li, Z. Xue, 2019, International Journal of Applied Ceramic Technology.

Effect of Excess Magnesia on the Preparation of Cordierite Based on Waste Foundry Sand

Shujing Li, Yawei Li, Yuanbing Li, 2016 .

Controlled morphologies and hydration process of hydratable alumina by using citric acid

Shujing Li, Yuanbing Li, N. Xu, 2020, Journal of the Australian Ceramic Society.

Porous alumina ceramics with enhanced mechanical and thermal insulation properties based on sol-treated rice husk

Shujing Li, Yuanbing Li, N. Xu, 2018, Ceramics International.

Effects of cerium doping on the microstructure, mechanical properties, thermal conductivity, and dielectric properties of ZrP2O7 ceramics

Shujing Li, Yuanbing Li, N. Xu, 2022, Ceramics International.

Preparation and properties of alumina foams via thermally induced foaming of molten d-glucose monohydrate

Shujing Li, K. Huang, Yuanbing Li, 2017, Journal of Porous Materials.

Preparation of novel reticulated prickly porous ceramics with mullite whiskers

Shujing Li, Weijie Guo, Yuanbing Li, 2021 .

Exploring the potential of the mechanical/thermal properties and co-shielding ability of Bi2O3-doped aluminum borate ceramics against neutron/gamma radiation

Q. Yan, Shujing Li, Yuanbing Li, 2021 .

Novel aluminum borate foams with controllable structures as exquisite high-temperature thermal insulators

Shujing Li, Jun Luo, Yuanbing Li, 2020 .

Effect of Silicon Addition on the Properties of Carbon Fiber Reinforced Mullite Based Castable Composites

Shu Jing Li, N. Xu, R. Xiang, 2018, Solid State Phenomena.

New insight into treatment of foundry waste: porous insulating refractory based on waste foundry sand via a sacrificial fugitive route

Shujing Li, Yuanbing Li, Z. Xue, 2021, Journal of the Australian Ceramic Society.

Preparation of high‐strength lightweight alumina with plant‐derived pore using corn stalk as pore‐forming agent

Shujing Li, Yuanbing Li, R. Xiang, 2020 .

Novel method of fabricating ultra-light aluminum borate foams with hierarchical pore structure

Shujing Li, Yuanbing Li, R. Xiang, 2019, Materials Letters.

The potential usage of waste foundry sand from investment casting in refractory industry

Shujing Li, Yuanbing Li, Xu Nana, 2019, Journal of Cleaner Production.

Microstructural evolution and kinetics analysis of aluminum borate ceramics via solid‐state reaction synthesis

Shujing Li, Yuanbing Li, N. Xu, 2019, International Journal of Applied Ceramic Technology.

Microstructure and Phase Evolution of Cement-Bonded High-Alumina Refractory Castables for Porous Purging Plugs

S. Li, N. Xu, R. Xiang, 2018 .

Effects of critical particle size on properties and microstructure of porous purging materials

Shujing Li, Yuanbing Li, Xu Nana, 2017 .

Effects of particle size of Al(OH)3 on the properties of porous purging materials

Shujing Li, Yuanbing Li, N. Xu, 2017 .

Structural stability and neutron-shielding capacity of GdBO3-Al18B4O33 composite ceramics: Experimental investigation and numerical simulation

Shujing Li, Yuanbing Li, R. Xiang, 2021 .

Insight into the corrosion failure of mullite thermal insulation materials in carbon monoxide

Shujing Li, Yuanbing Li, Z. Xue, 2021, International Journal of Applied Ceramic Technology.

Corrosion degradation of mullite subject to carbon monoxide atmosphere at 1000 o C–1600°C

Shujing Li, Yuanbing Li, Z. Xue, 2020 .

Microscopic regulation of plant morphological pores on mechanical properties of porous mullite materials

Shujing Li, Yuanbing Li, R. Xiang, 2020 .

Effect of dispersion viscosity on microstructure of cordierite foam prepared by thermo-foaming

Shujing Li, Yuanbing Li, R. Xiang, 2019 .

Fabrication of ultra-high-porosity cordierite foams by the thermo-foaming of powder dispersions in molten D-glucose anhydrous

Shujing Li, Yuanbing Li, R. Xiang, 2019, Journal of Materials Research.

Fabrication of calcium hexaluminate‐based porous ceramic with microsilica addition

Shujing Li, Yuanbing Li, Xu Nana, 2018 .

Ultra-low-density calcium hexaaluminate foams prepared by sintering of thermo-foamed alumina-calcium carbonate powder dispersions in molten sucrose

Shujing Li, Yuanbing Li, R. Xiang, 2020, Journal of the Australian Ceramic Society.

Fabrication of Porous Mullite Ceramics with Different Phase of Alumina for Insulation Materials

Shu Jing Li, N. Xu, R. Xiang, 2018 .

One-step synthesis of porous thin-layered graphitic carbon nitride for enhanced photocatalytic dye degradation

Haizhou Yu, Zhe Chen, R. Xiang, 2023, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

Fabrication of basalt cotton/polytetrafluoroethylene (BC/PTFE) composite fiberboards with excellent dielectric properties over a wide frequency range

Shujing Li, Yuanbing Li, Hailu Wang, 2021, Journal of Materials Science: Materials in Electronics.

Synthesis of cordierite foam ceramics from kyanite tailings and simulated application effects

Shujing Li, Yuanbing Li, Hailu Wang, 2022, Materials Today Communications.

Effects of In-Situ-Formed 9 Al 2 O 3 ⋅ 2 B 2 O 3 on the Corrosion Resistance of Al 2 O 3-Based Porous Ceramic in Molten Aluminum

Y. Li, S. Li, D. Xiang, 2016 .

Hollow silica spheres planted on a three-dimensional skeleton of basalt cotton

Shujing Li, Yuanbing Li, Hailu Wang, 2021, Materials Letters.