I. Abdullah

发表

Effects of hydrolysis conditions on the morphology, crystallinity, and thermal stability of cellulose nanocrystals extracted from kenaf bast fibers

A. Dufresne, I. Ahmad, H. Kargarzadeh, 2012, Cellulose.

Composite of Aramid Fibre-Thermoplastic Natural Rubber: Effect of Processing Parameters and Compatibiliser

I. Ahmad, I. Abdullah, P. Wong, 2006 .

Cellulose nanocrystal: A promising toughening agent for unsaturated polyester nanocomposite

A. Dufresne, I. Ahmad, H. Kargarzadeh, 2015 .

Electrically Conductive Polystyrene/Polypyrrole Nanocomposites Prepared via Emulsion Polymerization

R. Daik, I. Abdullah, Hassan S. Ghalib, 2013 .

Extraction of cellulose nanocrystals from mengkuang leaves (Pandanus tectorius)

A. Dufresne, I. Ahmad, H. Kargarzadeh, 2012 .

The physical and chemical natures of cellulose extracted from torch ginger stems

I. Ahmad, I. Abdullah, F. A. Zaki, 2014 .

Effects of silane surface treatment of cellulose nanocrystals on the tensile properties of cellulose-polyvinyl chloride nanocomposite

H. Kargarzadeh, I. Abdullah, R. M. Sheltami, 2015 .

Structural Characterisation of Cellulose and Nanocellulose Extracted from Mengkuang Leaves

I. Ahmad, I. Abdullah, R. M. Sheltami, 2012 .

Mechanical and thermal properties of natural rubber-modified poly(lactic acid) compatibilized with telechelic liquid natural rubber

F. Anuar, I. Ahmad, I. Abdullah, 2016 .

Natural rubber -HDPE blends with liquid natural rubber as a compatibilizer. I. Thermal and mechanical properties

S. Kohjiya, S. Ahmad, I. Abdullah, 1994 .

Blending of natural rubber with linear low‐density polyethylene

S. Ahmad, I. Abdullah, C. S. Sulaiman, 1995 .

Reinforcement of Thermoplastics Natural Rubber Composite with Liquid Epoxidised Natural Rubber Treated Torch Ginger Fiber

I. Ahmad, I. Abdullah, Nurhafiza Kamaruddin, 2016 .

Permeability of carbon dioxide and nitrogen gases through SiO2 and MgO incorporated ENR/PVC membranes

R. Othaman, I. Abdullah, N. H. A. Karim, 2016 .

Toughened polyester cellulose nanocomposites: Effects of cellulose nanocrystals and liquid epoxidized natural rubber on morphology and mechanical properties

A. Dufresne, I. Ahmad, H. Kargarzadeh, 2015 .

Effects of PBO fiber and clay on the mechanical, morphological, and dynamic mechanical properties of NR/HDPE blends

I. Ahmad, I. Abdullah, R. Ismail, 2011 .

Influence of solvent and drop distance on the formation of ENR/PVC/silica aerogel beads

R. Othaman, I. Abdullah, N. A. Abdullah, 2013 .

Oil removal from water surface using reusable and absorptive foams via simple fabrication of liquid natural rubber (LNR)

I. Abdullah, A. Lazim, A. Azfaralariff, 2019, Polymer Testing.

Characterization and Evaluation of Prudent Liquid Natural Rubber-Based Foam for Oil Spill Control Application

I. Abdullah, A. Lazim, Chester Clement Chin, 2018 .

Influence of silica addition on the properties of epoxidised natural rubber/polyvinyl chloride composite membrane

R. Othaman, I. Abdullah, N. A. Abdullah, 2013 .

Effectiveness of cellulosic Agave angustifolia fibres on the performance of compatibilised poly(lactic acid)-natural rubber blends

F. Anuar, I. Ahmad, I. Abdullah, 2019, Cellulose.

Thermal Properties of Cellulose Nanocomposites

I. Ahmad, H. Kargarzadeh, I. Abdullah, 2017 .

Effect of rice husk surface modification by LENR on the mechanical properties of NR/HDPE reinforced rice husk composite

I. Ahmad, I. Abdullah, Rahmadini Syafri, 2011 .

Effect of Rice Husk Surface Modification by LENR the on Mechanical Properties of NR/HDPE Reinforced Rice Husk Composite (Kesan Rawatan Permukaan Sekam Padi dengan LENR ke Atas Sifat Mekanik Komposit NR/HDPE diperkuat Sekam Padi)

I. Ahmad, I. Abdullah, 2011 .

Natural Polymers, Biopolymers, Biomaterials, and Their Composites, Blends, and IPNs

I. Ahmad, H. Kargarzadeh, I. Abdullah, 2012 .

Electron-beam-irradiated rice husk powder as reinforcing filler in natural rubber/high-density polyethylene (NR/HDPE) composites

I. Ahmad, I. Abdullah, C. E. Lane, 2012 .

Celluloses filled ENR/PVC membranes for palm oil mill effluent (POME) treatment

R. Othaman, I. Abdullah, Mohd Razali Shamsuddin, 2013 .

Potential of using multiscale kenaf fibers as reinforcing filler in cassava starch-kenaf biocomposites.

A. Dufresne, I. Ahmad, H. Kargarzadeh, 2013, Carbohydrate polymers.

Effects of Rice Husk Filler on the Mechanical and Thermal Properties of Liquid Natural Rubber Compatibilized High-Density Polyethylene/Natural Rubber Blends

I. Ahmad, I. Abdullah, M. Jamil, 2006 .

The contribution of eco-friendly bio-based blends on enhancing the thermal stability and biodegradability of Poly(lactic acid)

F. Anuar, I. Ahmad, I. Abdullah, 2018, Journal of Cleaner Production.

Functionalized Liquid Natural Rubber and Liquid Epoxidized Natural Rubber: A Promising Green Toughening Agent for Polyester

Sabu Thomas, A. Dufresne, I. Ahmad, 2015 .

Functionalization of Liquid Natural Rubber via Oxidative Degradation of Natural Rubber

R. Daik, I. Abdullah, S. Ibrahim, 2014 .

Effect of Groove Size on Mechanical Properties and Microstructure Due to Reinforcement Addition in Friction Stir Welded Dissimilar Alloys

I. Abdullah, Ravinder Reddy Baridula, M. FaizalC.K., 2017 .

Study of Some Physical and Mechanical Properties of Silver-Based Hybrid Composites Mu ' tazaballah

I. Abdullah, Adnan Ahmed, Shehab Ahmed Zidan, 2018 .

Effects of Fiber Size and Fiber Content on Mechanical and Physical Properties of Mengkuang Reinforced Thermoplastic Natural Rubber Composites

I. Ahmad, A. Baharum, W. Mohamed, 2018 .

Hydrophobic modification of cellulose isolated from Agave angustifolia fibre by graft copolymerisation using methyl methacrylate.

F. Anuar, I. Ahmad, I. Abdullah, 2015, Carbohydrate polymers.

Application of polymethylmethacrylate-grafted cellulose as reinforcement for compatibilised polylactic acid/natural rubber blends.

F. Anuar, I. Ahmad, I. Abdullah, 2019, Carbohydrate polymers.

Isolation and Characterization of Cellulose Nanocrystals from Agave angustifolia Fibre

I. Ahmad, I. Abdullah, Noor Afizah Rosli, 2013 .

Effect of Extrusion Rate and Fiber Loading on Mechanical Properties of Twaron Fiber-thermoplastic Natural Rubber (TPNR) Composites

I. Ahmad, A. Baharum, I. Abdullah, 2006 .

Mechanical Properties of Bio-Composite Natural Rubber/High Density Polyethylene/Mengkuang Fiber (NRHDE/MK)

A. Baharum, I. Abdullah, M. B. M. Piah, 2016 .

Reinforcement of natural rubber/high density polyethylene blends with electron beam irradiated liquid natural rubber-coated rice husk

I. Ahmad, I. Abdullah, E. Chong, 2010 .

Liquid Rubbers as Toughening Agents

I. Ahmad, H. Kargarzadeh, I. Abdullah, 2014 .

Electrical properties and longitudinal modulus of superconductor/polymer NdBa2Cu3O7−δ/PVC composites

I. Abdullah, R. Abd-Shukor, I. Hamadneh, 2001 .

Dynamic magnetic properties of superconductor/polymer NdBCO/PVC composites

S. A. Halim, I. Abdullah, R. Abd-Shukor, 2002 .

Hydrogenation of liquid natural rubber via diimide reduction in hydrazine hydrate/hydrogen peroxide system

I. Abdullah, Muhammad Jefri Mohd Yusof, S. F. M. Yusoff, 2015 .

Characterization and Evaluation of Prudent Liquid Natural Rubber-Based Foam for Oil Spill Control Application

I. Abdullah, A. Lazim, Chester Clement Chin, 2018, Arabian Journal for Science and Engineering.

Preparation and characterisation of epoxidised natural rubber/polyvinyl chloride/rice husk (ENR/PVC/RH) thin film composite by solution casting technique

R. Othaman, I. Abdullah, Norfarhana Abdul Samad, 2014 .

Cellulose nanocrystal reinforced liquid natural rubber toughened unsaturated polyester: Effects of filler content and surface treatment on its morphological, thermal, mechanical, and viscoelastic properties

A. Dufresne, I. Ahmad, H. Kargarzadeh, 2015 .

Effects of fiber composition and graft-copoly(ethylene/maleic anhydride) on thermoplastic natural rubber composites reinforced by aramid fiber

I. Ahmad, I. Abdullah, P. Wong, 2006 .

Liquid Natural Rubber: Preparation and Application

I. Abdullah, 1994 .

SYNTHESIS, CHARACTERIZATION, AND PROPERTIES OF HYDROGENATED LIQUID NATURAL RUBBER

I. Abdullah, Muhammad Jefri Mohd Yusof, S. F. M. Yusoff, 2016 .

MECHANICAL PROPERTIES OF THE FRICTION STIR WELDED DISSIMILAR ALUMINIUM ALLOY JOINTS

Mansor Muhamad Arifpin, I. Abdullah, R. R. Varma, 2014 .

Studies on the adsorption of phenol red dye using silica-filled ENR/PVC beads

R. Othaman, A. Baharum, I. Abdullah, 2012 .

Electrical conductivity of anionic surfactant-doped polypyrrole nanoparticles prepared via emulsion polymerization

R. Daik, I. Abdullah, Hassan S. Ghalib, 2013 .

Synthesis of polypyrrole nanoparticles in natural rubber–polystyrene blend via emulsion polymerization

R. Daik, I. Abdullah, Hassan S. Ghalib, 2012 .

Preparation Of Natural Rubber/High Density Polyethylene Composite Reinforced Rice Husk Treated With Liquid Epoxidized Natural Rubber (LENR)

I. Abdullah, Rahmadini Syafri, Madya Dr. Ishak Ahmad, 2013 .

X-ray Diffraction Patterns of Activated Carbons Prepared under Various Conditions

B. Girgis, I. Abdullah, Y. Temerk, 2007 .

Effect of radiation on properties of ENR/PVC/SiO2 membrane

R. Othaman, R. Daik, I. Ahmad, 2015 .

Mechanical Properties of Epoxy/Rubber Blends

I. Ahmad, H. Kargarzadeh, I. Abdullah, 2017 .

Liquid natural rubber as a compatibiliser in the blending of natural rubber with polypropylene

S. Ahmad, I. Abdullah, 1992 .

MECHANICAL PROPERTIES OF FILLED NR/LLDPE BLENDS

Ibrahim Abdullah, I. Abdullah, Azizan Ahmad, 2004 .

Prediction of Temperatures During Friction Stir Welding of AA6061 Aluminium Alloy Using Hyperworks

I. Abdullah, M. FaizalC.K., R. Ramaraju, 2016 .

Study of Some Physical and Mechanical Properties of Silver-Based Hybrid Composites

I. Abdullah, Adnan Ahmed, Shehab Ahmed Zidan, 2018 .

Gas permeability of ENR/PVC membrane with the addition of inorganic fillers

R. Othaman, I. Abdullah, Farhan Mohd Nor, 2013 .

GRAFT COPOLYMERIZATION OF METHYL METHACRYLATE ONTO AGAVE CELLULOSE (Pengkopolimeran Cangkukan Metil Metakrilat ke atas Selulosa Agave)

F. Anuar, I. Ahmad, I. Abdullah, 2014 .

Modification of Cellulose by Polymethyl Methacrylate Grafting for Membrane Applications

R. Othaman, F. Anuar, I. Abdullah, 2013 .

Effect of Rotational Speed on Mechanical Properties and Microstructure Due to the Addition of Reinforcements on Friction Stir Welded Dissimilar Aluminum Alloys

I. Abdullah, M. FaizalC.K., R. Ramaraju, 2016 .

Effect of electron beam irradiation on natural rubber/linear low density polyethylene blends with m-phenylenebismaleimide

I. Abdullah, D. Mohd, N. Muhammad, 2011 .

Effect of Electron Beam Irradiation on Natural Rubber/Linear Low Density Polyethylene Blends with m-Phenylenebismaleimide (Kesan Sinaran Alur Elektron bersama m-Fenilenabismaleimida ke Atas Adunan Getah Asli/Polietilena Linear Berketumpatan Rendah)

I. Abdullah, N. Muhammad, 2011 .