D. Smith

发表

The effect of load excursions and specimen thickness on crack closure measurements

F. McMaster, D. Smith, 1999 .

On the consequences of T-stress in elastic brittle fracture

M. Pavier, M. Ayatollahi, D. Smith, 2006, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

Changes in perspectives of the values and benefits of nature

D. Smith, 2013 .

Residual stress measurement round robin on an electron beam welded joint between austenitic stainless steel 316L(N) and ferritic steel P91

A. K. Bhaduri, R. Ainsworth, C. Truman, 2017 .

Thermo-mechanical behaviour during encapsulation of glass in a steel vessel

B. Thomas, S. Nakhodchi, D. Smith, 2016 .

Laparoscopic and open partial nephrectomy: a UK centre's experience

D. Smith, N. Oakley, F. Youssef, 2014 .

Aspects of the steroid geochemistry of an interfacial sediment from the Peruvian upwelling

G. Eglinton, D. Smith, R. Morris, 1983 .

Bend stiffness and strength of laminates composed of titanium alloy and titanium metal matrix composite

Y. Zuo, D. Smith, A. Wisbey, 1997 .

A study of the generation and creep relaxation of triaxial residual stresses in stainless steel

C. Truman, D. Smith, S. Hossain, 2007 .

Incorporating ecosystem services and environmental planning: Translating a conceptual framework into decision making in a social-ecological system

P. James, D. Smith, P. Oldfield, 2011 .

A micromechanical fracture criterion accounting for in-plane and out-of-plane constraint

M. Pavier, M. Mostafavi, D. Smith, 2011 .

Using the ecosystem service framework to select grazing or mowing as a preferred vegetation management option

P. James, D. Smith, P. Oldfield, 2011 .

Behaviour of Defects at High Temperatures

S. Li, D. Smith, E. Ellison, 1993 .

Aspects of the steroid geochemistry of a recent diatomaceous sediment from the namibian shelf

G. Eglinton, D. Smith, R. Morris, 1982 .

Characterising electron beam welded dissimilar metal joints to study residual stress relaxation from specimen extraction

A. K. Bhaduri, C. Truman, D. Smith, 2016 .

Interaction of residual stress with mechanical loading in an austenitic stainless steel

C. Truman, Michael Smith, D. Smith, 2008 .

Micromechanical modelling of layered systems containing titanium alloy and titanium MMC subjected to bending

M. Pavier, M. M. Aghdam, D. Smith, 2000 .

Role of the misfit stress between grains in the Bauschinger effect for a polycrystalline material

Shu Yan Zhang, P. Flewitt, Jianan Hu, 2015 .

Microstructural sensitivity of 316H austenitic stainless steel: Residual stress relaxation and grain boundary fracture

D. Smith, P. Flewitt, D. Smith, 2010 .

Study on the effect of post weld heat treatment parameters on the relaxation of welding residual stresses in electron beam welded P91 steel plates

C. Truman, P. Bouchard, D. Smith, 2014 .

Using local out-of-plane compression (LOPC) to study the effects of residual stress on apparent fracture toughness

D. Smith, A. Mahmoudi, C. Truman, 2008 .

Reduction of measured toughness due to out‐of‐plane constraint in ductile fracture of aluminium alloy specimens

David J. Smith, Martyn J Pavier, Mahmoud Mostafavi, 2010 .

The Design of a Control System for a Superimposed Frequency Fatigue Test Machine

Dj Smith, David P Stoten, D. Stoten, 1993 .

A comparison between measured and modeled residual stresses in a circumferentially Butt-welded P91 steel pipe

Thomas H. Hyde, Adib A. Becker, A. H. Yaghi, 2010 .

Spatial variation of residual stresses in a welded pipe for high temperature applications

M. Pavier, D. Smith, S. Simandjuntak, 2009 .

Measuring and modelling residual stresses in a butt-welded P91 steel pipe

A. Becker, S. Simandjuntak, A. Yaghi, 2009, 2009 International Conference on Sustainable Power Generation and Supply.

Using a Strain Based Failure Assessment Diagram for Creep-Brittle Materials

D. J. Smith, D. Smith, A. Fookes, 2001 .

Measurement and Prediction of Residual Stresses in Quenched Stainless Steel Components

C. Truman, D. Smith, S. Hossain, 2014, Experimental Mechanics.

Prediction and Measurement of Through Thickness Residual stresses in Large Quenched Components

D. Smith, A. Mahmoudi, C. Truman, 2009 .

Quantifying internal stress and internal resistance associated with thermal ageing and creep in a polycrystalline material

David J. Smith, Jianan Hu, B Chen, 2014 .

The influence of plasticity in creep crack growth in steels

D. Smith, A. Fookes, 2003 .

PREDICTION OF REMAINING LIFE OF HIGH TEMPERATURE COMPONENTS USING NON‐LINEAR FRACTURE MECHANICS

David J. Smith, D. Smith, 1991 .

Creep and Fracture of Engineering Materials and Structures

D. Smith, M. Coleman, S. Kimmins, 1993 .

HIGH TEMPERATURE FATIGUE-CREEP BEHAVIOUR OF SINGLE CRYSTAL SRR99 NICKEL BASE SUPERALLOYS: PART II—FATIGUE-CREEP LIFE BEHAVIOUR

S. Li, D. Smith, 1995 .

Effect of elastic follow-up and ageing on the creep of an austenitic stainless steel

H. Coules, C. Truman, D. Smith, 2017 .

Influence of prior cyclic hardening on high temperature deformation and crack growth in type 316L (N) stainless steel

D. Smith, S. Li, D. Smith, 1998 .

Morphological and histological comparative study between lower lateral cartilages of cleft and non-cleft sides in unilateral cleft lip nasal deformity

D. Smith, Maasoumeh Saleh, 2017 .

An energy supply unit for an autonomous remote sensor system monitoring stored nuclear waste

Julian D Booker, Cj Aird, P. H. Mellor, 2011 .

Residual stress measurement in a repair welded header in the as-welded condition and after advanced post weld treatment

T. A. Dauda, Christopher E Truman, David J. Smith, 2007 .

Generation of residual stress and plastic strain in a fracture mechanics specimen to study the formation of creep damage in type 316 stainless steel

D. Smith, C. Truman, D. Smith, 2011 .

Characterisation of the Deformation and Fracture of Nuclear Graphite using Neutron Diffraction

P. Flewitt, K. Hallam, Dong Liu, 2017 .

Finite element micromechanical modelling of yield and collapse behaviour of metal matrix composites

David J. Smith, Martyn J Pavier, Mohammad Mohammadi Aghdam, 2000 .

Asymmetric behaviour of fibrous metal matrix composites

M. Pavier, D. Smith, M. Pavier, 2001 .

Geometry and size effects on fracture trajectory in a limestone rock under mixed mode loading

M.R.M. Aliha, Majid R. Ayatollahi, Martyn J Pavier, 2010 .

Size-dependent fracture behavior of Guiting limestone under mixed mode loading

M.R.M. Aliha, David J. Smith, Majid R. Ayatollahi, 2014 .

Mixed mode crack path investigation in a limestone rock using two circular shaped samples –An experimental and theoretical study

M. Pavier, M. Ayatollahi, M. Aliha, 2013, International Conference on Principles and Practice of Constraint Programming.

Geometry effects and statistical analysis of mode I fracture in guiting limestone

M.R.M. Aliha, Martyn J Pavier, David J. Smith, 2012 .

In situ measurement of the strains within a mechanically loaded polygranular graphite

Dong Liu, David M. Collins, Christina Reinhard, 2016 .

Stiffness measurements of diamond fibre reinforced plastic composites

P. May, D. Smith, P. Wigg, 2003 .

DIAMOND-FIBRE REINFORCED PLASTIC COMPOSITES

P. May, D. Smith, M. Hall, 2002 .

The reliability of structural systems operating at high temperature: Replacing engineering judgement with operational experience

DJ Smith, D. W. Dean, M. J. Chevalier, 2012 .

Micro-mechanics of off-axis loading of metal matrix composites using finite element analysis

David J. Smith, Martyn J Pavier, Mohammad Mohammadi Aghdam, 2001 .

Measured and predicted residual stresses in thick section electron beam welded steels

Christopher M. Gill, D. Smith, E. Kingston, 2014 .

[abstract] CONCORDANCE: A PROBLEM WITH THE CURRENT CLASSIFICATION OF DIVING DISORDERS

D. Smith, R. Pethybridge, T. Francis, 1992 .

Quantification of Constraint Effects in Fracture Mechanism Transition for Cracked Structures under Mixed Mode Loading

David J. Smith, Martyn J Pavier, Mahmoud Mostafavi, 2009 .

Fracture of Aluminium Alloy 2024 under Biaxial and Triaxial loading

David J. Smith, Martyn J Pavier, Mahmoud Mostafavi, 2011 .

Crack growth in brittle materials exhibiting primary creep

D. Smith, D. Smith, 1990 .

Interaction of residual stress with mechanical loading in a ferritic steel

Michael Smith, Christopher E Truman, A Mirzaee-Sisan, 2007 .

In situ neutron diffraction measurement of residual stress relaxation in a welded steel pipe during heat treatment

M. Pavier, Shu Yan Zhang, J. Kelleher, 2014 .

The broad clinical spectrum of bipolar disorder: implications for research and practice

N. Craddock, D. Smith, S. Ghaemi, 2008, Journal of psychopharmacology.

A STUDY OF SUPERIMPOSED FRACTURE MODES I, II AND III ON PMMA

David J. Smith, D. Smith, J. C. W. Davenport, 1993 .

The effect of specimen dimensions on mixed mode ductile fracture

M. Pavier, D. Smith, D. Smith, 2008 .

Approximating the upper bound in elastic stress intensity factor for a crack in an unknown residual stress field

H. Coules, D. Smith, D. Smith, 2015 .

Application of multiple analysis methods in optimising complex residual stress characterisation

D. Smith, C. Truman, G. Zheng, 2017, Experimental Techniques.

Simulating the cyclic mechanical response of titanium alloy 834 at 630°C

D. J. Smith, D. Smith, 2001 .

Synthesis of Lightweight Metallic Materials II, USA

Y. Zuo, D. Smith, A. Wisbey, 1997 .

Risk factors associated with incident sexually transmitted infections in HIV‐positive patients in the Australian HIV Observational Database: a prospective cohort study

Stephen T. Wright, K. Petoumenos, N. L. De La Mata, 2016, HIV medicine.

Prediction of the growth rate for fatigue cracks emanating from cold expanded holes

M. J. Pavier, David J. Smith, V. Lacarac, 2004 .

The effect of cold expansion on fatigue crack growth from open holes at room and high temperature

M. J. Pavier, David J. Smith, V. Lacarac, 2001 .

Creep relaxation of residual stresses around cold expanded holes

M. J. Pavier, David J. Smith, V. Lacarac, 2001 .

Statistical analysis of the effects of prior load on fracture

D. Smith, J. Booker, D. Smith, 2007 .

A comparison of two- and three-dimensional fracture assessments in the presence of residual stresses

Sj Lewis, David J. Smith, Christopher E Truman, 2009 .

A statistical approach for transferring fracture events across different sample shapes

David J. Smith, Sj Lewis, Julian D Booker, 2011 .

Calibrating Weibull parameters to predict fracture in laboratory specimens of different shapes

J. Booker, D. Smith, K. Rosahl, 2010 .

Measurement and Prediction of the Residual Stress Field Generated by Side-Punching

Sayeed Hossain, Philip J. Withers, David J. Smith, 2006 .

Prediction and measurement of residual stresses in a thick section stainless steel weld

D. Smith, J. Bouchard, Dj Smith, 1997 .

WITHDRAWN: Characterising residual stresses in a dissimilar metal electron beam welded plate

A. K. Bhaduri, C. Truman, D. Smith, 2016 .

Measurement of residual stresses in large engineering components

C. Truman, D. Smith, F. Hosseinzadeh, 2007 .

Through thickness measurement of residual stresses in a stainless steel cylinder containing shallow and deep weld repairs

David J. Smith, Dbf George, D. George, 2005 .

Measurement and prediction of residual stress in a bead-on-plate weld benchmark specimen

Ej Kingston, David J. Smith, X Ficquet, 2009 .

[abstract] AN EVALUATION OF THE CLASSIFICATION OF DECOMPRESSION DISORDERS

D. Smith, R. Pethybridge, T. Francis, 1993 .

Describing Decompression Illness.

Tjr Francis, D. Smith, Dj Smith, 1991 .

Validation of Mechanical Strain Relaxation Methods for Stress Measurement

D. Smith, D. Smith, D. Smith, 2013 .

A Combined Experimental and Modelling Approach to Elastic–Plastic Crack Driving Force Calculation in the Presence of Residual Stresses

H. Coules, D. Smith, T. Pirling, 2016, Experimental Mechanics.

Type IV creep cavity accumulation and failure in steel welds

David J. Smith, Ns Walker, D. Smith, 2003 .

Creep Damage Accumulation and Failure in Narrow Regions of Steel Welds

D. Smith, D. Smith, S. Kimmins, 2001 .

An improved method to identify grain boundary creep cavitation in 316H austenitic stainless steel.

D. Smith, P. Flewitt, D. Smith, 2011, Ultramicroscopy.

Three dimensional finite element prediction of crack closure and fatigue crack growth rate for a corner crack

Martyn J Pavier, S Simandjuntak, David J. Smith, 2006 .

Advanced composite metallic laminates

D. Smith, I. Farrow, P. Partridge, 1994 .

Fracture Mechanics: Twenty-second Symposium, ASTM STP 1131

S. Garwood, D. Smith, 1992 .

The deformation and fracture of a cracked steel pressure vessel

D. Smith, J. Gordon, 1991 .