S. Schuschnigg

发表

3D print of polymer bonded rare-earth magnets, and 3D magnetic field scanning with an end-user 3D printer

I. Teliban, C. Huber, C. Abert, 2016, 1605.07309.

A Review of Multiscale Computational Methods in Polymeric Materials

Clemens Holzer, Stephan Schuschnigg, S. Schuschnigg, 2017, Polymers.

The consequences of different printing chamber temperatures in extrusion-based additive manufacturing

L. Cardon, S. Schuschnigg, F. Arbeiter, 2018 .

Polypropylene Filled With Glass Spheres in Extrusion‐Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature

L. Cardon, S. Schuschnigg, F. Arbeiter, 2018 .

Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation

J. Gonzalez-Gutierrez, C. Kukla, S. Schuschnigg, 2019, Additive Manufacturing.

Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives

J. Gonzalez-Gutierrez, C. Kukla, S. Schuschnigg, 2018, Materials.

Powder content in powder extrusion moulding of tool steel: Dimensional stability, shrinkage and hardness

J. Gonzalez-Gutierrez, D. Handl, C. Kukla, 2021 .

Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication

J. Gonzalez-Gutierrez, C. Kukla, S. Schuschnigg, 2020, Materials.

Application and Development of Simulation Software in Polymer Processing

W. Friesenbichler, S. Schuschnigg, C. Holzer, 2013, BHM Berg- und Hüttenmännische Monatshefte.

Research Progress on Low-Pressure Powder Injection Molding

J. Gonzalez-Gutierrez, S. Schuschnigg, C. Holzer, 2022, Materials.

Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components

J. Gonzalez-Gutierrez, E. Neubauer, W. Lengauer, 2019, International Journal of Refractory Metals and Hard Materials.

Orientation of Anisometric Layered Silicate Particles in Uncompatibilized and Compatibilized Polymer Melts Under Shear Flow: A Dissipative Particle Dynamics Study

S. Schuschnigg, C. Holzer, A. Gooneie, 2016 .

Effect of the printing bed temperature on the adhesion of parts produced by fused filament fabrication

Clemens Holzer, Stephan Schuschnigg, Joamin Gonzalez-Gutierrez, 2018 .

Rheological properties of wood polymer composites and their role in extrusion

S. Schuschnigg, C. Holzer, G. Langecker, 2015 .

Coupled Orientation and Stretching of Chains in Mesoscale Models of Polydisperse Linear Polymers in Startup of Steady Shear Flow Simulations

S. Schuschnigg, C. Holzer, A. Gooneie, 2016 .

3D Printing of Polymer-Bonded Rare-Earth Magnets With a Variable Magnetic Compound Fraction for a Predefined Stray Field

I. Teliban, C. Huber, D. Suess, 2017, Scientific Reports.

Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing

L. Cardon, H. Cajner, J. Gonzalez-Gutierrez, 2018, Polymers.

Effect of metal particle size and powder volume fraction on the filling performance of powder injection moulded parts with a microtextured surface

M. Suvanto, J. Gonzalez-Gutierrez, C. Kukla, 2021 .

Polymer-bonded anisotropic SrFe12O19filaments for fused filament fabrication

I. Teliban, C. Huber, D. Suess, 2019, Journal of Applied Physics.

In-situ alignment of 3D printed anisotropic hard magnets

S. Kobe, I. Teliban, C. Huber, 2022, Scientific Reports.

Novel Additive Manufacturing Materials for Waste Heat Deduction

Christian Gorsche, S. Schuschnigg, E. Kroke, 2022, Advanced Engineering Materials.

Modeling and Estimation of the Pressure and Temperature dependent Bulk Density of Polymers

C. Kneidinger, J. Miethlinger, S. Schuschnigg, 2020 .

Influence of Binder Composition and Material Extrusion (MEX) Parameters on the 3D Printing of Highly Filled Copper Feedstocks

F. Nanni, J. Gonzalez-Gutierrez, S. Schuschnigg, 2022, Polymers.

Multifunctional Ti_3AlC_2-Based Composites via Fused Filament Fabrication and 3D Printing Technology

Dong Liu, G. Sui, S. Schuschnigg, 2023, Journal of Materials Engineering and Performance.

Debinding behaviour of feedstock for material extrusion additive manufacturing of zirconia

J. Gonzalez-Gutierrez, C. Kukla, S. Schuschnigg, 2019, Powder Metallurgy.

Optimization of material properties for highly-filled thermoplastic polymers used in fused filament fabrication of ceramics

H. Cajner, J. Gonzalez-Gutierrez, C. Kukla, 2019 .

Optimization of Twin Screw Extrusion using CFD for Polymer/Nanoclay Composites

W. Friesenbichler, S. Schuschnigg, C. Holzer, 2015 .

Dissipative Particle Dynamics Models of Orientation of Weakly‐Interacting Anisometric Silicate Particles in Polymer Melts under Shear Flow: Comparison with the Standard Orientation Models

S. Schuschnigg, C. Holzer, A. Gooneie, 2016 .

Effects of Different Polypropylene (PP)-Backbones in Aluminium Feedstock for Fused Filament Fabrication (FFF)

J. Gonzalez-Gutierrez, S. Schuschnigg, C. Holzer, 2023, Polymers.

Enhancing High-Pressure Capillary Rheometer Viscosity Data Calculation with the Propagation of Uncertainties for Subsequent Cross-Williams, Landel, and Ferry (WLF) Parameter Fitting

S. Schuschnigg, C. Holzer, J. Groten, 2023, Polymers.

Comparative analysis of binder systems in copper feedstocks for metal extrusion additive manufacturing and metal injection moulding

J. Gonzalez-Gutierrez, S. Schuschnigg, C. Holzer, 2024, Journal of Materials Research and Technology.