Linjie Zhao

发表

Effect of scratches on the damage characteristics of fused silica optics under extremely-high impact load

Zhichao Liu, Qiao Xu, Jian Cheng, 2022, International Journal of Mechanical Sciences.

Formation mechanism of surface morphology in the process of CO2 pulsed laser processing of fused silica optics

Wei Liao, Qi Liu, Jian Cheng, 2021 .

Formation mechanism of bubbles in the crack healing process of fused silica using a CO2 laser.

Zhichao Liu, Qiao Xu, Jian Cheng, 2021, Optics express.

Experimental and theoretical investigation of localized CO2 laser interaction with fused silica during the process of surface damage mitigation

Wei Liao, Chunya Wu, Qi Liu, 2020 .

Development of Integrated Multi-Station System to Precisely Detect and Mitigate Surface Damage on Fused Silica Optics

Wei Liao, Hai-jun Wang, Xiaodong Yuan, 2020 .

Optical modulation of repaired damage site on fused silica produced by CO2 laser rapid ablation mitigation

Wei Liao, Qi Liu, Jian Cheng, 2020 .

Application of light diffraction theory to qualify the downstream light field modulation property of mitigated KDP crystals

Zhichao Liu, Qi Liu, Jian Cheng, 2020, Optics & Laser Technology.

Dynamic behavior modeling of laser-induced damage initiated by surface defects on KDP crystals under nanosecond laser irradiation

Zhichao Liu, Qi Liu, Jian Cheng, 2020, Scientific Reports.

Model Development for Nanosecond Laser-Induced Damage Caused by Manufacturing-Induced Defects on Potassium Dihydrogen Phosphate Crystals

Zhichao Liu, Qi Liu, Jian Cheng, 2020, ACS omega.

Characterization of manufacturing-induced surface scratches and their effect on laser damage resistance performance of diamond fly-cut KDP crystal

Jiubin Tan, Zhichao Liu, H. Liu, 2019 .

Incident laser modulation by tool marks on micro-milled KDP crystal surface: Numerical simulation and experimental verification

Z. Liao, Qi Liu, Jian Cheng, 2019, Optics & Laser Technology.

Modeling of residual tool mark formation and its influence on the optical performance of KH2PO4 optics repaired by micro-milling

Qi Liu, Jian Cheng, Linjie Zhao, 2019, Optical Materials Express.

Effect of surface scallop tool marks generated in micro-milling repairing process on the optical performance of potassium dihydrogen phosphate crystal

Jiubin Tan, Wei Liao, Xiaodong Yuan, 2018, Materials & Design (1980-2015).

Potential damage threats to downstream optics caused by Gaussian mitigation pits on rear KDP surface

Zhichao Liu, Qi Liu, Jian Cheng, 2020, High Power Laser Science and Engineering.

Secondary peak of downstream light field modulation caused by Gaussian mitigation pits on the rear KDP surface.

Zhichao Liu, Qi Liu, Jian Cheng, 2020, Optics express.

Heat accumulation effect during CO2 laser processing of fused silica optics

Mingjun Chen, Jian Cheng, Linjie Zhao, 2022, Results in Physics.

Morphology evolution mechanisms and localized structural modification of repaired sites on fused silica optics processed by CO2 laser rapid ablation mitigation

Qi Liu, Jian Cheng, Linjie Zhao, 2022, Optics & Laser Technology.

Physical mechanism of pulsed laser interaction with fused silica optics during CO2 laser mitigation process

Wei Liao, Qi Liu, Jian Cheng, 2021 .

Laser damage evolution by defects on diamond fly-cutting KDP surfaces

Zhichao Liu, H. Liu, Qiao Xu, 2022, International Journal of Mechanical Sciences.

Surface damage evolution of KDP crystals induced by conical cracks under irradiation of nanosecond laser

Zhichao Liu, Qi Liu, Jian Cheng, 2021, Laser Damage.

An Overview of Laser Metal Deposition for Cladding: Defect Formation Mechanisms, Defect Suppression Methods and Performance Improvements of Laser-Cladded Layers

H. Liu, Jian Cheng, Linjie Zhao, 2022, Materials.

Diffusion process of an ink drop in core–shell silica–titania pigment particles

B. Jiang, Linjie Zhao, Yuewu Huang, 2016 .

Particle simulation of the initial dynamic damage behaviors of KDP crystals under intense laser irradiation

Zhichao Liu, Qi Liu, Jian Cheng, 2021, Laser Damage.

Formation mechanism of a smooth, defect-free surface of fused silica optics using rapid CO2 laser polishing

Xiaodong Yuan, Jian Cheng, Mingjun Chen, 2019, International Journal of Extreme Manufacturing.

Toward little heat-affected area of fused silica materials using short pulse and high power CO2 laser

Wei Liao, Xiaodong Yuan, Qi Liu, 2019, Results in Physics.

Effect of Pre-Existing Micro-Defects on Cutting Force and Machined Surface Quality Involved in the Ball-End Milling Repairing of Flawed KDP Crystal Surfaces

Qi Liu, Jian Cheng, Linjie Zhao, 2022, Materials.

Relationship between the photoluminescence envelope area of surface defects and the laser-induced damage thresholds of mechanically machined fused silica optical surfaces

Zhichao Liu, H. Liu, Jian Cheng, 2023, Ceramics International.

Research on the light intensity modulation and characterizing methods of surface texture on KDP optics generated in fly-cutting and micro ball-end milling processes

Xichun Luo, Z. Liao, Qi Liu, 2023, CIRP Journal of Manufacturing Science and Technology.

Determination of intrinsic defects of functional KDP crystals with flawed surfaces and their effect on the optical properties.

Zhichao Liu, Qiao Xu, Jian Cheng, 2022, Nanoscale.

Fractal Analysis on Machined Surface Morphologies of Soft-Brittle KDP Crystals Processed by Micro Ball-End Milling

Ming Liu, Z. Liao, Qi Liu, 2023, Materials.

Mechanisms of the sharp decrease of the LIDT from the plastic surface defect to the brittle surface defect on optical surface

Zhichao Liu, H. Liu, Jian Cheng, 2023, Applied Surface Science.

Research on precision automatic tool setting technology for KDP crystal surface damage mitigation based on machine vision

Xiaodong Yuan, Jian Cheng, Linjie Zhao, 2021 .

Initial energy deposition and initiation mechanism of nanosecond laser damage caused by KDP surface micro-defects

Zhichao Liu, Qi Liu, Jian Cheng, 2021, 2109.02784.

Rapid CO2 laser processing technique for fabrication of micro-optics and micro-structures on fused silica materials

Wei Liao, Xiaodong Yuan, Qi Liu, 2020, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.

Dynamic behavior modeling of laser-induced damage initiated by surface defects on KDP crystals under nanosecond laser irradiation

Zhichao Liu, Qi Liu, Jian Cheng, 2020, Scientific Reports.

Transient dynamic behavior during nanosecond laser-induced damage initiated by surface defects on KDP crystals with simulation and experimental method

Jian Wang, Hao Yang, Qi Liu, 2019, SPIE/SIOM Pacific Rim Laser Damage.

Role of fictive temperature distribution involved in CO2 laser polishing of fused silica and its optimization for achieving even heat-affected zones

Wei Liao, Linjie Zhao, Zhaoyang Yin, 2024, Applied Surface Science.