Junzong Feng

发表

Thermal conductivity of low density carbon aerogels

Chang-rui Zhang, Junzong Feng, Jian Feng, 2012, Journal of Porous Materials.

Nanostructure evolution of silica aerogels under rapid heating from 600 °C to 1300 °C via in-situ TEM observation

Sizhao Zhang, Junzong Feng, Jian Feng, 2020 .

Self-Sacrificial Salt Templating: Simple Auxiliary Control over the Nanoporous Structure of Porous Carbon Monoliths Prepared through the Solvothermal Route

Ping Liu, X. Chen, Zhen Zhang, 2018, Nanomaterials.

High-pressure salt templating strategy toward intact isochoric hierarchically porous carbon monoliths from ionic liquids

Junzong Feng, Jian Feng, Yonggang Jiang, 2017 .

Synthesis of fibre reinforced Al2O3−SiO2 aerogel composite with high density uniformity via a facile high-pressure impregnation approach

Sizhao Zhang, Junzong Feng, Jian Feng, 2017 .

Synthesis and characterization of ambient-dried microglass fibers/silica aerogel nanocomposites with low thermal conductivity

Junzong Feng, Jian Feng, Yonggang Jiang, 2017, Journal of Sol-Gel Science and Technology.

High absorption efficiency by high intensity laser irradiating carbon aerogel targets

Peng Han, Junzong Feng, Guobo Zhang, 2022, Physics of Plasmas.

Sintering behavior of SiO2 aerogel composites reinforced by mullite fibers via in-situ rapid heating TEM observations

Sizhao Zhang, Junzong Feng, Jian Feng, 2020 .

Preparation of monodispersed silica sol with small particle size, narrow size distribution, and high conversion

Junzong Feng, Jian Feng, Huafei Cai, 2019, Journal of Sol-Gel Science and Technology.

Polyvinylmethyldimethoxysilane reinforced methyltrimethoxysilane based silica aerogels for thermal insulation with super-high specific surface area

Junzong Feng, Jian Feng, Yonggang Jiang, 2019 .

Room Temperature Oxalic Acid‐Catalyzed, Ambient Pressure Dried, and Cost‐Effective Synthesis of Polybenzoxazine Aerogels for Thermal Insulation

Sizhao Zhang, Junzong Feng, Jian Feng, 2020, Advanced Engineering Materials.

Facile fabrication of hydrophobic polyvinylpolysilsesquioxane aerogels with improved optical properties

Sizhao Zhang, Junzong Feng, Jian Feng, 2019, Journal of Sol-Gel Science and Technology.

Elastic methyltrimethoxysilane based silica aerogels reinforced with polyvinylmethyldimethoxysilane

Junzong Feng, Jian Feng, Yonggang Jiang, 2019, RSC advances.

Thermal conductivity of polyvinylpolymethylsiloxane aerogels with high specific surface area

Junzong Feng, Jian Feng, Yonggang Jiang, 2019, RSC advances.

Thermally insulating polybenzoxazine aerogels based on 4,4′-diamino-diphenylmethane benzoxazine

Sizhao Zhang, Junzong Feng, Jian Feng, 2019, Journal of Materials Science.

Carbon fiber reinforced carbon aerogel composites for thermal insulation prepared by soft reinforcement

Chang-rui Zhang, Junzong Feng, Jian Feng, 2012 .

Carbon aerogel composites prepared by ambient drying and using oxidized polyacrylonitrile fibers as reinforcements.

N. Zhao, Chang-rui Zhang, Junzong Feng, 2011, ACS applied materials & interfaces.

Study on the solid thermal insulation mechanisms of nitrogen-doped graphene aerogels by molecular dynamics simulations and experiments

Junzong Feng, Jian Feng, Chenwu Yue, 2018, International Journal of Thermal Sciences.

Oxidation-mediated chitosan as additives for creation of chitosan aerogels with diverse three-dimensional interconnected skeletons

Sizhao Zhang, Junzong Feng, Jian Feng, 2017 .

Efficient gaseous thermal insulation aerogels from 2-dimension nitrogen-doped graphene sheets

Junzong Feng, Jian Feng, Chenwu Yue, 2017 .

Facile synthesis of silica aerogel composites via ambient-pressure drying without surface modification or solvent exchange

Junzong Feng, Jian Feng, Yonggang Jiang, 2020 .

Formation of enhanced gelatum using ethanol/water binary medium for fabricating chitosan aerogels with high specific surface area

Sizhao Zhang, Junzong Feng, Jian Feng, 2017 .

Synthesis of white cement bonded porous fumed silica-based composite for thermal insulation with low thermal conductivity via a facile cast-in-place approach

Junzong Feng, Jian Feng, Yonggang Jiang, 2019, Construction and Building Materials.

Highly Stable Nanocarbon Supported Pt Catalyst for Fuel Cell Via a Molten Salt Graphitization Strategy

Junzong Feng, Jian Feng, Yonggang Jiang, 2022, SSRN Electronic Journal.

Inhibited radiation transmittance and enhanced thermal stability of silica aerogels under very-high temperature

Junzong Feng, Jian Feng, Huafei Cai, 2021, Ceramics International.

Preparation of silica aerogels with high temperature resistance and low thermal conductivity by monodispersed silica sol

Sizhao Zhang, Junzong Feng, Jian Feng, 2020 .

Carbon aerogels by pyrolysis of TEMPO-oxidized cellulose

Sizhao Zhang, Junzong Feng, Jian Feng, 2018 .

Ultra-low shrinkage chitosan aerogels trussed with polyvinyl alcohol

Sizhao Zhang, Junzong Feng, Jian Feng, 2018, Materials & Design.

Preparation and Properties of SiBCO Aerogel and Its Composites

Jie Yin, Junzong Feng, Jian Feng, 2018, Nanomaterials.

Structure, compression and thermally insulating properties of cellulose diacetate-based aerogels

Sizhao Zhang, Fangwei Qi, Junzong Feng, 2020 .

Synthesis, structure, and properties of silicon oxycarbide aerogels derived from tetraethylortosilicate /polydimethylsiloxane

Junzong Feng, Jian Feng, Yonggang Jiang, 2015 .

Preparation of a carbon fibre-reinforced carbon aerogel and its application as a high-temperature thermal insulator

Junzong Feng, Jian Feng, Yonggang Jiang, 2022, RSC advances.

Facile synthesis of monolithic hierarchical porous carbon materials via molten salt method

Junzong Feng, Jian Feng, Yonggang Jiang, 2018, Monatshefte für Chemie - Chemical Monthly.

Preparation and properties of PAN-based carbon fiber-reinforced SiCO aerogel composites

Junzong Feng, Jian Feng, Yonggang Jiang, 2019, Ceramics International.

A Stabilization Synthesis Strategy for Atomically Dispersed Metal-N4 Electrocatalysts Via Aerogel Confinement and Ammonia Pyrolyzing

Y. Lei, Yongting Chen, Junzong Feng, 2022, SSRN Electronic Journal.

Ultralow density carbon aerogels with low thermal conductivity up to 2000 °C

Chang-rui Zhang, Junzong Feng, Jian Feng, 2011 .

Novel silica-modified boehmite aerogels and fiber-reinforced insulation composites with ultra-high thermal stability and low thermal conductivity

Junzong Feng, Jian Feng, Yonggang Jiang, 2022, Journal of the European Ceramic Society.

Effect of Heat-Treatment on the Microstructure and Properties of SiO2-TiO2 Aerogels Synthesized via Supercritical Drying

Yanli Qin, Junzong Feng, Jian Feng, 2016 .

Infrared-opacified Al2O3–SiO2 aerogel composites reinforced by SiC-coated mullite fibers for thermal insulations

Junzong Feng, Jian Feng, Chenwu Yue, 2015 .

Hierarchically porous carbon aerogels with high specific surface area prepared from ionic liquids via salt templating method

Zhen Zhang, Junzong Feng, Jian Feng, 2018 .

In situ co‐polymerization of high‐performance polybenzoxazine/silica aerogels for flame‐retardancy and thermal insulation

Sizhao Zhang, Junzong Feng, Jian Feng, 2020 .

Synthesis of Aliphatic Polycarbonates from Diphenyl Carbonate and Diols over Zinc (II) Acetylacetonate

Junzong Feng, Ziqing Wang, Jianjiang Feng, 2022, Molecules.

Influence of Ethyl Acetoacetate on the Structure and Thermal Stability of Alumina Aerogel

Junzong Feng, Jian Feng, Yong Jiang, 2015 .

Research Progress on Alumina Aerogel Composites for High-temperature Thermal Insulation

Junzong Feng, Jian Feng, F. Peng, 2021, Journal of Inorganic Materials.

Anti-oxidation performance of carbon aerogel composites with SiCO ceramic inner coating

Junzong Feng, Jian Feng, Yonggang Jiang, 2019, Ceramics International.

Thermal conductivities of cellulose diacetate based aerogels

Sizhao Zhang, Fangwei Qi, Junzong Feng, 2020, Cellulose.

Three-Dimensional-Printed Silica Aerogels for Thermal Insulation by Directly Writing Temperature-Induced Solidifiable Inks.

Yifei Luo, Junzong Feng, Jian Feng, 2021, ACS applied materials & interfaces.

Fiber-Reinforced Alumina-Carbon Core-Shell Aerogel Composite with Heat-Induced Gradient Structure for Thermal Protection up to 1800 ℃

Junzong Feng, Jian Feng, Yonggang Jiang, 2023, Chemical Engineering Journal.

Thermally insulating, fiber-reinforced alumina–silica aerogel composites with ultra-low shrinkage up to 1500 °C

Junzong Feng, Jian Feng, Huafei Cai, 2021 .

Ultraviolet-assisted direct-write printing strategy towards polyorganosiloxane-based aerogels with freeform geometry and outstanding thermal insulation performance

X. Wang, Junzong Feng, Jian Feng, 2023, Chemical Engineering Journal.

Printed aerogels: chemistry, processing, and applications.

Chao Gao, B. Su, T. Hasan, 2021, Chemical Society reviews.

Study on Thermal Conductivities of Aromatic Polyimide Aerogels.

Junzong Feng, Jian Feng, Yonggang Jiang, 2016, ACS applied materials & interfaces.

Low-thermal-conductivity nitrogen-doped graphene aerogels for thermal insulation

Junzong Feng, Jian Feng, Chenwu Yue, 2016 .

Preparation and properties of TaSi2-MoSi2-ZrO2-borosilicate glass coating on porous SiCO ceramic composites for thermal protection

Junzong Feng, Jian Feng, Hao Lin, 2018, Ceramics International.

Preparation and anti-oxidation performance of Al2O3-containing TaSi2–MoSi2–borosilicate glass coating on porous SiCO ceramic composites for thermal protection

Junzong Feng, Jian Feng, Hao Lin, 2018, RSC advances.

Preparation and properties of the multi-layer aerogel thermal insulation composites

Junzong Feng, Jian Feng, Yonggang Jiang, 2018 .

Carbon Layer Encapsulation Strategy for Designing Multifunctional Core-Shell Nanorod Aerogels as High-Temperature Thermal Superinsulators

Junzong Feng, Jian Feng, Yonggang Jiang, 2022, Chemical Engineering Journal.

Effects of Carbonization Temperature on Mechanical and Thermal Insulation Properties of Carbon Aerogel Composites using Phenolic Fibers as Reinforcement

Junzong Feng, Jian Feng, Yonggang Jiang, 2023, Journal of Nanomaterials.

A facile method to fabricate monolithic alumina–silica aerogels with high surface areas and good mechanical properties

Junzong Feng, Jian Feng, F. Peng, 2020, Journal of the European Ceramic Society.

Foreign element doping and thermal stability of alumina aerogels

Junzong Feng, Jian Feng, Yonggang Jiang, 2021, Journal of the American Ceramic Society.

Influence of acid-base catalysis on the textural and thermal properties of carbon aerogel monoliths

Junzong Feng, Jian Feng, Zichun Yang, 2020 .

Controlling the microstructure of resorcinol–furfural aerogels and derived carbon aerogels via the salt templating approach

Junzong Feng, Jian Feng, Yonggang Jiang, 2019, RSC advances.

Mechanical Properties of Aerogel-Ceramic Fiber Composites

Yong Jiang, Chang-rui Zhang, Junzong Feng, 2010 .

Versatile Thermal‐Solidifying Direct‐Write Assembly towards Heat‐Resistant 3D‐Printed Ceramic Aerogels for Thermal Insulation

Junzong Feng, Jian Feng, Yonggang Jiang, 2022, Small methods.

Shrinkage and pore structure in preparation of carbon aerogels

Chang-rui Zhang, Junzong Feng, Jian Feng, 2011 .

Facile Preparation of High Strength Silica Aerogel Composites via a Water Solvent System and Ambient Pressure Drying without Surface Modification or Solvent Replacement

Junzong Feng, Jian Feng, Yonggang Jiang, 2021, Materials.

Thermal Insulation Characteristics of Polybenzoxazine Aerogels

Sizhao Zhang, Junzong Feng, Jian Feng, 2019, Macromolecular Materials and Engineering.

Preparation and properties of the multi-layer aerogel thermal insulation composites

Junzong Feng, Jian Feng, Yonggang Jiang, 2018, Heat and Mass Transfer.

High‐Temperature Mechanical Properties of Silica Aerogel Composites Reinforced by Mullite Fibers

Junzong Feng, Jian Feng, Yonggang Jiang, 2017 .

Mn–N3–O-Loaded Graphitic Carbon Aerogel for an Efficient Oxygen Reduction Reaction

Yongting Chen, Junzong Feng, Jian Feng, 2023, ACS Sustainable Chemistry & Engineering.

Lightweight, strong and thermally insulating polymethylsilsesquioxane- polybenzoxazine aerogels by ambient pressure drying

Sizhao Zhang, Junzong Feng, Jian Feng, 2021, Journal of Sol-Gel Science and Technology.

Compressible, Flame-Resistant and Thermally Insulating Fiber-Reinforced Polybenzoxazine Aerogel Composites

Sizhao Zhang, Junzong Feng, Jian Feng, 2020, Materials.

Bionic Aerogel with a Lotus Leaf-like Structure for Efficient Oil-Water Separation and Electromagnetic Interference Shielding

Junzong Feng, Jian Feng, Yonggang Jiang, 2023, Gels.

Accessible mesoporous carbon aerogel preparation and its application as ultra-low pt support for oxygen reduction reaction with high catalytic activity

Yi Luo, Junzong Feng, Jian Feng, 2021, Journal of Porous Materials.

Ultralow Thermal Conductivity of Single-Atom Doped Carbon Aerogel Synthesized with a Facile Ambient-Pressure-Drying Strategy

G. Qin, Junzong Feng, Jian Feng, 2023, SSRN Electronic Journal.

Non-silica fiber and enabled stratified fiber doping for high temperature aerogel insulation

Junzong Feng, Jian Feng, Yonggang Jiang, 2020 .

Thermal conductivity of aerogel composites with oriented nitrogen-doped graphene

Junzong Feng, Jian Feng, Chenwu Yue, 2017 .

Ultralight elastic Al2O3 nanorod-graphene aerogel for pressure sensing and thermal superinsulation

Junzong Feng, Jian Feng, Yonggang Jiang, 2023, RSC advances.

Ultralight Ceramic Fiber Aerogel for High-Temperature Thermal Superinsulation

Junzong Feng, Jian Feng, Yonggang Jiang, 2023, Nanomaterials.

Mechanical and thermal insulation properties of carbon fibre-reinforced carbon aerogel composites

Junzong Feng, Jian Feng, Yonggang Jiang, 2022, Advances in Applied Ceramics: Structural, Functional and Bioceramics.

Dual template strategy to prepare ultralight and high-temperature resistant ceramic nanorod aerogels for efficient thermal insulation

Junzong Feng, Jian Feng, Yonggang Jiang, 2023, Ceramics International.

Ultralow-density and high-strength graphene aerogels composites for thermal insulation

Junzong Feng, Jian Feng, Chenwu Yue, 2017 .

Hydrothermal assisted synthesis of heat resistant, well-crystallized aerogels constructed by boehmite nano rods

Junzong Feng, Jian Feng, Yonggang Jiang, 2022, Ceramics International.

Extrusion 3D printing of carbon nanotube-assembled carbon aerogel nanocomposites with high electrical conductivity

Junzong Feng, Jian Feng, Yonggang Jiang, 2023, Nano Materials Science.

Boosting the Performance of Low-Platinum Fuel Cells via a Hierarchical and Interconnected Porous Carbon Support.

Junzong Feng, Jian Feng, Teng Chen, 2024, ACS applied materials & interfaces.

Chemical activation and catalytic graphitization enable a durable and active Pt/C for low platinum fuel cell

Junzong Feng, Jian Feng, Yonggang Jiang, 2024, International Journal of Hydrogen Energy.