J. Ferguson

发表

Strong, Light, Multifunctional Fibers of Carbon Nanotubes with Ultrahigh Conductivity

Y. Cohen, D. Tsentalovich, M. Pasquali, 2013, Science.

On the strength and strain to failure in particle-reinforced magnesium metal-matrix nanocomposites (Mg MMNCs)

Kyu C. Cho, Chang-soo Kim, P. Rohatgi, 2012 .

Correlation vs. Causation: The Effects of Ultrasonic Melt Treatment on Cast Metal Grain Size

Kyu C. Cho, P. Rohatgi, J. Ferguson, 2014 .

Zinc alloy ZA-8/shape memory alloy self-healing metal matrix composite

P. Rohatgi, J. Ferguson, B. Schultz, 2015 .

Strengthening mechanisms of graphene- and Al2O3-reinforced aluminum nanocomposites synthesized by room temperature milling

Kyu C. Cho, Chang-soo Kim, P. Rohatgi, 2016 .

Reactive stir mixing of Al–Mg/Al2O3np metal matrix nanocomposites: effects of Mg and reinforcement concentration and method of reinforcement incorporation

P. Rohatgi, J. Ferguson, B. Schultz, 2014, Journal of Materials Science.

Modeling and experimental study of oil/water contact angle on biomimetic micro-parallel-patterned self-cleaning surfaces of selected alloys used in water industry

P. Rohatgi, A. Moghadam, J. Ferguson, 2015 .

Synthesis and Quasi-Static Compressive Properties of Mg-AZ91D-Al2O3 Syntactic Foams

P. Rohatgi, J. Ferguson, B. Schultz, 2015, Materials.

Al–Al2O3 syntactic foams – Part I: Effect of matrix strength and hollow sphere size on the quasi-static properties of Al-A206/Al2O3 syntactic foams

P. Rohatgi, J. Ferguson, B. Schultz, 2013 .

Compressive properties of Al-A206/SiC and Mg-AZ91/SiC syntactic foams

N. Gupta, P. Rohatgi, J. Ferguson, 2013 .

Effect of hollow sphere size and size distribution on the quasi-static and high strain rate compressive properties of Al-A380–Al2O3 syntactic foams

N. Gupta, P. Rohatgi, J. Ferguson, 2013, Journal of Materials Science.

Electroluminescence properties of a non-conjugated polymer poly[2,5-benzoxazolediyl[2,2,2-trifluoro-1-(trifluoromethyl)-ethylidene]-5,2-benzoxazolediyl[2,5-bis(decyloxy)-1,4-phenylene]] (6FPBO-OD)

J. Ferguson, B. A. Reinhardt, B. E. Taylor, 1998 .

Room-Temperature Free-Radical-Induced Polymerization of 1,1`-(Methylenedi-1,4-phenylene)bismaleimide via a Novel Diphenylquinoxaline-Containing Hyperbranched Aromatic Polyamide

J. Baek, L. Tan, J. Ferguson, 2003 .

Oxidation products of INCONEL alloys 600 and 690 in pressurized water reactor environments and their role in intergranular stress corrosion cracking

J. Ferguson, H. Lopez, 2006 .

Direct Synthesis of Nanostructured in Situ Hybrid Aluminum Matrix Nanocomposite

P. Rohatgi, A. Moghadam, J. Ferguson, 2016 .

Prediction models for the yield strength of particle-reinforced unimodal pure magnesium (Mg) metal matrix nanocomposites (MMNCs)

Kyu C. Cho, Chang-soo Kim, P. Rohatgi, 2013, Journal of Materials Science.

Functional Metal Matrix Composites: Self-lubricating, Self-healing, and Nanocomposites-An Outlook

Pradeep K. Rohatgi, Emad Omrani, Nikhil Gupta, 2014, JOM.

In-situ reactions in hybrid aluminum alloy composites during incorporating silica sand in aluminum alloy melts

P. Rohatgi, A. Moghadam, J. Ferguson, 2016 .

Predicting Mechanical Properties of Metal Matrix Syntactic Foams Reinforced with Ceramic Spheres

P. Rohatgi, J. Ferguson, B. Schultz, 2013 .

Microstructure and hardness of Al2O3 nanoparticle reinforced Al–Mg composites fabricated by reactive wetting and stir mixing

P. Rohatgi, J. Ferguson, B. Schultz, 2011 .

DFT study on the adsorption and absorption behaviors of liquid nitrogen in the Mg nano alloys synthesized from powder metallurgy

Joon-Sang Park, Kyu C. Cho, Chang-soo Kim, 2015 .

Tensile properties of reactive stir-mixed and squeeze cast Al/CuOnp-based metal matrix nanocomposites

Kyu C. Cho, P. Rohatgi, J. Ferguson, 2014 .

Impact of Brownian motion on the particle settling in molten metals

Chang-soo Kim, P. Rohatgi, J. Ferguson, 2014, Metals and Materials International.

Brownian Motion Effects on Particle Pushing and Engulfment During Solidification in Metal-Matrix Composites

Kyu C. Cho, Chang-soo Kim, P. Rohatgi, 2014, Metallurgical and Materials Transactions A.

On the superposition of strengthening mechanisms in dispersion strengthened alloys and metal-matrix nanocomposites: Considerations of stress and energy

Kyu C. Cho, Chang-soo Kim, P. Rohatgi, 2014, Metals and Materials International.

Brownian Motion Effects on the Particle Settling and Its Application to Solidification Front in Metal Matrix Composites

Chang-soo Kim, P. Rohatgi, J. Ferguson, 2014 .

Computational and analytical prediction of the elastic modulus and yield stress in particulate-reinforced metal matrix composites

Kyu C. Cho, Chang-soo Kim, P. Rohatgi, 2014 .

Synthesis and Properties of Metal Matrix Nanocomposites (MMNCS), Syntactic Foams, Self Lubricating and Self-Healing Metals

P. Rohatgi, J. Ferguson, B. Schultz, 2013 .

Temperature Effects on the Tensile Properties of Precipitation-Hardened Al-Mg-Cu-Si Alloys

Kyu C. Cho, Chang-soo Kim, J. Ferguson, 2016 .

Revised Orowan Strengthening: Effective Interparticle Spacing and Strain Field Considerations

P. Rohatgi, J. Ferguson, B. Schultz, 2012, Metallurgical and Materials Transactions A.

Scaling law for energy bandgap and effective electron mass in graphene nano mesh

V. Varshney, A. Roy, Jonghoon Lee, 2013 .

Graded Anodic Film Morphologies for Sustainable Exploitation of Aluminium Alloys in Aerospace

G. Thompson, P. Skeldon, J. Ferguson, 2008 .

Functional Metal Matrix Composites: Self-lubricating, Self-healing, and Nanocomposites-An Outlook

N. Gupta, P. Rohatgi, E. Omrani, 2014 .

Single‐walled carbon nanotube/ultrahigh‐molecular‐weight polyethylene composites with percolation at low nanotube contents

B. Grady, J. Ferguson, D. Arthur, 2009 .

Measurement of thermal conductivity of PbTe nanocrystal coated glass fibers by the 3ω method.

Yue Wu, X. Ruan, J. Ward, 2013, Nano letters.

Thermal rectification in three-dimensional asymmetric nanostructure.

V. Varshney, A. Roy, Jonghoon Lee, 2012, Nano letters.

Self-Healing Metals and Metal Matrix Composites

P. Rohatgi, J. Ferguson, B. Schultz, 2014 .

Synthesis of Fulleride Thin Films with Ultra-low Thermal Conductivity.

D. Dudis, A. Voevodin, Jianjun Hu, 2011 .

Temperature Comparison of Looped and Vertical Carbon Nanotube Fibers during Field Emission

Peng Zhang, Steven B. Fairchild, Jeongho Park, 2018, Applied Sciences.

Impact of Volume Fraction and Size of Reinforcement Particles on the Grain Size in Metal–Matrix Micro and Nanocomposites

Kyu C. Cho, Chang-soo Kim, P. Rohatgi, 2014, Metallurgical and Materials Transactions A.

Photoconducting properties of a ladder polymer

K. S. Narayan, J. Ferguson, R. Spry, 1995 .

Semi-empirical model of deposit size and porosity in 420 stainless steel and 4140 steel using laser engineered net shaping

Pradeep K. Rohatgi, Afsaneh Dorri Moghadam, P. Rohatgi, 2015 .

Multidimensional nanoscopic approaches to new thermoelectric materials

D. Dudis, J. Ferguson, Joel E. Schmidt, 2010, Defense + Commercial Sensing.

Studying the applicability of amorphous metal alloys as interface material for power electronics packaging

S. Ganguli, Anisha Roy, J. Ferguson, 2021 .

Effect of Cu, Zn, and Mg Concentration on Heat Treating Behavior of Squeeze Cast Al-(10 to 12)Zn-(3.0 to 3.4)Mg-(0.8 to 1)Cu

P. Rohatgi, J. Ferguson, B. Schultz, 2014 .

Combined Modeling and Experimental Approach to Improve Mechanical Impact Survivability of GaN Power FET

A. Roy, A. Schrand, S. Sihn, 2018, Fracture, Fatigue, Failure and Damage Evolution, Volume 6.

Morphology dependent field emission of acid-spun carbon nanotube fibers

P. T. Murray, M. A. Lange, J. Boeckl, 2015, Nanotechnology.