J. Chaix

发表

Microwave sinter forging of alumina powder

D. Bouvard, C. Carry, V. Delobelle, 2015 .

Characterization and Simulation of Microstructure and Properties of EPS Lightweight Concrete

Gilles Peix, D. Quenard, Rémy Dendievel, 2007 .

Copper extrusion 3D printing using metal injection moulding feedstock: Analysis of process parameters for green density and surface roughness optimization

Gurminder Singh, D. Bouvard, J. Missiaen, 2020 .

Elaboration of (Steel/Cemented Carbide) Multimaterial by Powder Metallurgy

J. Chaix, S. Lay, C. Pascal, 2007 .

Microstructures induced by a stress gradient in a nickel-based superalloy

J. Buffière, J. Chaix, M. Ignat, 1993 .

Ostwald ripening growth rate for nonideal systems with significant mutual solubility—I. Binary systems

J. Chaix, C. Allibert, N. Eustathopoulos, 1986 .

Ostwald ripening growth rate for nonideal systems with significant mutual solubility—II. Ternary systems. Application to liquid phase sintering of WNiCr

J. Chaix, C. Allibert, 1986 .

Computer Study of Microstructure Formation by Rearrangement During Liquid Phase Sintering

Christophe L. Martin, J. Chaix, S. M. Lee, 1999 .

Microwave Sintering of Ceramics

J. Chaix, 2021, Encyclopedia of Materials: Technical Ceramics and Glasses.

Effect of Electric Current on SPS Densification of Spherical Copper Powder

F. Charlot, S. Le Gallet, J. Chaix, 2021, Journal of Manufacturing and Materials Processing.

Densification and microstructure changes of micron size nickel powder during direct induction sintering

D. Bouvard, C. Carry, J. Chaix, 2014 .

Design of multimaterial processed by powder metallurgy: Processing of a (steel/cemented carbides) bilayer material

J. Chaix, C. Pascal, C. Allibert, 2009 .

Direct microwave sintering of pure alumina in a single mode cavity: Grain size and phase transformation effects

D. Bouvard, S. Marinel, C. Carry, 2016 .

Development of an instrumented and automated single mode cavity for ceramic microwave sintering: Application to an alpha pure alumina powder

D. Bouvard, C. Carry, J. Croquesel, 2015 .

Investigation on the chemical reactions affecting the sinterability and oxide content of Cu–Cr composites during the solid state sintering process

J. Missiaen, J. Chaix, E. Rigal, 2017 .

Spark plasma sintering microscopic mechanisms of metallic systems: Experiments and simulations

J. Monchoux, A. Couret, G. Fantozzi, 2018, Journal of the American Ceramic Society.

Theoretical and experimental investigations of local overheating at particle contacts in spark plasma sintering

J. Monchoux, J. Chaix, L. Durand, 2017 .

Flash sintering incubation in Al2O3/TZP composites

C. Carry, J. Chaix, M. Steil, 2015 .

Flash sintering of cationic conductive ceramics: A way to build multilayer systems

R. Bouchet, D. Bouvard, J. Chaix, 2021 .

Direct microwave sintering of alumina in a single mode cavity: Magnesium doping effects

D. Bouvard, C. Carry, J. Croquesel, 2017 .

Investigation on pressureless cosintering behaviour of Hadfield steel/cemented carbide bimaterials

J. Chaix, C. Pascal, A. Antoni-Zdziobek, 2012 .

Co-sintering and microstructural characterization of steel/cobalt base alloy bimaterials

J. Chaix, C. Pascal, A. Antoni-Zdziobek, 2012, Journal of Materials Science.

Interface Reactivity and Induced Phenomena during Sintering in a Model Steel/Cemented Carbide Bimaterial

J. Chaix, C. Pascal, A. Thomazic, 2011 .

Electrochemical Flash Sintering: A New Tool to Obtain All Solid-State Batteries in Few Seconds

R. Bouchet, D. Bouvard, J. Chaix, 2020 .

Oxide reduction effects in SPS processing of Cu atomized powder containing oxide inclusions

F. Charlot, J. Chaix, R. Collet, 2016 .

Cyclic oxidation and wear of tungsten rods in contact with glass in atmospheric air

Y. Bréchet, J. Chaix, L. Boulangé, 2010, Journal of Materials Science.

LOCAL STUDY OF DEFECTS DURING SINTERING OF UO2: IMAGE PROCESSING AND QUANTITATIVE ANALYSIS TOOLS

F. Valdivieso, J. Chaix, P. Goeuriot, 2011 .

Sintering with Heterogeneities - Characterization and Modelling of the Microstructural Evolution

F. Valdivieso, J. Chaix, P. Goeuriot, 2004 .

Thermodynamic Guidelines for the Liquid Phase Sintering of TiB2 Cermets

C. Allibert, J. Chaix, C. Allibert, 1992 .

Copper additive manufacturing using MIM feedstock: adjustment of printing, debinding, and sintering parameters for processing dense and defectless parts

Gurminder Singh, D. Bouvard, J. Missiaen, 2021, The International Journal of Advanced Manufacturing Technology.

Image Analysis of Austenite and Carbides Coarsening in a Fe-Mo-C Steel

J. Chaix, M. Durand-Charre, P. Yang, 1996 .

Size distribution and volume fraction of T(1) phase precipitates from TEM images: Direct measurements and related correction.

T. Dorin, A. Deschamps, P. Donnadieu, 2015, Micron.

Additive manufacturing of 17–4 PH steel using metal injection molding feedstock: Analysis of 3D extrusion printing, debinding and sintering

Gurminder Singh, D. Bouvard, J. Missiaen, 2021, Additive Manufacturing.

Computer simulation code for particle growth in liquid phase sintering

J. Rodriguez, J. Chaix, J. M. Chaix, 1988 .

Direct sintering of (steel/cemented carbide) two-layer materials

J. Chaix, C. Pascal, A. Thomazic, 2007 .

On the swelling of silver powder during sintering

D. Bouvard, J. Chaix, S. Roure, 2016 .

Study by X-ray microtomography of the horizontal vibration effects on sand densification

J. Gelet, L. Olmos, J. Chaix, 2016 .

A computer method for random packing of spheres of unequal size

J. M. Chaix, J. Rodriguez, C. H. Allibert, 1986 .

Sintering mechanisms of Cu-Cr metallic composites

J. Missiaen, J. Chaix, H. Schellekens, 2017 .

Computer simulation of particle rearrangement in the presence of liquid

J. Chaix, S. Lee, C. Allibert, 1999 .

Is direct microwave heating well suited for sintering ceramics?

D. Bouvard, S. Marinel, J. Chaix, 2021 .

Study of interaction between high energy discharge and granular field in a confined environment for fuses applications

R. Dendievel, J. Gelet, G. Thomas, 2015 .

Quantitative Analysis of Microstructure and Modeling of Sintering

J. Chaix, 2009 .

Modelling the influence of process parameters on the densification of granular media under horizontal vibrations.

J. Gelet, G. Thomas, J. Chaix, 2009 .

Parametric study of horizontally vibrated grain packings-Comparison between Discrete Element Method and experimental results

J. Chaix, O. Bonnefoy, S. Nadler, 2020 .

Fabrication of bimaterial components by conventional powder metallurgy

D. Imbault, P. Dorémus, D. Bouvard, 2010 .