A. Goulas

发表

Laser sintering of ceramic materials for aeronautical and astronautical applications

R. J. Friel, A. Goulas, 2017 .

Mechanical behaviour of additively manufactured lunar regolith simulant components

Daniel S. Engstrøm, R. J. Friel, R. Harris, 2018, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.

Microstructure and microwave dielectric properties of 3D printed low loss Bi2Mo2O9 ceramics for LTCC applications

J. Vardaxoglou, D. Engstrøm, W. Whittow, 2020 .

Fused filament fabrication of functionally graded polymer composites with variable relative permittivity for microwave devices

Daniel S. Engstrøm, J. Vardaxoglou, D. Engstrøm, 2020 .

Isolation and characterization of a vitellogenin cDNA from rainbow trout (Oncorhynchus mykiss) and the complete sequence of a phosvitin coding segment.

A. Goulas, E. Triplett, G. Taborsky, 1996, DNA and cell biology.

Assessing extraterrestrial regolith material simulants for in-situ resource utilisation based 3D printing

Ross J. Friel, Jon Binner, Russell A. Harris, 2017 .

In vitro evaluation of the fermentation properties of galactooligosaccharides synthesised by α-galactosidase from Lactobacillus reuteri

G. Gibson, G. Tzortzis, R. Rastall, 2004, Applied Microbiology and Biotechnology.

Manufacturability, mechanical properties, mass-transport properties and biocompatibility of TPMS scaffolds fabricated by selective laser melting

R. Setchi, Qian Tang, Y. Tse, 2020 .

Manufacturability, Mechanical Properties, Mass-Transport Properties and Biocompatibility of Triply Periodic Minimal Surface (TPMS) Porous Scaffolds Fabricated by Selective Laser Melting

Daniel S. Engstrøm, Y. Liu, R. Setchi, 2020, Materials & Design.

Evaluation of Microwave Characterization Methods for Additively Manufactured Materials

Daniel S. Engstrøm, D. Engstrøm, W. Whittow, 2019, Designs.

A novel galactooligosaccharide mixture increases the bifidobacterial population numbers in a continuous in vitro fermentation system and in the proximal colonic contents of pigs in vivo.

G. Gibson, G. Tzortzis, A. Goulas, 2005, The Journal of nutrition.

Nutrient Metabolism A Novel Galactooligosaccharide Mixture Increases the Bifidobacterial Population Numbers in a Continuous In Vitro Fermentation System and in the Proximal Colonic Contents of Pigs In Vivo 1

G. Gibson, G. Tzortzis, A. Goulas, 2005 .

3D Antennas, Metamaterials, and Additive Manufacturing

D. Engstrøm, W. Whittow, I. Reaney, 2019, 2019 IEEE MTT-S International Wireless Symposium (IWS).

Direct ink writing of bismuth molybdate microwave dielectric ceramics

D. Engstrøm, W. Whittow, I. Reaney, 2020 .

The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites

Daniel S. Engstrøm, D. Engstrøm, W. Whittow, 2019, Designs.

Expression of four β-galactosidases from Bifidobacterium bifidum NCIMB41171 and their contribution on the hydrolysis and synthesis of galactooligosaccharides

G. Gibson, G. Tzortzis, T. Goulas, 2009, Applied Microbiology and Biotechnology.

Synthesis of isomaltooligosaccharides and oligodextrans in a recycle membrane bioreactor by the combined use of dextransucrase and dextranase.

R. Rastall, A. Grandison, A. Goulas, 2004, Biotechnology and bioengineering.

Synthesis of isomaltooligosaccharides and oligodextrans by the combined use of dextransucrase and dextranase

R. Rastall, A. Grandison, A. Goulas, 2004 .

Hot ceramic lithography of silica-based ceramic cores: The effect of process temperature on vat-photopolymierisation

Daniel S. Engstrøm, D. Engstrøm, A. Goulas, 2022, Additive Manufacturing.

Additive manufacturing of physical assets by using ceramic multicomponent extra-terrestrial materials

R. J. Friel, R. Harris, A. Goulas, 2016 .

Purification of oligosaccharides by nanofiltration

R. Rastall, A. Grandison, A. Goulas, 2002 .

Comparative analysis of four β-galactosidases from Bifidobacterium bifidum NCIMB41171: purification and biochemical characterisation

G. Gibson, G. Tzortzis, T. Goulas, 2009, Applied Microbiology and Biotechnology.

Molecular cloning and comparative analysis of four β-galactosidase genes from Bifidobacterium bifidum NCIMB41171

G. Gibson, G. Tzortzis, T. Goulas, 2007, Applied Microbiology and Biotechnology.

Functional Characteristics and Physical Properties of Spray Dried Starch Inclusion Complexes with Drugs

V. Karageorgiou, D. Petridis, A. Goulas, 2021, Starch - Stärke.

Synthesis and dielectric characterisation of a low loss BaSrTiO3/ABS ceramic/polymer composite for fused filament fabrication additive manufacturing

Daniel S. Engstrøm, J. Vardaxoglou, D. Engstrøm, 2022, Additive Manufacturing.

Additively manufactured ultra-low sintering temperature, low loss Ag2Mo2O7 ceramic substrates

Daniel S. Engstrøm, J. Vardaxoglou, D. Engstrøm, 2021 .

The effect of print speed and material aging on the mechanical properties of a self-healing nanocomposite hydrogel

Daniel S. Engstrøm, D. Engstrøm, A. Goulas, 2020 .

Multi-material additive manufacturing of low sintering temperature Bi2Mo2O9 ceramics with Ag floating electrodes by selective laser burnout

Daniel S. Engstrøm, D. Engstrøm, I. Reaney, 2020, Virtual and Physical Prototyping.

Effect of Kefiran and Milk Proteins Addition on the Rheological Behavior of Glucono-delta-Lactone Induced Milk Gels

S. Exarhopoulos, A. Goulas, K. D. Antoniou, 2016 .

Molecular cloning and comparative analysis of four β-galactosidase genes from Bifidobacterium bifidum NCIMB 41171

G. Gibson, G. Tzortzis, T. Goulas, 2007 .

Applications of Membrane Separation

A. Grandison, A. Goulas, 2008 .

Development of a process for the production and purification of α- and β-galactooligosaccharides from Bifidobacterium bifidum NCIMB 41171

G. Gibson, G. Tzortzis, A. Goulas, 2007 .

Fractionation of oligosaccharides by nanofiltration

R. Rastall, A. Grandison, A. Goulas, 2003 .

Synthesis of prebiotic galactooligosaccharides using whole cells of a novel strain, Bifidobacterium bifidum NCIMB 41171

Glenn R. Gibson, George Tzortzis, G. Gibson, 2005, Applied Microbiology and Biotechnology.

Public Perceptions of Household IoT Smart Water “Event” Meters in the UK—Implications for Urban Water Governance

P. Jeffrey, D. Goodwin, A. Goulas, 2022, Frontiers in Sustainable Cities.

Investigating the additive manufacture of extra-terrestrial materials

Ross J. Friel, Russell A. Harris, Daniel S. Engstrom, 2016 .

Additive manufacturing using space resources

Ross J. Friel, Athanasios Goulas, Daniel S. Engstrøm, 2021 .

Printability and mechanical performance of biomedical PDMS-PEEK composites developed for material extrusion.

D. Engstrøm, V. Silberschmidt, E. Mele, 2021, Journal of the mechanical behavior of biomedical materials.

3D printing with moondust

Ross J. Friel, Athanasios Goulas, R. J. Friel, 2016 .

Biodegradable Films from Kefiran-Based Cryogel Systems

S. Exarhopoulos, A. Goulas, G. Dimitreli, 2022, Macromol.

3D conformal bandpass millimeter-wave frequency selective surface with improved fields of view

M. E. de Cos Gómez, D. Engstrøm, A. Goulas, 2021, Scientific Reports.

Indium tin oxide nanowires manufactured via printing and laser irradiation

P. Conway, D. Engstrøm, D. Hutt, 2020 .

Microwave backscatter enhancement using radial anisotropy in biomimetic core-shell spheres

E. D. Finlayson, D. Engstrøm, J. Sambles, 2023, Applied Physics Letters.