M. Kaya

发表

Comparing Repaired and Undamaged Specimens Test Results of Post-Tensioned Beam to Column Connections

M. Kaya, 2015 .

Analytical modeling of post-tensioned precast beam-to-column connections

M. Kaya, A. Arslan, 2009 .

A CFD Based Application of Support Vector Regression to Determine the Optimum Smooth Twist for Wind Turbine Blades

M. Kaya, 2019, Sustainability.

Taper stacking for the aerodynamic performance of wings

M. Kaya, M. Elfarra, 2020, Aircraft Engineering and Aerospace Technology.

Investigation of the Effect of Taper Stacking Location on Drag Force for ONERA M6 Wing

M. Kaya, M. Elfarra, F. Kadioglu, 2019, AIAA Scitech 2019 Forum.

INVESTIGATION OF THE EFFECT OF TAPER STACKING LOCATION ON AERODYNAMIC LOADS FOR ONERA M6 WING AT A FIXED ANGLE OF ATTACK

M. Kaya, M. Elfarra, 2019 .

An experimental study on strengthening of masonry infilled RC frames using diagonal CFRP strips

Ö. Anıl, M. E. Kara, S. Altin, 2008 .

Effect of taper modification on the performance of NREL VI wind turbine blade for low and mid wind speeds

M. Kaya, M. Elfarra, 2019, Wind Engineering.

CFD Based Optimization of Oscillatory Wing Motion for Maximum Energy Harvesting from Wind

M. Kaya, M. Elfarra, 2018, International Journal of Renewable Energy Research.

Optimization of Aeroelastic Flapping Motion of Thin Airfoils in a Biplane Configuration for Maximum Thrust

Max F. Platzer, Ismail H. Tuncer, Mustafa Kaya, 2007 .

DETERMINATION OF SHAPED CHARGE JET CHARACTERISTICS USING A NEURAL NETWORKS MODEL BASED ON HYDROCODE SIMULATIONS

M. Kaya, O. Ayısıt, 2019 .

A Parametric CFD Study for the Effect of Taper/Twist Stacking Point Location on the Torque of NREL VI Wind Turbine Rotor Blade

M. Kaya, M. Elfarra, F. Kadioglu, 2018 .

CFD ANALYSIS OF THE EFFECT OF PARABOLIC TAPER DISTRIBUTION OF AN UNTWISTED HELICOPTER ROTOR BLADE

M. Kaya, M. Elfarra, 2018 .

Non-Sinusoidal Path Optimization of Dual Airfoils Flapping in a Biplane Configuration

M. Kaya, I. Tuncer, 2009 .

The effect of the diameter of prestressed strands providing the post-tensioned beam-to-column connections

M. Kaya, A. Arslan, 2009 .

Parallel Computation of Flows Around Flapping Airfoils in Biplane Configuration

M. Kaya, I. Tuncer, 2003 .

Estimation of electricity cost of wind energy using Monte Carlo simulations based on nonparametric and parametric probability density functions

Mustafa Kaya, Munir Ali Elfarra, M. Kaya, 2021 .

Comparison of Optimum Spline-Based Probability Density Functions to Parametric Distributions for the Wind Speed Data in Terms of Annual Energy Production

Mustafa Kaya, Munir Elfarra, M. Kaya, 2018, Energies.

Analysis of Aircraft Survivability Against Fragmenting Warhead Threat

Altan Kayran, Hüseyin Emrah Konokman, Mustafa Kaya, 2014 .

Path Optimization of Dual Airfoils Flapping in a Biplane Configuration with RSM in a Parallel Computing Environment

Ismail H. Tuncer, Mustafa Kaya, M. Kaya, 2010 .

Artificial neural network based wing planform aerodynamic optimization

M. Kaya, Tolga Pirasaci, Burak Dam, 2022, Aircraft Engineering and Aerospace Technology.

Thrust Generation Caused by Flapping Airfoils in a Biplane Configuration

Ismail H. Tuncer, Mustafa Kaya, M. Kaya, 2003 .

Optimization of Flapping Motion Parameters for Two Airfoils in a Biplane Configuration

Max F. Platzer, Ismail H. Tuncer, Mustafa Kaya, 2009 .

Nonsinusoidal Path Optimization of a Flapping Airfoil

Ismail H. Tuncer, Mustafa Kaya, M. Kaya, 2007 .

Optimization of Flapping Motion of Airfoils in Biplane Configuration for Maximum Thrust and/or Efficiency

Max F. Platzer, Ismail H. Tuncer, Mustafa Kaya, 2007 .

PATH OPTIMIZATION OF FLAPPING AIRFOILS BASED ON NURBS

Ismail H. Tuncer, Mustafa Kaya, M. Kaya, 2007 .

Numerical Investigation of 3-D Effects on Thrust Generation of Flapping Airfoils

George N. Barakos, Agis Spentzos, Ismail H. Tuncer, 2005 .

AIAC-2005-011 PATH OPTIMIZATION OF FLAPPING AIRFOILS FOR MAXIMUM THRUST BASED ON UNSTEADY VISCOUS FLOW SOLUTIONS

M. Kaya, I. Tuncer, 2005 .

Thrust and Efficiency of Propulsion by Oscillating Foils

Ismail H. Tuncer, John Young, Mustafa Kaya, 2006 .

Parallel Optimization of Flapping Airfoils in a Biplane Configuration for Maximum Thrust

Ismail H. Tuncer, Mustafa Kaya, M. Kaya, 1996 .

Optimization of Flapping Airfoils for Maximum Thrust

Ismail H. Tuncer, Mustafa Kaya, M. Kaya, 2003 .

Path Optimization of Flapping Airfoils for Maximum Thrust Based on Unsteady Viscous F

Ismail H. Tuncer, Mustafa Kaya, M. Kaya, 2005 .

A numerical simulation of the axisymmetric vortex breakdown in a tube

M. Aksel, M. Kaya, 1992 .

Effect of Anchorage Number on Behavior of Reinforced Concrete Beams Strengthened with Glass Fiber Plates

M. Kaya, Zeynel Çağdaş Kankal, 2015 .

An Experimental Study on the Dynamic Behavior of an Ultra High-Strength Concrete

S. Karadeniz, M. Kaya, A. Gunay, 2020, Applied Sciences.

A Class-E-Based Multichannel Auxiliary Power Supply With Individual Hysteresis Control

A. Watson, Ying Li, M. Kaya, 2023, IEEE Journal of Emerging and Selected Topics in Power Electronics.

A Class E-Based Multichannel Auxiliary Power Supply with Load Independent Zero-Voltage-Switching Operation

Y. Li, A. Watson, M. Kaya, 2022, 2022 IEEE Energy Conversion Congress and Exposition (ECCE).

A Push-Pull Series Connected Modular Multilevel Converter for HVDC Applications

Alessandro Costabeber, Alan Watson, Jon Clare, 2021, IEEE Transactions on Power Electronics.

Aircraft vulnerability assessment against fragmentation warhead

Altan Kayran, Hüseyin Emrah Konokman, Mustafa Kaya, 2017 .

The effects of a new selection operator on the performance of a genetic algorithm

Mustafa Kaya, M. Kaya, 2011, Appl. Math. Comput..

THE EFFECT OF THE USE OF MINERAL ADDITIVES ON EARLY AND ADVANCED AGE COMPRESSIVE STRENGTH OF HIGH STRENGTH CONCRETES

M. Kaya, Ercin Gursel, 2016 .

The effects of two new crossover operators on genetic algorithm performance

Mustafa Kaya, M. Kaya, 2011, Appl. Soft Comput..