B. Huang

发表

Microstructures and stability of retained austenite in TRIP steels

X. D. Wang, B. Huang, Y. Rong, 2006 .

Local texture of three-stage CVD SiC fibre by precession electron diffraction (PED) and XRD

Xierong Zeng, Y. Chen, B. Huang, 2014 .

Nanocrystallization and magnetic properties of Fe-30 weight percent Ni alloy by surface mechanical attrition treatment

B. Huang, Y. Rong, C. Wen, 2006 .

Microstructure development of in situ porous TiO/Cu composites

B. Huang, F. Shao, Q. Qin, 2016 .

Preparation and Wear Resistance of Aluminum Composites Reinforced with In Situ Formed TiO/Al2O3

B. Huang, Q. Qin, W. Li, 2016, Journal of Materials Engineering and Performance.

Surface Characteristics of Machined NiTi Shape Memory Alloy: The Effects of Cryogenic Cooling and Preheating Conditions

I. Jawahir, H. Karaca, Y. Kaynak, 2017, Journal of Materials Engineering and Performance.

Mechanical and electrical properties of carbon nanotube-reinforced Al2O3 nanocomposites

B. Huang, M. Umer, Y. Q. Yang, 2020, Journal of Materials Science.

On the deformation mechanism of twinning-induced plasticity steel

X. D. Wang, B. Huang, Y. Rong, 2008 .

Effect of Nitrogen on Stacking Fault Formation Probability and Mechanical Properties of Twinning-Induced Plasticity Steels

X. D. Wang, B. Huang, Y. Rong, 2008 .

A method of discrimination between stress-assisted and strain-induced martensitic transformation using atomic force microscopy

X. D. Wang, B. Huang, Y. Rong, 2007 .

Microstructure and Mechanical Properties of Microalloyed High-Strength Transformation-Induced Plasticity Steels

X. D. Wang, B. Huang, Y. Rong, 2008 .

Study of formation behavior of TiC in the Fe―Ti―C system during combustion synthesis

Junpeng Li, M. X. Zhang, B. Huang, 2011 .

Study of formation behavior of TiC ceramic obtained by self-propagating high-temperature synthesis from Al–Ti–C elemental powders

M. X. Zhang, B. Huang, M. Song, 2009 .

Fabrication of ZrC particles and its formation mechanism by self-propagating high-temperature synthesis from Fe–Zr–C elemental powders

M. X. Zhang, B. Huang, J. G. Li, 2011 .

Formation and growth mechanism of TiC terraces during self-propagating high-temperature synthesis from a FeTiC system

B. Huang, J. G. Li, Q. Hu, 2012 .

Growth of TiC octahedron obtained by self-propagating reaction

M. X. Zhang, B. Huang, M. Song, 2009 .

Bulk ultrafine binderless WC prepared by spark plasma sintering

Longxin Chen, S. Bai, B. Huang, 2006 .

In situ fabrication of TiC particulates locally reinforced aluminum matrix composites by self-propagating reaction during casting

M. X. Zhang, B. Huang, M. Song, 2008 .

In situ synthesis of ZrC particles and its formation mechanism by self-propagating reaction from Al–Zr–C elemental powders

M. X. Zhang, B. Huang, M. Song, 2009 .

Preparation and mechanical properties of graphene-reinforced alumina-matrix composites

B. Huang, X. Luo, W. Shah, 2020 .

Metastable phases of Al–Fe system by mechanical alloying

K. Ishihara, B. Huang, P. H. Shingu, 1997 .

Study of matrix microstructure of SiCf/Ti–43Al–9V composites

W. Zhang, B. Huang, Y. Q. Yang, 2013 .

Mechanical behavior and martensitic transformation of an Fe–Mn–Si–Al–Nb alloy

Li Jin, X. D. Wang, B. Huang, 2006 .

Martensite and its reverse transformation in nanocrystalline bulk Co

B. Huang, Y. Rong, C. Wen, 2006 .

Microstructure and Mechanical Properties of Dissimilar Joints of Al-Mg2Si and 5052 Aluminum Alloy by Friction Stir Welding

B. Huang, D. Zhang, Q. Qin, 2018, Journal of Materials Engineering and Performance.

Enhanced Machinability of Ti-5553 Alloy from Cryogenic Machining: Comparison with MQL and Flood-cooled Machining and Modeling

I. S. Jawahir, David A. Puleo, I. Jawahir, 2015 .

Growth of large crystallites of Co37Ni34Al29 ferromagnetic shape memory alloys under super-high temperature gradient directional solidification

B. Huang, J. G. Li, Jun-peng Li, 2011 .

Improved Surface Integrity from Cryogenic Machining of Ti-6Al-7Nb Alloy for Biomedical Applications☆

I. Jawahir, D. Puleo, J. Schoop, 2016 .

Preparation of high strength bulk nano-scale Fe/Cu multilayers by repeated pressing-rolling

K. Ishihara, B. Huang, P. H. Shingu, 2001 .

Bulk nano-scale Fe/Cu multilayers produced by repeated pressing-rolling and their magnetoresistance

B. Huang, K. Ishihara, P. H. Shingu, 2000 .

Determination of stacking fault probability in fcc Fe-Mn-Si-Al alloy by electron diffraction

Liduo Wang, X. D. Wang, B. Huang, 2007 .

Microstructure and mechanical properties of friction stir welds on unmodified and P-modified Al-Mg2Si-Si alloys

B. Huang, Q. Qin, X. Su, 2017 .

Structure of A-C Type Intervariant Interface in Nonmodulated Martensite in a Ni-Mn-Ga Alloy.

Y. Chen, B. Huang, M. Han, 2016, ACS applied materials & interfaces.

Epitaxial growth and superhardness effect of TiN/AlON nanomultilayers synthesized by reactive magnetron sputtering technology

B. Huang, Geyang Li, M. Kong, 2009 .

Microstructure, mechanical properties, and high-temperature oxidation resistance of AlN/SiO2 nanomultilayer coatings

Wenjie Zhao, B. Huang, Ying Wu, 2012, Journal of Coatings Technology and Research.

Formation of nanocrystalline structure in steels by ball drop test

K. Tsuchiya, M. Umemoto, B. Huang, 2002 .

Mechanical and thermal properties of multiwalled carbon-nanotube-reinforced Al2O3 nanocomposites

B. Huang, M. Umer, Chuchu Guo, 2020 .

Improved surface integrity from cryogenic machining of Al 7050-T7451 alloy with ultrafine-grained structure

I. Jawahir, Y. Kaynak, B. Huang, 2015 .

Effect of rare-earth addition on the shape memory behavior of a FeMnSiCr alloy

B. Huang, Shipu Chen, T. Hsu, 2003 .

Enhancing the Surface Integrity of Ti-6Al-4V Alloy through Cryogenic Burnishing☆

I. S. Jawahir, J. Schoop, I. Jawahir, 2014 .

Surface Layer Modification by Cryogenic Burnishing of Al 7050-T7451 Alloy With Near Ultra-Fine Grained Structure

I. Jawahir, Y. Kaynak, M. Khraisheh, 2021, Journal of Manufacturing Science and Engineering.

Surface Layer Modification by Cryogenic Burnishing of Al 7050-T7451 Alloy and Validation with FEM-based Burnishing Model☆

I. S. Jawahir, Yusuf Kaynak, I. Jawahir, 2015 .