J. Nowacki

发表

Dual-phase steels microstructure and properties consideration based on artificial intelligence techniques

S. Krajewski, J. Nowacki, 2014 .

The influence of welding heat input on submerged arc welded duplex steel joints imperfections

J. Nowacki, P. Rybicki, 2005 .

Propofol versus midazolam for sedation during percutaneous transluminal angioplasty.

K. Klose, H. Wagner, J. Nowacki, 1996, Journal of vascular and interventional radiology : JVIR.

Lattice defects in linear isotropic dielectrics

J. Nowacki, R. Hsieh, 1986 .

Chapter 72 Dislocation Fields in Piezoelectrics

V. Alshits, J. Nowacki, 2007 .

Problems of brazing cermets and steels over large surfaces

J. Nowacki, 2012 .

Structure and Stresses of Large Size Brazed Joints of Cermets and Steel

J. Nowacki, 2012 .

Microstructure and characteristics of high dimension brazed joints of cermets and steel

J. Nowacki, M. Kawiak, 2009 .

Mechanical analysis and numerical simulation of modified bone cements in the hip joint alloplasty

J. Nowacki, A. Sajek, 2011 .

Fatigue strength of butt joints welded from duplex steel

K. Kurzydłowski, J. Nowacki, H. Matysiak, 2013 .

Mechanical properties of duplex steel welded joints in large-size constructions

J. Nowacki, P. Zając, 2012 .

Microstructure and corrosion resistance of the duplex steel wide-gap one-side fluxcored wire welded joints

J. Nowacki, P. Zając, 2008 .

Ferritic-austenitic steel and its weldability in large size constructions

J. Nowacki, 2009 .

Microstructural transformations of heat affected zones in duplex steel welded joints

J. Nowacki, A. Łukojc, 2006 .

Role of copper in iron–iron boride cermets

J. Nowacki, 2001 .

Morphometry of the Cervical Spine of Emu Using the Hydrostatic Method

P. Baranowski, J. Nowacki, Sawomir Krajewski, 2018, International Journal of Morphology.

Structure and properties of Fe-Fe2B cermets

L. Klimek, J. Nowacki, 1992 .

Deformability of WC-Co sinters and 17-4 PH steel brazed joints

J. Nowacki, M. Kawiak, 2004 .

Tensions and deformations of WC–Co cermets and 17-4 PH steel vacuum brazed joints

J. Nowacki, M. Kawiak, 2003 .

Influence of initial heat treatment of 17-4 PH stainless steel on gas nitriding kinetics

J. Nowacki, P. Kochmański, 2008 .

Activated gas nitriding of 17-4 PH stainless steel

J. Nowacki, P. Kochmański, 2006 .

2D Electro-Elastic Fields in a Piezoelectric Layer-Substrate Structure

V. Alshits, A. Radowicz, J. Nowacki, 2002 .

Static and dynamic coupled fields in bodies with piezoeffects or polarization gradient

J. Nowacki, 2006 .

Thermo-electro-elastic fields accompanying plastic deformation

V. I. Alshits, V. Alshits, J. Nowacki, 2007 .

Weldability of 17-4 PH stainless steel in centrifugal compressor impeller applications

J. Nowacki, 2004 .

Artificial intelligence in the AHSS steel mechanical properties and microstructure analysis

S. Krajewski, J. Nowacki, 2016 .

Dilatometric analysis of sintering of iron–boron–cobalt P/M metal matrix composites

J. Nowacki, T. Pieczonka, 2004 .

Thermovision tests of low-alloy steel hardfacing thermal cycle of heat-resistant superalloys with nickel matrix

J. Nowacki, A. Wypych, 2011 .

Brazed joints evaluation and computer modelling of mass transport in multi-component systems in the Au–Ni solder-14-5 PH joints

R. Filipek, J. Nowacki, M. Danielewski, 2004 .

Producibility of brazed high-dimension centrifugal compressor impellers

J. Nowacki, P. Świder, 2003 .

The mechanism of reaction sintering of iron-iron boride cermets

L. Klimek, J. Nowacki, 1993, Journal of Materials Science.

Electro-elastic fields of a plane thermal inclusion in isotropic dielectrics with polarization gradient

J. Nowacki, 2004 .

Electromechanical Waves in Elastic Dielectrics

J. Nowacki, 1989 .

A Dynamic Problem for a Piezoelectric Medium

J. Nowacki, C. Trimarco, 1988 .

Comparative evaluation of various experimental and numerical simulation methods for determination of t8/5 cooling times in HPAW process weldments

J. Nowacki, Adam Sajek, J. Nowacki, 2018 .

The influence of welding heat input on the microstructure of joints of S1100QL steel in one-pass welding

P. Matkowski, J. Nowacki, A. Sajek, 2016 .

PTA-GMA hybrid welding of UHSS steel in structures of large-scale

P. Matkowski, S. Krajewski, J. Nowacki, 2015 .

Welding of MART steel with the use of matching fillers

P. Matkowski, J. Nowacki, Adam Sajek, 2014 .

Impact Tests of UHSS Steel Welded Joints Using the Drop - Tower Impact Drop Method

J. Nowacki, J. Dorożyński, A. Sajek, 2019, Advances in Materials Science.

Numerical Simulation of the Thermal Cycle of the PAW-MAG Hybrid Welding of Advanced High Strength Steels

J. Nowacki, A. Sajek, 2016 .

Influence of heat input on corrosion resistance of SAW welded duplex joints

J. Nowacki, P. Rybicki, 2006 .

Structure of AlSi-SiC composite foams surface formed by mechanical and thermal cutting

J. Nowacki, S. Krajewski, J. Nowacki, 2015 .

Preparation of Aluminium Foam Edges for Welding

S. Krajewski, J. Nowacki, 2013 .

An Ode to Cimino

J. Degnan, J. Nowacki, A. Ramanathan, 2012, The journal of vascular access.

Structure and properties of the heat-affected zone of duplex steels welded joints

J. Nowacki, A. Łukojc, 2005 .

Duplex-steel welding problems in the building of chemical cargo ships

J Nowacki, J. Nowacki, 2004 .

Phosphorus in iron alloys surface engineering

J. Nowacki, 2007 .

Structure and properties of thin iron phosphide films on carburised layers

J. Nowacki, 2004 .

Nucleation, growth and properties of thin layers of iron phosphides

J. Nowacki, 2002 .

Modification of composite nitrided layers by phosphorus compounds

J. Nowacki, 2000 .

Mathematical and chemical description of friction of diffusive phosphorized iron

J. Nowacki, 1994 .

Interaction between non-parallel dislocations in piezoelectrics

V. Alshits, A. Radowicz, J. Nowacki, 2009 .

Optimizing glue joint of aluminium metallic foams

J. Nowacki, A. Sajek, 2016 .

Polyphase Sintering of Copper - Iron - Iron Boride Cermets

J. Nowacki, 2007 .

Multiphase sintering of iron-copper-iron boride cermets.

J. Nowacki, M. Wysiecki, 1998 .

Verification of Properties of Joints Made of Advances High Strength Steels in the Conditions of the Complex Thermal Cycles of the HPAW Process

J. Nowacki, A. Sajek, 2018 .

Stresses and strains in soldered joints

J. Nowacki, M. Kawiak, 2013 .

Welding of metallic AlSi foams and AlSi–SiC composite foams

J. Nowacki, K. Moraniec, 2015 .

Evaluation of Methods of Soldering AlSi and AlSi-SiC Particle Composite Al Foams

J. Nowacki, K. Moraniec, 2014, Journal of Materials Engineering and Performance.

Measurement of welding deformations using the 3 D scanning methods

J. Nowacki, N. Sieczkiewicz, 2018 .

Magnetoelastic waves in a bicrystalline gap structure under a bias magnetic field

J. P. Nowacki, V. I. Alshits, V. N. Lyubimov, 2000 .

Application of thermovision method to welding thermal cycle analysis

J. Nowacki, A. Wypych, A. Wypych, 2010 .

Resonant excitation of waveguide SH acoustic modes in a piezoelectric plate

V. N. Lyubimov, V. Alshits, A. Radowicz, 2004 .