G. Groeninckx

发表

Reactive compatibilization of the polyamide 6/poly(phenylene oxide) blend by means of styrene–maleic anhydride copolymer

K. Dedecker, G. Groeninckx, 1999 .

The role of fibre/matrix interactions on the dynamic mechanical properties of chemically modified banana fibre/polyester composites

Sabu Thomas, Laly A. Pothan, Sabu Thomas, 2006 .

Dynamic mechanical properties of short sisal fibre reinforced polypropylene composites

Sabu Thomas, K. Joseph, G. Mathew, 2003 .

Thermal and dynamic mechanical analysis of polystyrene composites reinforced with short sisal fibres

Sabu Thomas, Sabu Thomas, G. Groeninckx, 2001 .

Crystallization of poly(ethylene terephthalate) induced by inorganic compounds. I. Crystallization behavior from the glassy state in a low‐temperature region

H. Berghmans, G. Groeninckx, N. Overbergh, 1974 .

Confined crystallization phenomena in immiscible polymer blends with dispersed micro - and nanometer sized PA6 droplets, part 1: uncompatibilized PS/PA6, (PPE/PS)/PA6 and PPE/PA6 blends

V. Mathot, G. Groeninckx, R. Tol, 2005 .

Micro- and Nanostructured Multiphase Polymer Blend Systems : Phase Morphology and Interfaces

Sabu Thomas, G. Groeninckx, C. Harrats, 2005 .

Miscibility behaviour of blends of poly(vinyl chloride) with poly(methyl methacrylate-co-styrene) copolymers

G. Groeninckx, D. Dompas, M. Isogawa, 1997 .

Miscibility behaviour of poly(styrene-co-N-maleimide)s with poly(methyl methacrylate)

G. Groeninckx, I. Vermeesch, 1995 .

Miscibility, crystallization and real-time small-angle X-ray scattering investigation of the semicrystalline morphology in thermosetting polymer blends

H. Reynaers, Q. Guo, G. Groeninckx, 2001 .

Crystallization kinetics of poly(ε-caprolactone) in miscible thermosetting polymer blends of epoxy resin and poly(ε-caprolactone)

Q. Guo, G. Groeninckx, 2001 .

Stress–strain behavior of low‐density polyethylene/poly(methyl methacrylate) blends with modulated interfaces with a hydrogenated polybutadiene‐block‐poly(methyl methacrylate) diblock copolymer

R. Jerome, G. Groeninckx, T. Benabdallah, 2005 .

Influence of compatibilizer precursor structure on the phase distribution of low density poly(ethylene) in a poly(ethylene terephthalate) matrix

G. Groeninckx, M. Coltelli, M. Aglietto, 2008 .

Fractionated crystallization in immiscible POM/(PS/PPE) blends Part 1: effect of blend phase morphology and physical state of the amorphous matrix phase

G. Groeninckx, V. Everaert, L. Aerts, 2000 .

Features, Questions and Future Challenges in Layered Silicates Clay Nanocomposites with Semicrystalline Polymer Matrices

G. Groeninckx, C. Harrats, 2008 .

Crystallization behavior of polymer/montmorillonite nanocomposites. Part I. Intercalated poly(ethylene oxide)/montmorillonite nanocomposites

B. Goderis, H. Reynaers, I. Dolbnya, 2005 .

Nanocomposites based on layered silicate and miscible PVDF/PMMA blends: melt preparation, nanophase morphology and rheological behaviour

G. Groeninckx, N. Moussaif, 2003 .

Cure kinetics, morphology and miscibility of modified DGEBA-based epoxy resin – Effects of a liquid rubber inclusion

Sabu Thomas, P. Moldenaers, C. Sinturel, 2007 .

A Study of the Utilization of Reclaimed Natural Rubber Prophylactic in Blend with Epoxidized Natural Rubber and Silica

Sabu Thomas, G. Mathew, G. Groeninckx, 2003 .

Some aspects of vapor‐induced crystallization of polycarbonate of bisphenol A

J. Mercier, G. Groeninckx, M. Lesne, 2007 .

Micro- and Nanostructured Polymer Blends: State of the Art, Challenges, and Future Prospects

Sabu Thomas, G. Groeninckx, C. Harrats, 2005 .

Reactive compatibilisation of heterogeneous ethylene propylene rubber (EPM)/nylon 6 blends by the addition of compatibiliser precursor EPM-g-MA

Sabu Thomas, G. Groeninckx, 1999 .

Correlation between the morphology and dynamic mechanical properties of ethylene vinyl acetate/linear low‐density polyethylene blends: Effects of the blend ratio and compatibilization

Sabu Thomas, G. Groeninckx, S. Bhagawan, 2006 .

Melt rheology and morphology of LLDPE/EVA blends: Effect of blend ratio, compatibilization, and dynamic crosslinking

Sabu Thomas, Z. Oommen, G. Groeninckx, 2002 .

Miscibility, crystallization and melting behaviour, and semicrystalline morphology of ternary blends of poly(ϵ-caprolactone), poly(hydroxy ether of bisphenol A) and poly(styrene-co-acrylonitrile): 1. Miscibility, crystallization and melting behaviour

M. Vanneste, G. Groeninckx, 1994 .

Influence of shear flow on the preparation of polymer layered silicate nanocomposites

B. Goderis, H. Reynaers, G. Groeninckx, 2005 .

The Toughness Behavior of Emulsion Abs. Effect of Rubber Concentration and Acrylonitrile Content on the Deformation Modes

G. Groeninckx, D. Maes, N. Alle, 1986 .

Reaction-Induced Phase Separation in Crystallizable Micro- and Nanostructured High Melting Thermoplastic/Epoxy Resin Blends

B. Goderis, G. Groeninckx, S. Goossens, 2006 .

BINARY BLENDS OF POLY(ETHER ETHER KETONE) AND POLY(ETHER IMIDE). MISCIBILITY, CRYSTALLIZATION BEHAVIOR, AND SEMICRYSTALLINE MORPHOLOGY

G. Groeninckx, G. Crevecoeur, 1991 .

Phase separation in miscible polymer blends as detected by modulated temperature differential scanning calorimetry

B. Mele, G. Groeninckx, S. Swier, 2001 .

Miscible binary blends of poly(ethylene oxide) and an amorphous aromatic polyamide (Aramide 34I): crystallization, melting behavior and semi-crystalline morphology

H. Reynaers, G. Groeninckx, Mhj Koch, 1999 .

Features on the development and stability of phase morphology in complex multicomponent polymeric systems: main focus on processing aspects

G. Groeninckx, M. Coltelli, C. Harrats, 2016 .

Miscibility, crystallization kinetics and real-time small-angle X-ray scattering investigation of the semicrystalline morphology in thermosetting polymer blends of epoxy resin and poly(ethylene oxide)

Q. Guo, G. Groeninckx, Mhj Koch, 2001 .

Dynamic mechanical properties of oil palm fiber/phenol formaldehyde and oil palm fiber/glass hybrid phenol formaldehyde composites

Sabu Thomas, M. Sreekala, G. Groeninckx, 2005 .

Dynamic mechanical behavior of acrylonitrile butadiene rubber/poly(ethylene‐co‐vinyl acetate) blends

Sabu Thomas, S. Joseph, G. Groeninckx, 2002 .

Molecular transport of aromatic hydrocarbons through nylon-6/ethylene propylene rubber blends: Relationship between phase morphology and transport characteristics

Sabu Thomas, S. C. George, K. Ninan, 2000 .

Rheological behaviour of thermoplastic elastomers from polypropylene/acrylonitrile–butadiene rubber blends: effect of blend ratio, reactive compatibilization and dynamic vulcanization

Sabu Thomas, K. Ramamurthy, K. T. Varughese, 1999 .

Dynamic mechanical and thermal properties of physically compatibilized natural rubber/poly(methyl methacrylate) blends by the addition of natural rubber-graft- poly(methyl methacrylate)

Sabu Thomas, Z. Oommen, G. Groeninckx, 2000 .

Morphology and melting behaviour of semi-crystalline poly(ethylene terephthalate): 3. Quantification of crystal perfection and crystallinity

H. Reynaers, G. Groeninckx, F. Fontaine, 1982 .

Morphology and mechanical and viscoelastic properties of natural rubber and styrene butadiene rubber latex blends

Sabu Thomas, G. Groeninckx, S. S. Rao, 2000 .

Design and characterisation of microfibrillar reinforced composite materials based on PET/PA12 blends

Sabu Thomas, G. Groeninckx, C. Harrats, 2004 .

Melt rheology and morphology of uncompatibilized and in situ compatibilized nylon‐6/ethylene propylene rubber blends

Sabu Thomas, J. Mewis, P. Moldenaers, 2004 .

Sub-micrometer polyamide droplets dispersed in polyethylene: Dimensional stability above the melting point of polyethylene

M. Sánchez, V. Mathot, G. Groeninckx, 2006 .

Fractionation and thermal behaviour of linear low density polyethylene

G. Groeninckx, B. Heijden, P. Schouterden, 1987 .

Dynamic mechanical behavior of short coir fiber reinforced natural rubber composites

Sabu Thomas, V. G. Geethamma, Sabu Thomas, 2005 .

Molecular, thermal and morphological characterization of narrowly branched fractions of 1-octene LLDPE: 2. Study of the lamellar morphology by transmission electron microscopy

G. Groeninckx, B. Heijden, P. Schouterden, 1992 .

Rapidly cooled polyethylenes: On the thermal stability of the semicrystalline morphology

B. Goderis, H. Reynaers, W. Bras, 2006 .

Characterization of the dual crystal population in an isothermally crystallized homogeneous ethylene-1-octene copolymer

J. Gelan, B. Goderis, H. Reynaers, 2004 .

Molecular, thermal and morphological characterization of narrowly branched fractions of 1-octene linear low-density polyethylene: 1. Molecular and thermal characterization

G. Groeninckx, B. Heijden, P. Schouterden, 1992 .

Morphology and melting behavior of semicrystalline poly(ethylene terephthalate). II. Annealed PET

H. Reynaers, G. Groeninckx, 1980 .

Immiscible polymer blends of semicrystalline biocompatible components: thermal properties and phase morphology analysis of PLLA/PCL blends

Ramiro Dell'Erba, Mario Malinconico, Giovanni Maglio, 2001 .

Miscibility and morphology of binary polymer blends of polycaprolactone with solution-chlorinated polyethylenes

H. Reynaers, G. Groeninckx, G. Defieuw, 1989 .

Diffusion and segregation phenomena in miscible binary polymer blends during crystallization

H. Reynaers, G. Groeninckx, G. Defieuw, 1989 .

Morphology and melting behavior of semicrystalline poly(ethylene terephthalate). I. Isothermally crystallized PET

H. Reynaers, H. Berghmans, G. Groeninckx, 1980 .

Miscible binary blends of poly(ethylene oxide) and poly(ether sulfone). 2. Real-time small-angle X-ray scattering investigation of the semicrystalline morphology

H. Reynaers, G. Groeninckx, Mhj Koch, 1999 .

Nano-structured polymer blends: phase structure, crystallisation behaviour and semi-crystalline morphology of phase separated binary blends of poly(ethylene oxide) and poly(ether sulphone)

B. Nysten, D. Ivanov, G. Groeninckx, 2000 .

Miscible binary blends of poly(ethylene oxide) and poly(ether sulphone). Part 1 : Crystallization kinetics, morphology and thermal behavior

Zhengping Fang, G. Groeninckx, G. Dreezen, 1999 .

Investigation of the deformation and recovery behavior of nylon-6/rubber thermoplastic vulcanizates on the molecular level by infrared-strain recovery measurements

G. Groeninckx, M. Soliman, J. Oderkerk, 2002 .

Toughening behaviour of rubber-modified thermoplastic polymers involving very small rubber particles: 1. A criterion for internal rubber cavitation

G. Groeninckx, D. Dompas, 1994 .

Cavitation versus debonding during deformation of rubber-modified poly(vinyl chloride)

G. Groeninckx, D. Dompas, M. Isogawa, 1995 .

Miscible PS/PPE compounds: an alternative for blend phase morphology studies? Influence of the PPE content on the surface tension of PS/PPE and on the interfacial tension in PP/(PS/PPE) and POM/(PS/PPE) blends

J. Mewis, P. Moldenaers, G. Groeninckx, 2000 .

Reactive compatibilisation of A/(B/C) polymer blends. Part 1. Investigation of the phase morphology development and stabilisation

K. Dedecker, G. Groeninckx, 1998 .

Reactive compatibilisation of A/(B/C) polymer blends. Part 2. Analysis of the phase inversion region and the co-continuous phase morphology

K. Dedecker, G. Groeninckx, 1998 .

Interfacial Graft Copolymer Formation during Reactive Melt Blending of Polyamide 6 and Styrene−Maleic Anhydride Copolymers

K. Dedecker, G. Groeninckx, 1999 .

Crystallization, Morphological Structure, and Melting of Polymer Blends

M. Vanneste, G. Groeninckx, V. Everaert, 2003 .

Cure kinetics, morphological and dynamic mechanical analysis of diglycidyl ether of bisphenol-A epoxy resin modified with hydroxyl terminated poly(ether ether ketone) containing pendent tertiary butyl groups

Sabu Thomas, Bejoy Francis, G. Groeninckx, 2006 .

Rheology and morphology of polystyrene/polypropylene blends with in situ compatibilization

P. Moldenaers, G. Groeninckx, Yanli Huo, 2007 .

Quantitative evaluation of fractionated and homogeneous nucleation of polydisperse distributions of water-dispersed maleic anhydride-grafted-polypropylene micro- and nano-sized droplets

L. Bremer, J. Ibarretxe, V. Mathot, 2009 .

Characterization of the morphological changes in linear low-density polyethylene during the melting process using synchrotron radiation

C. Riekel, H. Reynaers, G. Groeninckx, 1989 .

Miscibility, crystallization and melting behaviour, and morphology of binary blends of polycaprolactone with styrene-co-maleic anhydride copolymers

H. Reynaers, G. Groeninckx, G. Defieuw, 1989 .

Ultimate mechanical properties of rubber toughened semicrystalline PET at room temperature

G. Groeninckx, W. Loyens, 2002 .

TRANSAMIDATION IN MELT-MIXED ALIPHATIC AND AROMATIC POLYAMIDES. 1. DETERMINATION OF THE DEGREE OF RANDOMNESS AND NUMBER-AVERAGE BLOCK LENGTH BY MEANS OF 13C NMR

G. Groeninckx, A. M. Aerdts, K. Eersels, 1996 .

TRANSAMIDATION IN MELT-MIXED ALIPHATIC AND AROMATIC POLYAMIDES. II: MOLECULAR CHARACTERIZATION OF PA 46/PA 6I BLENDS AS A FUNCTION OF THE EXTRUSION TIME, EXTRUSION TEMPERATURE, AND BLEND COMPOSITION

G. Groeninckx, A. M. Aerdts, K. Eersels, 1996 .

Phase continuity detection and phase inversion phenomena in immiscible polypropylene/polystyrene blends with different viscosity ratios

P. Moldenaers, G. Groeninckx, Tolibjon S. Omonov, 2007 .

Toughening behaviour of rubber-modified thermoplastic polymers involving very small rubber particles: 2. Rubber cavitation behaviour in poly(vinyl chloride)/methyl methacrylate-butadiene-styrene graft copolymer blends

G. Groeninckx, D. Dompas, M. Isogawa, 1994 .

Mutual Influence between Reaction-Induced Phase Separation and Isothermal Crystallization in POM/Epoxy Resin Blends

G. Groeninckx, S. Goossens, 2006 .

The thermal and crystallisation studies of short sisal fibre reinforced polypropylene composites

V. S. Prasad, Sabu Thomas, Sabu Thomas, 2003 .

Styrene–butadiene rubber/natural rubber blends: Morphology, transport behavior, and dynamic mechanical and mechanical properties

Sabu Thomas, Soney C. George, K. N. Ninan, 2000 .

Phase morphology development in immiscible PP/(PS/PPE) blends influence of the melt-viscosity ratio and blend composition

G. Groeninckx, V. Everaert, L. Aerts, 1999 .

Miscibility, crystallization and melting behaviour, and semicrystalline morphology of binary blends of polycaprolactone with poly(hydroxy ether of bisphenol A)

H. Reynaers, G. Groeninckx, G. Defieuw, 1989 .

Location of a nanoclay at the interface in an immiscible poly(ε‐caprolactone)/poly(ethylene oxide) blend and its effect on the compatibility of the components

Zhengping Fang, G. Groeninckx, C. Harrats, 2007 .

Cure kinetics and morphology of blends of epoxy resin with poly (ether ether ketone) containing pendant tertiary butyl groups

Sabu Thomas, Bejoy Francis, G. Groeninckx, 2003 .

High melting thermoplastic/epoxy resin blends: Influence of the curing reaction on the crystallization and melting behavior

G. Groeninckx, S. Goossens, 2007 .

Melt‐spinning of in‐situ composites of a thermotropic liquid crystalline polyester in a miscible matrix of poly(ether ether ketone) and poly(ether imide)

G. Groeninckx, G. Crevecoeur, 1992 .

Phase morphology characterization and ultimate mechanical properties of 60/40 PC/SAN blend: Influence of the acrylonitrile content of SAN

G. Groeninckx, L. Aerts, D. Quintens, 1991 .

Influence of transreaction processes on the morphology of semicrystalline aliphatic/aromatic polyamide blends

H. Reynaers, G. Groeninckx, K. Eersels, 1998 .

Study of the miscibility and the phase behaviour of amorphous binary blends of poly(hydroxy ether of bisphenol A) and poly(styrene-co-acrylonitrile)

M. Vanneste, G. Groeninckx, 1994 .

Phase morphology coarsening and quantitative morphological characterization of a 60/40 blend of polycarbonate of bisphenol a (pc) and poly(styrene‐bco‐acrylonitrile) (san)

G. Groeninckx, L. Aerts, D. Quintens, 1990 .

Influence of interchange reactions on the crystallization and melting behaviour of polyamide blends as affected by the processing conditions

G. Groeninckx, K. Eersels, 1996 .

Miscibility, crystallization and melting behaviour and semicrystalline morphology of ternary blends of poly(ε-caprolacton), poly(hydroxy ether of bisphenol A) and poly(styrene-co-acrylonitrile): 2. Semicrystalline morphology

H. Reynaers, M. Vanneste, G. Groeninckx, 1997 .

Ternary blends of PCL, SAN15 and SMA14: miscibility, crystallization and melting behaviour, and semicrystalline morphology

M. Vanneste, G. Groeninckx, 1995 .

Miscibility of blends of poly(ϵ-caprolactone) with aromatic polyesters containing mesogenic biphenyl units

C. Samyn, H. Reynaers, G. Groeninckx, 1992 .

Crystallization behavior of polymer/montmorillonite nanocomposites. Part III. Polyamide-6/montmorillonite nanocomposites, influence of matrix molecular weight, and of montmorillonite type and concentration

B. Goderis, V. Mathot, G. Groeninckx, 2006 .

In‐Situ Composites Based on Thermoplastic and Thermotropic Liquid Crystalline Polymers

G. Groeninckx, G. Crevecoeur, 2010 .

Effect of fibre length and chemical modifications on the tensile properties of intimately mixed short sisal/glass hybrid fibre reinforced low density polyethylene composites

Selvin P. Thomas, Sabu Thomas, C. Pavithran, 2004 .

IN-SITU REINFORCEMENT IN BLENDS OF THERMOPLASTICS AND THERMOTROPIC LIQUID CRYSTALLINE POLYMERS

G. Groeninckx, G. Crevecoeur, 1991 .

Morphology and mechanical-properties of thermoplastic composites containing a thermotropic liquid-crystalline polymer

G. Groeninckx, G. Crevecoeur, 1990 .

In Situ Composites Based on Thermotropic and Flexible Polymers

G. Groeninckx, G. Crevecoeur, 1989 .

Miscibility of blends of LC polyesters and blends of polybutylene terephthalate with LC polyester

C. Samyn, H. Reynaers, G. Groeninckx, 1994 .

Influence of fractionated crystallization on the semicrystalline structure of (POM/(PS/PPE)) blends. Static and time-resolved SAXS, WAXD and DSC studies

H. Reynaers, G. Groeninckx, V. Everaert, 2003 .

Polyamide 6/ethylene-butylene elastomer blends generated via anionic polymerization of ε-caprolactam: Phase morphology and dynamic mechanical behavior

G. Groeninckx, Tolibjon S. Omonov, C. Harrats, 2004 .

Reactive compatibilization of A/(B/C) polymer blends. Part 3. Quantitative analysis of the interfacial thickness and the interfacial reaction

K. Dedecker, G. Groeninckx, Takashi Inoue, 1998 .

Preparation of Epoxy-Functionalized Methyl Methacrylate-Butadiene-Styrene Core-Shell Particles and Investigation of Their Dispersion in Polyamide-6

J. Geurts, G. Groeninckx, Van Aert, 1997 .

Crystallization, Micro- and Nano-structure, and Melting Behavior of Polymer Blends

M. Vanneste, G. Groeninckx, V. Everaert, 2014 .

High Stiffness and High Impact StrengthPolymer Composites by Hot Compaction ofOriented Fibers and Tapes

I. Ward, A. Hiltner, E. Baer, 2005 .

Phase morphology development and stabilization in polycyclohexylmethacrylate/polypropylene blends: uncompatibilized and reactively compatibilized blends using two reactive precursors

P. Moldenaers, G. Groeninckx, Tolibjon S. Omonov, 2004 .

Phase morphology development in reactively compatibilised polyethylene terephthalate/elastomer blends

G. Groeninckx, W. Loyens, 2002 .

Morphology development by reactive compatibilisation and dynamic vulcanisation of nylon6/EPDM blends with a high rubber fraction

G. Groeninckx, J. Oderkerk, 2002 .

Transamidation in Melt-Mixed Aliphatic and Aromatic Polyamides. 3. Molecular Characterization Using Gradient Elution Chromatography (GEC)

G. Groeninckx, S. Wal, Y. Mengerink, 1996 .

Rubber toughened semicrystalline PET: influence of the matrix properties and test temperature

G. Groeninckx, W. Loyens, 2003 .

Co-continuous and encapsulated three phase morphologies in uncompatibilized and reactively compatibilized polyamide 6/polypropylene/polystyrene ternary blends using two reactive precursors

G. Groeninckx, Tolibjon S. Omonov, C. Harrats, 2005 .

Immiscible Poly(L-lactide)/Poly(ε-caprolactone) Blends: Influence of the Addition of a Poly(L-lactide)-Poly(oxyethylene) Block Copolymer on Thermal Behavior and Morphology

M. Malinconico, G. Groeninckx, A. Migliozzi, 2004 .

Reactive Processing Of Polymer Blend Using Reactive Compatibilization And Dynamic Crosslinking: Phase Morphology Control And Microstructure – Property Relations

G. Groeninckx, C. Harrats, 2004 .

Chemical modification of poly(styrene-co-maleic anhydride) with primary N-alkylamines by reactive extrusion

G. Groeninckx, I. Vermeesch, 1994 .

Mechanical behavior related to the phase morphology of PC/SAN polymer blends

G. Groeninckx, L. Aerts, D. Quintens, 1990 .

Anisotropy and instability of the co-continuous phase morphology in uncompatibilized and reactively compatibilized polypropylene/polystyrene blends

P. Moldenaers, G. Groeninckx, Tolibjon S. Omonov, 2007 .

Reactive Blending with Immiscible Functional Polymers: Molecular, Morphological, and Interfacial Aspects

Sabu Thomas, G. Groeninckx, C. Harrats, 2001 .

Reactively compatibilized polymer blends: Interfacial chemical reactions during melt-extrusion

K. Dedecker, G. Groeninckx, 1998 .

Nylon 6/ethylene propylene rubber (EPM) blends: Phase morphology development during processing and comparison with literature data

Sabu Thomas, G. Groeninckx, 1999 .

Effect of reactive compatibilization on the interfacial slip in Nylon-6/EPR blends

P. Moldenaers, Z. Oommen, G. Groeninckx, 2003 .

Phase morphology and stability of co-continuous (PPE/PS)/PA6 and PS/PA6 blends: effect of rheology and reactive compatibilization

J. Mewis, P. Moldenaers, G. Groeninckx, 2004 .

Crystallization of polyamide confined in sub-micrometer droplets dispersed in a molten polyethylene matrix

V. Mathot, G. Groeninckx, G. V. Poel, 2006 .

Confined crystallization phenomena in immiscible polymer blends with dispersed micro-and nanometer sized PA6 droplets part 4: polymorphous structure and (meta)-stability of PA6 crystals formed in different temperature regions

B. Goderis, H. Reynaers, V. Mathot, 2005 .

Deformation mechanisms in rubber toughened semicrystalline polyethylene terephthalate

G. Groeninckx, W. Loyens, 2003 .

Molecular, thermal, and morphological characterization of narrowly branched fractions of 1-octene linear low-density polyethylene .3. lamellar and spherulitic morphology

H. Reynaers, G. Groeninckx, B. Heijden, 1993 .

Treatment of water-induced curvature of the DSC heat flow rate signal

J. Ibarretxe, V. Mathot, G. Groeninckx, 2011 .

Preparation of water-borne dispersions of polyolefins: new systems for the study of homogeneous nucleation of polymers

L. Bremer, V. Mathot, G. Groeninckx, 2004 .

Full Dissolution and Crystallization of Polyamide 6 and Polyamide 4.6 in Water and Ethanol

B. Goderis, V. Mathot, G. Groeninckx, 2007 .

Melt rheology and morphology of physically compatibilized natural rubber–polystyrene blends by the addition of natural rubber‐g‐polystyrene

Sabu Thomas, M. kumaran, G. Groeninckx, 1998 .

Confined crystallization phenomena in immiscible polymer blends with dispersed micro- and nanometer sized PA6 droplets, part 3 : crystallization kinetics and crystallinity of micro- and nanometer sized PA6 droplets crystallizing at high supercoolings

V. Mathot, G. Groeninckx, R. Tol, 2005 .

Confined crystallization phenomena in immiscible polymer blends with dispersed micro- and nanometer sized PA6 droplets, part 2: reactively compatibilized PS/PA6 and (PPE/PS)/PA6 blends

V. Mathot, G. Groeninckx, R. Tol, 2005 .

Sheet extrusion of in‐situ composites: Influence of processing parameters

G. Groeninckx, G. Crevecoeur, 1993 .

Micromechanical Deformation and Recovery Processes of Nylon-6/Rubber Thermoplastic Vulcanizates As Studied by Atomic Force Microscopy and Transmission Electron Microscopy

Louis Hellemans, Bart Goderis, B. Goderis, 2002 .

Viscoelastic properties of nanostructured natural rubber/polystyrene interpenetrating polymer networks

G. Michler, Sabu Thomas, A. Mathew, 2003 .

Reaction induced phase separation in semicrystalline thermoplastic/epoxy resin blends

B. Goderis, G. Groeninckx, G. V. Poel, 2005 .

Relationship between Phase Morphology, Crystallization, and Semicrystalline Structure in Immiscible Polymer Blends

H. Reynaers, V. Mathot, G. Groeninckx, 2005 .

Visco‐elastic properties related to the phase morphology of 60/40 PC/SAN blend

G. Groeninckx, L. Aerts, D. Quintens, 1991 .

Morphology and modulus–temperature behavior of semicrystalline poly(ethylene terephthalate) (PET)

H. Berghmans, G. Groeninckx, G. Smets, 1976 .

Viscoelasticity, Ultimate Mechanical Properties and Yielding Mechanisms of Thermally Crystallized Polyethylene Terephthalate

G. Groeninckx, 1984 .

Quantitative morphological characterization of semi-crystalline PET

H. Reynaers, H. Berghmans, G. Groeninckx, 1974 .

A new thermally-processable aramid/amorphous nylon blend with high heat resistance and high stiffness

G. Groeninckx, S. Nakata, 1996 .

Poly(styrene-co-n-maleimide) copolymers - preparation by reactive extrusion, molecular characterization by ftir, and use in blends

G. Groeninckx, I. Vermeesch, M. Coleman, 1993 .

The role of crosslinking and crystallisation on the transport characteristics of ethylene–propylene rubber membranes

G. Unnikrishnan, Sabu Thomas, M. Sreekala, 2000 .

Reactively and physically compatibilized immiscible polymer blends: Stability of the copolymer at the interface

R. Jerome, K. Dedecker, G. Groeninckx, 2003 .