J. Chen

发表

Micro scale 3D FEM simulation on thermal evolution within the porous structure in selective laser sintering

Qiang Zhang, F. Liu, Weiping Zhou, 2012 .

Effects of Current Stressing on Formation and Evolution of Kirkendall Voids at Sn–3.5Ag/Cu Interface

H. Lu, Hao Lu, J. Chen, 2010 .

Effects of dispersion particle agents on the hardening of V–4Cr–4Ti alloys

X. Duan, Jijun Zhao, T. Muroga, 2014 .

Microstructural Control for Improving Properties of V-4Cr-4Ti Alloys

T. Muroga, T. Nagasaka, J. Chen, 2010 .

Mechanical properties of V–4Cr–4Ti strengthened by precipitation and cold rolling

T. Muroga, T. Nagasaka, Chunjing Li, 2008 .

Development of fabrication technology for low activation vanadium alloys as fusion blanket structural materials

T. Muroga, T. Nagasaka, J. Chen, 2006 .

Improvement of Vanadium Alloys by Precipitate Control for Structural Components of Fusion Reactors

T. Muroga, T. Nagasaka, A. Nishimura, 2005 .

Thermal radiative properties of electron-beam-melted and mechanically alloyed V-4Cr-4Ti based alloys between 200 and 750 °C

M. Tello, H. Fu, T. Echániz, 2019, Journal of Nuclear Materials.

Microstructural characterization of a diffusion-bonded joint for 9Cr-ODS and JLF-1 reduced activation ferritic/martensitic steels

T. Muroga, T. Nagasaka, H. Fu, 2014 .

Present Status of Vanadium Alloys for Fusion Applications

T. Muroga, V. Chernov, J. Chen, 2014 .

Overview of the vanadium alloy researches for fusion reactors

T. Muroga, V. Chernov, J. Chen, 2011 .

Hydrogen embrittlement of a V4Cr4Ti alloy evaluated by different test methods

T. Muroga, S. Qiu, J. Chen, 2004 .

FIRST-PRINCIPLES CALCULATIONS OF MECHANICAL PROPERTIES OF TIC AND TIN

Hao Lu, J. Chen, Chun Yu, 2009 .

Ductility dip cracking mechanism of Ni–Cr–Fe alloy based on grain boundary energy

Huili Lu, H. Lu, J. Chen, 2013 .

Microstructure and high temperature sliding wear behaviour of laser remelted NiCrBSi/35(WC–12Ni) composite coating

J. Chen, B. Yin, F. Yan, 2011 .

Fretting wear behaviour of titanium modified by heat treatment

J. Weng, J. Chen, S. Qu, 2011 .

Overview of R&D on Plasma-Facing Materials and Components in China

J. Chen, D. Yao, Q. Li, 2012 .

Effect of the microstructure in unmixed zone on corrosion behavior of 439 tube/308L tube-sheet welding joint

J. Chen, Hongzhou Lu, Chun Yu, 2017 .

Research on TiAl Alloy Porous Metal Flow Restrictors

H. Tang, P. Tan, J. Zhu, 2009 .

Effect of grain boundary behaviour on ductility dip cracking mechanism

H. Lu, J. Chen, W. Cui, 2014 .

Assessment of ductility dip cracking susceptibility on Ni based alloy by FEM simulation

H. Lu, J. Chen, J. Chen, 2012 .

The hydrogen-induced ductility loss and strengthening of V-base alloys

Y. Chen, T. Nagasaka, T. Muroga, 2004 .

Fabrication using electron beam melting of a V–4Cr–4Ti alloy and its thermo-mechanical strengthening study

T. Muroga, T. Nagasaka, H. Fu, 2013 .

Creep properties of V-4Cr-4Ti strengthened by cold working and aging

T. Muroga, T. Nagasaka, J. Chen, 2011 .

The recovery and recrystallization of cold rolled V-W-Ti alloys

T. Muroga, T. Nagasaka, S. Qiu, 2003 .

The development of advanced vanadium alloys for fusion applications

Y. Chen, T. Muroga, T. Nagasaka, 2004 .

Progress in fusion technology at SWIP

Y. Wang, Yong Liu, J. Chen, 2016 .

Microstructures and mechanical properties of mechanically alloyed V–4Cr–4Ti alloy dispersion strengthened by nano-particles

T. Muroga, T. Nagasaka, J. Chen, 2014 .

Investigation on mechanical alloying process for vanadium alloys

T. Muroga, T. Nagasaka, J. Chen, 2013 .

Microstructure of creep-deformed V–4Cr–4Ti strengthened by precipitation and cold rolling

T. Muroga, T. Nagasaka, J. Chen, 2009 .

The mechanical properties of V-4Cr-4Ti in various thermo-mechanical states

Chunjing Li, T. Nagasaka, T. Muroga, 2006 .

Precipitation behavior in V-6W-4Ti, V-4Ti and V-4Cr-4Ti alloys

Chunjing Li, J. M. Chen, Y. Chen, 2004 .

The influence of temperature on swelling behavior in electron irradiated austenitic stainless steels

J. Sun, J. Chen, J. Qian, 1992 .

Review of advances in development of vanadium alloys and MHD insulator coatings

Bruce A Pint, Manabu Satou, Atsuyuki Suzuki, 2007 .

Influence of smelting processes on precipitation behaviors and mechanical properties of low activation ferrite steels

Z. Y. Xu, J. Chen, C. Zhang, 2010 .

Microsliding wear behaviour of HVOF sprayed conventional and nanostructured WC–12Co coatings at elevated temperatures

Hui-di Zhou, Jianmin Chen, Fengyuan Yan, 2010 .

Effects of weld metal strength and transformation temperature on welding residual stress

H. Lu, J. Chen, M. Xu, 2015 .

Status and strategy of fusion materials development in China

Qunying Huang, Jianfeng Yang, Xianglin Chen, 2009 .

IT / P 7-10 1 ITER first wall fabrication technology in China

Z. N. Li, C. Pan, P. Zhang, 2008 .

Erosion and re-deposition behavior of plasma facing materials due to tokamak plasma disruption

Yong Liu, J. Chen, L. Yan, 2002 .

Plasma facing conponents of EAST

S. Wang, J. Chen, Y.T. Song, 2009, 2009 23rd IEEE/NPSS Symposium on Fusion Engineering.

Effect of heat treatment on wear behaviour of WC–(W,Cr)2C–Ni coating

J. Chen, Y. An, J. Chen, 2012 .

Modeling of the beam transportation behavior in selective laser transmission sintering the translucent core–shell composite powder

Cunfu He, J. M. Chen, F. R. Liu, 2013 .

Finite element simulation of butt welded 2·25Cr–1·6W steel pipe incorporating bainite phase transformation

H. Lu, J. Chen, J. J. Xu, 2013 .

A liquid metal experimental loop for MHD pressure drop and compatibility studies

K. Sun, J. Qian, J. Qian, 1991 .

Magnetohydrodynamic pressure drop in a quickly changing magnetic field

J. Qian, Z. Y. Xu, J. Chen, 1995 .

ITR/P1-46 Characterization of Chinese Beryllium as the Candidate Armor Material of ITER First Wall

Z. Wang, J. Chen, M. Roedig, 2010 .

Characterization for Fusion Candidate Vanadium Alloys

Yican Wu, T. Muroga, T. Nagasaka, 2004 .

Investigations on interface debonding of the particle reinforced metal matrix composites in laser forming

Chak Yin Tang, J. M. Chen, K. Chan, 2009 .

Research and Development of Reduced Activation Ferritic/Martensitic Steel CLF-1 at SWIP

Z. Y. Xu, J. Chen, S. Liu, 2010 .