M. Mayor

发表

Feeling Up to Par: Medicine From Tee to Green

M. Mayor, 1995 .

Overview of polyethylene as a bearing material: comparison of sterilization methods.

J. Currier, M. Mayor, J. Collier, 1996, Clinical orthopaedics and related research.

The changes in stress distribution of femurs with bone ingrown porous-coated hip prosthesis

C. Hawthorne, M. Mayor, J. Collier, 1989, Proceedings of the Fifteenth Annual Northeast Bioengineering Conference.

Femoral stem fracture and in vivo corrosion of retrieved modular femoral hips.

J. Currier, D. V. Van Citters, M. Mayor, 2012, The Journal of arthroplasty.

In Vivo Oxidation of γ-Barrier–Sterilized Ultra–High-Molecular-Weight Polyethylene Bearings

J. Currier, D. V. Citters, K. Lyford, 2007 .

Clinical wear measurement on low contact stress rotating platform knee bearings.

F. Kennedy, J. Currier, S. Atwood, 2008, The Journal of arthroplasty.

Oxidation of Ultra-High Molecular Weight Polyethylene and Its Influence on Contact Fatigue and Pitting of Knee Bearings

F. Kennedy, J. Currier, D. V. Van Citters, 2003 .

Pulse repetition rate dependence of hydroxylapatite deposition by laser ablation

J. Pou, M. Pérez-Amor, B. Léon, 2002 .

Transport of ablated material through a water vapor atmosphere in pulsed laser deposition of hydroxylapatite

J. Pou, M. Pérez-Amor, B. Léon, 2002 .

Mechanisms of Failure of Modular Prostheses

R. E. Jensen, M. Mayor, J. Collier, 1992, Clinical orthopaedics and related research.

Structural analysis of calcium phosphate coatings produced by pulsed laser deposition at different water-vapour pressures

J. Pou, M. Pérez-Amor, B. Léon, 1997, Journal of materials science. Materials in medicine.

Hip arthroscopy: surgical approach, positioning, and distraction.

J. Mccarthy, W. Barsoum, B. Owens, 2003, Clinical orthopaedics and related research.

Experimentally induced degenerative joint lesions following partial meniscectomy in the rabbit.

R. Moskowitz, A. Burstein, V. Frankel, 1973, Arthritis and rheumatism.

Loss of hydroxyapatite coating on retrieved, total hip components.

R. E. Jensen, M. Mayor, J. Collier, 1993, The Journal of arthroplasty.

Results of implant retrieval from postmortem specimens in patients with well-functioning, long-term total hip replacement.

J. Galante, S. Cook, W. Harris, 1992, Clinical orthopaedics and related research.

Incidence of bilateral proximal femoral fractures in a tertiary care center.

M. Mayor, B. Kaper, 2001, Orthopedics.

Tibiotalar contact area. Contribution of posterior malleolus and deltoid ligament.

J. Gorczyca, M. Mayor, J. Hartford, 1995, Clinical orthopaedics and related research.

The biocompatibility of materials for internal fixation of fractures.

M. Mayor, S. Brown, 1978, Journal of biomedical materials research.

Laser ablation rate of hydroxylapatite in different atmospheres

J. Pou, M. Pérez-Amor, B. Léon, 2003 .

Physicochemical properties of calcium phosphate coatings produced by pulsed laser deposition at different water vapour pressures.

J. Pou, M. Pérez-Amor, B. Léon, 1998, Biomaterials.

Micro- and nano-testing of calcium phosphate coatings produced by pulsed laser deposition.

J. Pou, M. Pérez-Amor, B. Léon, 2003, Biomaterials.

Stoichiometric transfer in pulsed laser deposition of hydroxylapatite

J. Pou, M. Pérez-Amor, B. Léon, 2000 .

The tradeoffs associated with modular hip prostheses.

M. Mayor, J. Collier, B. Currier, 1995, Clinical orthopaedics and related research.

Metal transfer on a ceramic head with a single rim contact.

J. Currier, D. V. Van Citters, M. Mayor, 2012, The Journal of arthroplasty.

Enhanced ingrowth of porous-coated CoCr implants plasma-sprayed with tricalcium phosphate.

M. Mayor, J. Collier, V. A. Surprenant, 1992, Journal of biomedical materials research.

Hydroxyapatite coatings: a comparative study between plasma-spray and pulsed laser deposition techniques

J. Pou, M. Pérez-Amor, B. Léon, 1997, Journal of materials science. Materials in medicine.

The Otto Aufranc Award. Impact of gamma sterilization on clinical performance of polyethylene in the hip.

K. Saum, J. Currier, J. Collier, 1995, Clinical orthopaedics and related research.

Rim cracking of the cross-linked longevity polyethylene acetabular liner after total hip arthroplasty.

J. Currier, K. Lyford, D. V. Van Citters, 2007, The Journal of bone and joint surgery. American volume.

Impact of gamma sterilization on clinical performance of polyethylene in the knee.

K. Saum, J. Currier, M. Mayor, 1996, The Journal of arthroplasty.

Evaluation of oxidation and fatigue damage of retrieved crossfire polyethylene acetabular cups.

J. Currier, K. Lyford, D. V. Van Citters, 2007, The Journal of bone and joint surgery. American volume.

Corrosion between the components of modular femoral hip prostheses.

R. E. Jensen, M. Mayor, V. A. Surprenant, 1992, The Journal of bone and joint surgery. British volume.

Knee Wear Measured in Retrievals: A Polished Tray Reduces Insert Wear

D. Berry, J. Currier, M. Mayor, 2012, Clinical orthopaedics and related research.

Fatigue fracture of a proximally modular, distally tapered fluted implant with diaphyseal fixation.

M. Buttaro, D. V. Van Citters, M. Mayor, 2007, The Journal of arthroplasty.

Mechanism of obstruction of closed-wound suction tubing.

J. Strohbehn, M. Mayor, S. Brown, 1979, Archives of surgery.

Corrosion at the interface of cobalt-alloy heads on titanium-alloy stems.

R. E. Jensen, M. Mayor, V. A. Surprenant, 1991, Clinical orthopaedics and related research.

Gamma-irradiation Sterilization in an Inert Environment: A Partial Solution

D. Berry, M. Mayor, B. Currier, 2012, Clinical orthopaedics and related research.

Effect of fabrication method and resin type on performance of tibial bearings.

J. Currier, M. Mayor, B. Currier, 2000, Journal of biomedical materials research.

The correlation between fusion defects and damage in tibial polyethylene bearings.

R. E. Jensen, M. Mayor, M. Wrona, 1994, Clinical orthopaedics and related research.

Efficacy of Plasma‐Sprayed Tricalcium Phosphate in Enhancing the Fixation of Smooth Titanium Intramedullary Rods

M. Mayor, J. Chae, J. P. Collier, 1988, Annals of the New York Academy of Sciences.

A comparison of contact pressures in tibial and patellar total knee components before and after service in vivo.

R E Jensen, R. E. Jensen, M. Mayor, 1994, Clinical orthopaedics and related research.

Shelf Life and In Vivo Duration; Impacts on Performance of Tibial Bearings

J. Currier, R. Scott, M. Mayor, 1997, Clinical orthopaedics and related research.

Analysis of the Failure of 122 Polyethylene Inserts From Uncemented Tibial Knee Components

R. E. Jensen, M. Mayor, V. A. Surprenant, 1991, Clinical orthopaedics and related research.

Potential errors inherent in quantitative densitometric analysis of orthopaedic radiographs. A study after total hip arthroplasty.

M. Mayor, J. West, J. P. Collier, 1987, The Journal of bone and joint surgery. American volume.

Macroscopic and microscopic evidence of prosthetic fixation with porous-coated materials.

J. Chae, M. Mayor, J P Collier, 1988, Clinical orthopaedics and related research.

Current sterilization and packaging methods for polyethylene.

M. Mayor, B. Currier, L. Bargmann, 1999, Clinical orthopaedics and related research.

Evaluating the suitability of highly cross-linked and remelted materials for use in posterior stabilized knees.

J. Currier, D. V. Van Citters, M. Mayor, 2010, Journal of biomedical materials research. Part B, Applied biomaterials.

Wear Rate in a Series of Retrieved RP Knee Bearings

J. Currier, D. V. Citters, M. Mayor, 2011 .

Damage and Wear: An Important Distinction in Rotating Platform Knee Bearings

J. Currier, D. V. Citters, S. Dean, 2011 .

Contribution of micro‐motion to backside wear in a fixed bearing total knee arthroplasty

Kathleen A. Lewicki, J. Currier, D. V. Van Citters, 2016, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

The biomechanical problems of polyethylene as a bearing surface.

R. E. Jensen, M. Mayor, V. A. Surprenant, 1990, Clinical orthopaedics and related research.

The Impact of Sterilization Method on Wear in Knee Arthroplasty

M. Mayor, J. P. Collier, Ian R. Williams, 1998, Clinical orthopaedics and related research.

In vivo oxidation of gamma-barrier-sterilized ultra-high-molecular-weight polyethylene bearings.

J. Currier, K. Lyford, D. V. Van Citters, 2007, The Journal of arthroplasty.

Analysis of wear asymmetry in a series of 94 retrieved polyethylene tibial bearings.

J. Currier, M. Mayor, John H Currier, 2005, Journal of biomechanics.

Metal allergy and the surgical patient.

S. A. Brown, M. Mayor, K. Merritt, 1980, American journal of surgery.

Catastrophic Failure of the Acetabular Polyethylene Liner in Ceramic-on-Polyethylene Total Hip Arthroplasty

R. Schwarzkopf, M. Mayor, G. Manzano, 2014, Journal of orthopaedic case reports.

An analysis of hylamer and polyethylene bearings from retrieved acetabular components.

J. Currier, M. Mayor, B. Currier, 1998, Orthopedics.

Analysis of Failed Ankle Arthroplasty Components

J. Nunley, P. Hecht, J. Currier, 2018, Foot & ankle international.

Modularity of Orthopedic Implants

M. Mayor, J. Parr, D. Marlowe, 1997 .

Osseointegration of titanium implants in total hip arthroplasty.

M. Mayor, J W McCutchen, J P Collier, 1990, Clinical orthopaedics and related research.

Comparison of Wear and Oxidation in Retrieved Conventional and Highly Cross-Linked UHMWPE Tibial Inserts.

J. Currier, D. V. Van Citters, M. Mayor, 2015, The Journal of arthroplasty.

Total Hip Arthroplasty Outcomes.

M. Mayor, 1999 .

Exercise, carbon dioxide and cystic fibrosis: a pilot study

M. Mayor, 1965 .

Ultrasonic assessment of early callus formation.

M. Mayor, S. Brown, 1976, Biomedical engineering.

Examination of Porous-Coated Patellar Components and Analysis of the Reasons for Their Retrieval

R. E. Jensen, M. Mayor, J. P. Collier, 1991 .