D. Lee

发表

The effects of nozzle diameter on impinging jet heat transfer and fluid flow

M. C. Jo, D. Lee, Jeong-Hun Song, 2004 .

Heat transfer characteristics of a micro-scale impinging slot jet

S. Kim, K. Choo, D. Lee, 2009 .

Technical NoteTurbulent heat transfer from a convex hemispherical surface to a round impinging jet

D. Lee, Y. Chung, M. Kim, 1999 .

Technical Note The effect of concave surface curvature on heat transfer from a fully developed round impinging jet

S. Won, D. Lee, Y. Chung, 1999 .

An Experimental Study of Heat Transfer Characteristics on the Electronic Module Arrangement

D. Lee, Jun-Sik Lee, D. Lee, 2008 .

Experimental Study of Ignition of a Gasoline–Air Mixture in a Constant‐Volume Combustion Chamber

D. Lee, Jeong-Hun Song, 2003 .

Measurements of the flow fields around two square cylinders in a tandem arrangement

Dong Keon Kim, D. Lee, M. Kim, 2008 .

Local heat transfer downstream of an asymmetric abrupt expansion and cavity in a circular tube

D. Lee, Hyun Jin Park, Seong Jung Kim, 2014 .

Experimental and numerical study of heat transfer downstream of an axisymmetric abrupt expansion and in a cavity of a circular tube

Jun-Sik Lee, D. Lee, Hyun Jin Park, 2011 .

Heat Transfer From a Flat Plate to a Fully Developed Axisymmetric Impinging Jet

S. Lee, R. Greif, D. Lee, 1995 .

Cross-flow effects on impingement array heat transfer with varying jet-to-target plate distance and hole spacing

H. Moon, P. Ligrani, Jun-Sik Lee, 2014 .

Heat Transfer Characteristics of a Pulsating Impinging Jet

Joon-Sik Lee, D. Lee, Eun-Hyun Lee, 2002 .

Technical Note Heat transfer characteristics of an axisymmetric jet impinging on the rib-roughened convex surface

Y. Chung, Joon-Sik Lee, Ju-Wan Lee, 1999 .

An instrument for measuring heat flux from an isothermal surface

D. Lee, Hyun Jin Park, S. Ahn, 2012 .

Effects of the Wire-screen Rib on Heat Transfer and Friction Factors

D. Lee, S. Ahn, S. Oh, 2011 .

Confined, milliscale unsteady laminar impinging slot jets and surface Nusselt numbers

P. Ligrani, Jun-Sik Lee, D. Lee, 2011 .

The effects of thermal boundary conditions on the heat transfer characteristics of laminar flow in milli-scale confined impinging slot jets

D. Lee, S. Han, Hyun Jin Park, 2021 .

The effects of the compressibility of the subsonic flow on heat transfer characteristics in a microscale impinging slot jet

D. Lee, S. Han, Hyun Jin Park, 2019, Journal of Mechanical Science and Technology.

Effects of hole shape on impingement jet array heat transfer with small-scale, target surface triangle roughness

Masa-aki Suzuki, P. Ligrani, D. Lee, 2018, International Journal of Heat and Mass Transfer.

Investigation of impingement surface geometry effects on heat transfer in a laminar confined impinging slot jet

D. Lee, S. Han, Yeonghwan Kim, 2017 .

Heat transfer with fully developed slot jets impinging on confined concave and convex surfaces

Y. H. Kim, D. Lee, Hyun Jin Park, 2015 .

Study of local heat transfer in a spirally fluted tube

D. Lee, Hyun Jin Park, S. Ahn, 2013 .

Effect of divergence ratio on heat transfer and friction factor in the ribbed rectangular channel

D. Lee, S. Ahn, Myungsung Lee, 2013 .

Confined, Milliscale Unsteady Laminar Impinging Slot Jets: Effects of Slot Width on Surface Stagnation Point Nusselt Numbers

P. Ligrani, D. Lee, Minhyoung Ryu, 2012 .

Milliscale confined impinging slot jets: Laminar heat transfer characteristics for an isothermal flat plate

P. Ligrani, D. Lee, Hyun Jin Park, 2012 .

Visualization and structure of confined, milliscale, unsteady impinging slot jets and associated vortices

P. Ligrani, D. Lee, Hyun Jin Park, 2012 .

Measurements of Local Nusselt Number with a Miniscale Laminar Confined Slot-Jet Impinging on a Flat Plate

D. Trainer, Jun-Sik Lee, D. Lee, 2011 .

An investigation of local heat transfer characteristics in a ventilated disc brake with helically fluted surfaces

Sung Bong Park, D. Lee, Kwangho Lee, 2007 .

Heat transfer enhancement by the perforated plate installed between an impinging jet and the target plate

S. Won, D. Lee, Y. Chung, 2002 .

Development of a Control Method of Traction Control System Using Vehicle Model

D. Lee, Jeonghoon Song, Heungseob Kim, 2004 .

Development of a highly efficient low-emission diesel engine-powered co-generation system and its optimization using Taguchi method

Jae Suk Park, Jeong Ho Park, Dae Hee Lee, 2013 .

Heat Transfer and Friction Factor in a Square Channel With One, Two, or Four Inclined Ribbed Walls

Dae Hee Lee, Soo Whan Ahn, D. Lee, 2008 .

Jet Impingement Heat Transfer on a Cylindrical Pedestal Encountered in Chip Cooling

Joon-Sik Lee, D. Lee, Y. Chung, 2003 .

Flow and heat transfer characteristics of a two-dimensional oblique wall attaching offset jet

Dae Hee Lee, D. Lee, S. Yoon, 2000 .

Local Heat Transfer Measurements Using Liquid Crystal Thermography Technique

Sung Bong Park, M. Jeon, D. Lee, 2006 .

Turbulent flow and heat transfer characteristics of a two-dimensional oblique plate impinging jet

Dae Hee Lee, D. Lee, S. Yoon, 1997 .

Turbulent flow and heat transfer measurements on a curved surface with a fully developed round impinging jet

Y. Chung, D. Lee, D. Kim, 1997 .

Turbulent heat transfer from a flat surface to a swirling round impinging jet

Dae Hee Lee, Young Suk Chung, Se Youl Won, 2002 .

A new liquid crystal color calibration technique using neural networks and median filtering

Dae Hee Lee, Se Youl Won, S. Won, 2000 .

Thin-film-heater thermal conductivity apparatus and measurement of thermal conductivity of silica aerogel

A. Hunt, D. Lee, R. Grief, 1996 .

Heat Exchange Efficiency Characteristics of EGR Cooler with Stack-Type or Shell &Tube-Type

Sangki Park, Hyung-Man Kim, Joon-Sik Lee, 2007 .

Effects of the Internal Shape of EGR Cooler on Heat Exchanger Efficiencies

Sangki Park, Hyung-Man Kim, Joon-Sik Lee, 2007 .