C. Xiao

发表

Evaluation of microstructural degradation in a failed gas turbine blade due to overheating

Q. Feng, Xiaotong Guo, Wei-Wei Zheng, 2019, Engineering Failure Analysis.

Role of Cobalt in the Microstructural Stability of Single Crystal Superalloys

C. Xiao, J. Chen, Xin Tang, 2016 .

The effects of Ta on the stress rupture properties and microstructural stability of a novel Ni-base superalloy for land-based high temperature applications

C. Xiao, Tung Lik Lee, M. Gorley, 2014 .

Microstructure and High Temperature Stress Rupture Properties of Ru-Containing Directionally Solidified Ni-Base Superalloy

C. Xiao, Liangfu Zheng, Shu Li, 2007 .

The oxidation performance of plasma-sprayed NiAl bond coat: Effect of Hf addition in bond coat and substrate

P. Xiao, Xin Wang, C. Xiao, 2018, Surface and Coatings Technology.

High Temperature Behaviors of a Casting Nickel-Based Superalloy Used for 815 °C

Ying-hong Peng, Changlin Yang, D. Shu, 2021, Materials.

Quantified Relation between Grain Boundary Angle and Interfacial Stability of PWA1484 Superalloy during Thermal Exposure

Qinjia Wang, C. Xiao, Jinxia Song, 2019, Metallurgical and Materials Transactions A.

Enhancement of high temperature low cycle fatigue lifetime of PWA1484 superalloy artificial bicrystals via boron-induced grain boundary strengthening

Qinjia Wang, Yidong Wu, C. Xiao, 2022, International Journal of Fatigue.

Tailoring the creep properties of second-generation Ni-based single crystal superalloys by composition optimization of Mo, W and Ti

Yidong Wu, C. Xiao, Qianyu Huo, 2021 .

Sulfidation resistance of CeO2-modified HVOF sprayed FeAl coatings at 700 °C

Weixing Chen, C. Xiao, 2006 .

Abnormal stress rupture property in K465 superalloy caused by microstructural degradation at 975 °C/225 MPa

K. Yagi, C. Xiao, Yunrong Zheng, 2016 .

Microstructure evolution of cobalt aluminide coating on nickel-based superalloys during exposure at 1050 °C

Limin He, C. Xiao, Jinxia Song, 2014 .

Brittle fracture of gas turbine blade caused by the formation of primary β-NiAl phase in Ni-base superalloy

C. Xiao, Liangfu Zheng, Guo-qing Zhang, 2012 .

Oxidation and microstructure evolution of cobalt aluminide coatings on directionally solidified superalloys during long term exposure at 1000°C

Q. Li, C. Xiao, W. Ren, 2014 .

Effect of yttrium on microstructure and properties of Ni3Al base alloy IC6

C. Xiao, Ya-fang Han, 2000 .

Effect of yttrium on diffusion layer of Ni-Al-Mo-B alloy IC6 during high temperature oxidation process

C. Xiao, Ya-fang Han, 1999 .

Enhanced creep resistance induced by minor Ti additions to a second generation nickel-based single crystal superalloy

Qinjia Wang, Shilei Li, Yidong Wu, 2022, Acta Materialia.

Automatic Identification and Quantitative Characterization of Primary Dendrite Microstructure Based on Machine Learning

Dandan Sun, Dongling Li, C. Xiao, 2021, Crystals.

Effect of Cr, Hf and temperature on interface reaction between nickel melt and silicon oxide core

C. Xiao, Jinxia Song, Qing Li, 2011 .

Improved Tensile Properties of Micro-grain Casting K447A Alloy

Yue Wang, Yue Wang, R. Liu, 2022, Metallurgical and Materials Transactions A.

Influences of W and Al on the Microstructure and Stress-Rupture Property of Re-Free Ni-Based Single Crystal Superalloys

C. Xiao, J. Chen, Xin Tang, 2017 .

The interdendritic-melt solidification control (IMSC) and its effects on the porosity and phase change of a Ni-based superalloy

D. Daisenberger, C. Xiao, J. Mi, 2014 .

Insight into the low cycle fatigue deformation mechanisms of minor element doping single crystal superalloys at elevated temperature

Qinjia Wang, Yidong Wu, C. Xiao, 2023, Scripta Materialia.

Low cycle fatigue behavior of micro-grain casting K4169 superalloy at room temperature

R. Liu, Xitao Wang, C. Xiao, 2022, Progress in Natural Science: Materials International.

Micro-mechanisms of Cyclic Plasticity at Stress Concentrations in a Ni-Based Single-Crystal Superalloy

J. Yu, M. Pham, F. Dunne, 2020 .

Study of precipitates due to the addition of silicon in yttrium modified Ni–Al–Mo–B alloy IC6

C. Xiao, Ya-fang Han, 2002 .

Quantitative microstructural evolution and corresponding stress rupture property of K465 superalloy

K. Yagi, C. Xiao, Yunrong Zheng, 2016 .

Influence of solution treatment on microstructure and stress rupture properties of K439 nickel-base superalloy

Cheng Jingyang, C. Xiao, Guangyu Yang, 2018, Atlas Journal of Materials Science.

Effect of directional solidification process on microstructure and stress rupture property of a hot corrosion resistant single crystal superalloy

C. Xiao, Qing Li, Jingyang Chen, 2019, China Foundry.

Effect of heat treatment on microstructure and mechanical properties of directionally solidified superalloy DZ12

C. Xiao, Jinxia Song, D. Tang, 2011 .

Modeling of the Effect of Secondary Orientation on the Micro Deformation Behavior of Ni-Based Single Crystal Superalloys

C. Xiao, Furong Liu, Jinxia Song, 2022, Metals.

Grain Refinement of Superalloy K4169 with Low-Voltage Pulsed Magnetic Field Treatment

C. Xiao, Xin Tang, L. Chen, 2013 .

Effect of LMC Processing Parameters on Casting Defects in Large-Scale Single Crystal IGT Blades

Lin Liu, Cheng Jingyang, C. Xiao, 2017 .

Evaluation of Temperature and Stress in First Stage High Pressure Turbine Blades of a Directionally‐Solidified Superalloy DZ125 after Service in Aeroengines

Y. D. Chen, C. Xiao, Yunrong Zheng, 2016 .

Primary α phase and its effect on the impact ductility of a high Cr content cast Ni-base superalloy

C. Xiao, Liangfu Zheng, Guo-qing Zhang, 2012 .

Microstructure and Mechanical Properties of Recycled Ni 3Al Base Alloy IC6

Shusuo Li, C. Xiao, Chuanlong Zang, 2002 .

Study on precipitates in Ni-Al-Mo-B alloy IC6 with addition of excess amount of yttrium

C. Xiao, Ya-fang Han, 1999 .

Effects of vacuum on gas content, oxide inclusions and mechanical properties of Ni-based superalloy using electron beam button and synchrotron diffraction

C. Tang, C. Xiao, M. Gorley, 2021 .

The DSC Investigation on Phase Transformations of Directionally Solidified (DS) and Powder Metallurgy (PM) Ni-Base Superalloys

Guo Qing Zhang, C. Tang, C. Xiao, 2018, Materials Science Forum.

Effects of Mechanical Vibration and Pouring Temperature on Solidified Structure of Superalloy K4169

C. Xiao, Xin Tang, L. Chen, 2013 .

Effect of silicon on microstructure and stress rupture properties at 1100°C of yttrium modified Ni-Al-Mo-B alloy IC6

C. Xiao, Y. F. Han, 2001 .

Development of directionally solidified Ni-Al-Mo-B-Y alloy IC6A

S. Li, C. Xiao, J. Song, 2003 .

Effect of yttrium on high temperature oxidation behavior of Ni-Al-Mo-B alloy IC6

C. Xiao, Y. F. Han, 2001 .

Effect of Ta on the Oxidation Resistance of a Cast Nickel-Base Die Material with Low Cr and High W Content

C. Xiao, Ya-fang Han, Qing Li, 2005 .

Repair of NiCrAlYSi overlay coating on Ni3Al base alloy IC6

Shusuo Li, C. Xiao, Jinxia Song, 2005 .