K. M. George

发表

Experimental Study to Assess the Effect of Electrode Bottom Profiles while Machining Inconel 718 through EDM Process

M. Manohar, D. Sivakumar, T. Selvaraj, 2014 .

Processing copper–carbon nanotube composite powders by high energy milling

S. R. Bakshi, N. Nayan, S. Murty, 2013 .

Microstructure and Properties of 15Cr‐5Ni‐1Mo‐1W Martensitic Stainless Steel

A. Jha, K. M. George, B. Pant, 2015 .

Processing of copper-carbon nanotube composites by vacuum hot pressing technique

S. R. Bakshi, N. Nayan, S. Murty, 2013 .

Characterization of the Electrical Discharge Machined M300 Maraging Steel Flexures Using Nanoindentation

Joji J. Chaman, K. M. George, P. Ramesh Narayanan, 2015 .

Microstructural and Mechanical Characterization of Alumina Coating on 07X16H6M Substrate

K. M. George, P. Ramesh Narayanan, J. Srinath, 2015 .

Studies on Dynamic Elastic and Internal Friction Properties of Cu-Cr-Zr-Ti Alloy Between 25 and 650 °C

K. M. George, K. Saravanan, P. Ramesh Narayanan, 2015, Journal of materials engineering and performance (Print).

Effect of Grain Boundary Alpha on Mechanical Properties of Ti5.4Al3Mo1V Alloy

A. Jha, K. M. George, S. K. Singh, 2015 .

Microstructure–texture–mechanical properties relationship in multi-pass warm rolled Ti–6Al–4V Alloy

N. Nayan, S. Murty, Pankaj Kumar, 2014 .

Achieving higher strength in Cu–Ag–Zr alloy by warm/hot rolling

A. Jha, K. M. George, B. Pant, 2017, Rare Metals.

Effect of Thermomechanical Treatment on the Environmentally Induced Cracking Behavior of AA7075 Alloy

K. M. George, Rahul Ghosh, V. S. Raja, 2015, Journal of Materials Engineering and Performance.

Mechanical properties of aluminium–copper–lithium alloy AA2195 at cryogenic temperatures

N. Nayan, S. Murty, G. Sastry, 2014 .

Processing and characterization of Al–Cu–Li alloy AA2195 undergoing scale up production through the vacuum induction melting technique

N. Nayan, S. Murty, G. Sastry, 2013 .

Low Cycle Fatigue Behavior of AA2219-T87 at Room Temperature

K. M. George, V. Sharma, G. S. Rao, 2014 .

Electrochemical Corrosion Behavior of Magnetron-Sputtered Al-Mo Gradient-Coated Steel in 3.5 wt.% NaCl Solution

K. M. George, P. Narayanan, A. Venugopal, 2016, Journal of Materials Engineering and Performance.

Microstructure and Properties of a High-Strength Cu-Ni-Si-Co-Zr Alloy

A. Jha, K. M. George, B. Pant, 2013, Journal of Materials Engineering and Performance.

Corrosion and Multi-Scale Mechanical Behaviour of Plasma Electrolytic Oxidation (PEO) and Hard Anodized (HA) Coatings on AA 2219 Aluminum Alloy

K. M. George, P. Ramesh Narayanan, J. Srinath, 2015 .

Properties and Strengthening Mechanisms in Cold-Rolled and Aged Cu–3Ag–0.5Zr Alloy

A. Jha, K. M. George, B. Pant, 2014, Metallography, Microstructure, and Analysis.

Analysis of Microstructure and Texture Evolution in Mg-3Al-1Zn Alloy Processed Through Groove Rolling

N. Nayan, S. Suwas, R. Madhavan, 2015, Journal of Materials Engineering and Performance.

Analysis of Phases and Their Role in Strengthening of Cu-Cr-Zr-Ti Alloy

A. Jha, K. M. George, B. Pant, 2015, Journal of Materials Engineering and Performance.

Enhanced Strength in Cu-Ag-Zr Alloy by Combination of Cold Working and Aging

A. Jha, K. M. George, B. Pant, 2014, Journal of Materials Engineering and Performance.

Microstructure and micro-texture evolution during large strain deformation of Inconel alloy IN718

N. Nayan, S. Murty, A. Jha, 2015 .

Closed Die Hammer Forging of Inconel 718

Abhay K. Jha, S.V.S. Narayana Murty, Bhanu Pant, 2014 .

Effect of Heat Treatment on the Microstructure and Hardness of 17Cr-0.17N-0.43C-1.7 Mo Martensitic Stainless Steel

A. Jha, K. M. George, B. Pant, 2015, Journal of Materials Engineering and Performance.

Effect of Heat Treatment on Microstructure and Mechanical Properties of 12Cr–10Ni–0.25Ti–0.7Mo Stainless Steel

A. Jha, K. M. George, B. Pant, 2013, Metallography, Microstructure, and Analysis.

Microstructure and micro-texture evolution during large strain deformation of an aluminium–copper–lithium alloy AA 2195

N. Nayan, S. Murty, A. Jha, 2015 .

Metallurgical Analysis of Defects in the Weld Joints of Large-Sized Maraging Steel Rocket Motor Casing

K. M. George, S. N. Narayana Murty, P. Ramesh Narayanan, 2014, Metallography, Microstructure, and Analysis.

On the Measurement of Dynamic Elastic and Internal Friction Properties of Nickel Based Super Alloys up to 650°C Temperature

K. M. George, K. Saravanan, P. Ramesh Narayanan, 2015 .

High-Temperature Deformation Processing Map Approach for Obtaining the Desired Microstructure in a Multi-component (Ni-Ti-Cu-Fe) Alloy

N. Nayan, S. Murty, A. Jha, 2015, Metallurgical and Materials Transactions A.

Hot deformation behaviour and microstructure control in AlCrCuNiFeCo high entropy alloy

U. Ramamurty, N. Nayan, S. Murty, 2014 .

Ambient and cryogenic tensile properties of AA2195T87 sheets with pre-aging cold work by a combination of cold rolling and stretching

K. S. Prasad, N. Nayan, S. Murty, 2013 .

Thermal Conductivity of Cu-Cr-Zr-Ti Alloy in the Temperature Range of 300-873K

A. Jha, K. M. George, B. Pant, 2012 .

Metallurgical Analysis of a Failed Through Bulkhead Initiator Used in Pyro Systems of Launch Vehicles

Sushant K. Manwatkar, K. M. George, S. N. Narayana Murty, 2015, Metallography Microstructure and Analysis.