C. Santiuste

发表

Numerical prediction of delamination in CFRP drilling

J. López-Puente, M. Miguélez, N. Feito, 2014 .

Dynamic analysis of bending-torsion coupled composite beams using the Flexibility Influence Function Method

S. Sanchez-Saez, C. Santiuste, E. Barbero, 2008 .

Machining FEM model of long fiber composites for aeronautical components

C. Santiuste, María Henar Miguélez, Xavier Soldani, 2010 .

This is a postprint version of the following published document: C. Santiuste, J. Díaz-Álvarez, X. Soldani, and H. Miguélez. Modelling thermal effects in machining of carbon fiber reinforced polymer

H. Miguélez, X. Soldani, J. Diaz-Alvarez, 2015 .

Theoretical Estimation of Thermal Effects in Drilling of Woven Carbon Fiber Composite

M. Miguélez, J. Diaz-Alvarez, C. Santiuste, 2014, Materials.

Modelling thermal effects in machining of carbon fiber reinforced polymer composites

H. Miguélez, H. Miguélez, X. Soldani, 2014 .

Compression after impact of flax/PLA biodegradable composites

J. Pernas-Sánchez, J. Artero-Guerrero, C. Santiuste, 2017 .

Application of the flexibility influence function method in the dynamic analysis of composite beams

E. Barbero, S. Sanchez-Saez, C. Santiuste, 2007 .

Three-Dimensional Modeling of Machining Processes

H. Miguélez, X. Soldani, C. Santiuste, 2012 .

Energy absorption and residual bending behavior of biocomposites bumper beams

C. Feng, C. Santiuste, A. Díaz-Álvarez, 2020 .

Experimental and numerical analysis of the influence of drill point angle when drilling biocomposites

M. Miguélez, J. Diaz-Alvarez, C. Santiuste, 2019, Composite Structures.

On the prediction of bolted single-lap composite joints

C. Santiuste, A. Olmedo, C. Santiuste, 2012 .

Analysis of low-velocity impact on flax/PLA composites using a strain rate sensitive model

T. Hoang, C. Santiuste, A. Rubio-López, 2018, Composite Structures.

Buckling and postbuckling of dielectric composite beam reinforced with Graphene Platelets (GPLs)

Jie Yang, Yu Wang, J. Yang, 2019, Aerospace Science and Technology.

Delamination prediction in orthogonal machining of carbon long fiber-reinforced polymer composites

C. Santiuste, H. Miguélez, X. Soldani, 2012 .

Numerical modelling of foam-cored sandwich plates under high-velocity impact

S. Sanchez-Saez, C. Santiuste, E. Barbero, 2011 .

Modelling impact behaviour of all-cellulose composite plates

C. Santiuste, A. Olmedo, C. Santiuste, 2015 .

Experimental analysis of drilling induced damage in biocomposites

M. Miguélez, C. Santiuste, A. Díaz-Álvarez, 2018 .

Drilling of biocomposite materials: Modelling and experimental validation

C. Santiuste, A. Díaz-Álvarez, Norberto Feito, 2021, Simul. Model. Pract. Theory.

On the Numerical Modeling of Flax/PLA Bumper Beams

J. A. Loya, C. Santiuste, L. Jiao-Wang, 2022, Materials.

Influence of cross-section on the impact and post-impact behavior of biocomposites bumper beams

J. A. Loya, C. Santiuste, L. Jiao-Wang, 2022, Mechanics of Advanced Materials and Structures.

Parametric Study on the Manufacturing of Biocomposite Materials

C. Santiuste, Á. Olmedo, A. Díaz-Álvarez, 2016 .

Manufacture of compression moulded PLA based biocomposites: A parametric study

C. Santiuste, Á. Olmedo, A. Díaz-Álvarez, 2015 .

A review on recent advances in numerical modelling of bone cutting.

Miguel Marco, Eugenio Giner, Carlos Santiuste, 2015, Journal of the mechanical behavior of biomedical materials.

FEM analysis of dynamic flexural behaviour of composite sandwich beams with foam core

C. Santiuste, S. Sánchez-Sáez, Inés Ivañez, 2010 .

Thermo-mechanical load interactions in foam cored axi-symmetric sandwich circular plates – high-order and FE models

Ole Thybo Thomsen, C. Santiuste, Yeoshua Frostig, 2011 .

Modelling of composite sandwich structures with honeycomb core subjected to high-velocity impact

C. Santiuste, S. Sánchez-Sáez, Brenda L. Buitrago, 2010 .

An analytical model for the secondary bending prediction in single-lap composite bolted-joints

C. Santiuste, Ever J. Barbero, A. Olmedo, 2014 .

Computational analysis of temperature effect in composite bolted joints for aeronautical applications

Enrique Barbero, Carlos Santiuste, C. Santiuste, 2011 .

A comparison of progressive-failure criteria in the prediction of the dynamic bending failure of composite laminated beams

C. Santiuste, S. Sánchez-Sáez, Ever J. Barbero, 2010 .

Processing and Mechanical Properties of the Workpiece in Machining of Long-Fiber-Reinforced Composites

M. Miguélez, X. Soldani, C. Santiuste, 2012 .

The influence of anisotropy in numerical modeling of orthogonal cutting of cortical bone

C. Santiuste, Eugenio Giner, H. Miguélez, 2014 .

Constitutive model to predict the viscoplastic behaviour of natural fibres based composites

T. Hoang, C. Santiuste, A. Rubio-López, 2016 .

2D and 3D approaches to simulation of metal and composite cutting

N. C. Marín, H. Miguélez, X. Soldani, 2012 .

Use of Artificial Neural Networks to Optimize Stacking Sequence in UHMWPE Protections

C. Santiuste, Á. Olmedo, L. Jiao-Wang, 2021, Polymers.

Influence Of Stacking Sequence On The Impact Behaviour Of Uhmwpe Soft Armor Panels

C. Santiuste, 2020, Composite structures.

Numerical analysis of the ballistic behaviour of Kevlar® composite under impact of double-nosed stepped cylindrical projectiles

H. Miguélez, M. Marco, C. Santiuste, 2016 .

Perforation of Composite Laminate Subjected to Dynamic Loads

S. Sanchez-Saez, C. Navarro, C. Santiuste, 2013 .

An analytical model for predicting the stiffness and strength of pinned-joint composite laminates

C. Santiuste, Á. Olmedo, E. Barbero, 2014 .

Out-of-plane failure mechanisms in LFRP composite cutting

C. Santiuste, H. Miguélez, X. Soldani, 2011 .

Influence of tool geometry and numerical parameters when modeling orthogonal cutting of LFRP composites

C. Santiuste, María Henar Miguélez, X. Soldani, 2011 .

Residual flexural strength after low-velocity impact in glass/polyester composite beams

C. Santiuste, S. Sánchez-Sáez, Ever J. Barbero, 2010 .

using a strain rate sensitive model

C. Santiuste, A. Rubio-López, E. Jalon, 2020 .

Numerical prediction of delamination in CFRP drilling

J. López-Puente, N. Feito, C. Santiuste, 2014 .