Ekrem Oezkaya

发表

Finite element simulations of cutting force, torque, and temperature in drilling of Inconel 718

A. Çiçek, K. Aslantaş, Necati Uçak, 2019, Procedia CIRP.

Experimental and computational investigations on the effects of deep-temperature emulsion on the turning of Inconel 718 alloy

A. Shokrani, D. Biermann, A. de Bartolomeis, 2020 .

A new reverse engineering method to combine FEM and CFD simulation three-dimensional insight into the chipping zone during the drilling of Inconel 718 with internal cooling

D. Biermann, Ekrem Oezkaya, 2018 .

Analysis of the cutting fluid behavior with a modified micro single-lip deep hole drilling tool

P. Eberhard, D. Biermann, Ekrem Oezkaya, 2022, CIRP Journal of Manufacturing Science and Technology.

Geometry modifications of single-lip drills to improve cutting fluid flow

P. Eberhard, D. Biermann, Ekrem Oezkaya, 2022, The International Journal of Advanced Manufacturing Technology.

Chip formation simulation and analysis of the mechanical loads during micro single-lip deep hole drilling of Inconel 718 with varying cooling lubricant pressure

D. Biermann, Ekrem Oezkaya, S. Michel, 2021 .

A Mathematical Model to Describe the Inner Contour of Moineau Stators

D. Biermann, Ekrem Oezkaya, M. Fuss, 2021 .

Simulative analyses focused on the changes in cutting fluid supply of twist drills with a modified flank face geometry

D. Biermann, Ekrem Oezkaya, M. Bücker, 2020 .

A New Flank Face Design Leading to an Improved Process Performance when Drilling High-Temperature Nickel-Base Alloys

D. Biermann, Ekrem Oezkaya, M. Bücker, 2020 .

Fluid structure interaction (FSI) modelling of deep hole twist drilling with internal cutting fluid supply

D. Biermann, Ekrem Oezkaya, I. Iovkov, 2019, CIRP Annals.

Development of a three-dimensional finite element method simulation model to predict modified flow drilling tool performance

D. Biermann, Ekrem Oezkaya, Stefan Hannich, 2018, International Journal of Material Forming.

Development of a three-dimensional finite element method simulation model to predict modified flow drilling tool performance

D. Biermann, Ekrem Oezkaya, Stefan Hannich, 2018, International Journal of Material Forming.

Experimental studies and CFD simulation of the internal cooling conditions when drilling Inconel 718

Dirk Biermann, Ekrem Oezkaya, Nicolas Beer, 2016 .

A thermomechanical analysis leading to a novel flank face design providing longer tool lives for tools used in the drilling of Inconel 718

D. Biermann, Ekrem Oezkaya, M. Bücker, 2019, The International Journal of Advanced Manufacturing Technology.

Experimental studies and FEM simulation of helical-shaped deep hole twist drills

Dirk Biermann, Sebastian Michel, Ekrem Oezkaya, 2018, Prod. Eng..

Experimental studies and FEM simulation of helical-shaped deep hole twist drills

D. Biermann, Ekrem Oezkaya, S. Michel, 2017, Production Engineering.

Cutting-fluid flow with chip evacuation during deep-hole drilling with twist drills

Peter Eberhard, Dirk Biermann, Andreas Baumann, 2021 .

Development of a geometrical torque prediction method (GTPM) to automatically determine the relative torque for different tapping tools and diameters

Dirk Biermann, Ekrem Oezkaya, D. Biermann, 2018 .

Segmented and mathematical model for 3D FEM tapping simulation to predict the relative torque before tool production

Dirk Biermann, Ekrem Oezkaya, D. Biermann, 2017 .

Development of a geometrical torque prediction method (GTPM) to automatically determine the relative torque for different tapping tools and diameters

D. Biermann, Ekrem Oezkaya, 2018, The International Journal of Advanced Manufacturing Technology.

CFD simulation for internal coolant channel design of tapping tools to reduce tool wear

Dirk Biermann, Ekrem Oezkaya, D. Biermann, 2017 .

Experimental and computational analysis of the coolant distribution considering the viscosity of the cutting fluid during machining with helical deep hole drills

D. Biermann, Ekrem Oezkaya, S. Michel, 2022, Advances in Manufacturing.