Tadao Tsukada

发表

An In-line Digital Filtering for the Real-time Processing of the Surface Roughness Profiles (1st Report) : An Application of Running-Box-Function Filter

Seiichiro Hara, Tadao Tsukada, Kazuyuki Sasajima, 1997 .

Seeing through precision engineering. Incubation in new field of technology.

Tadao Tsukada, 1989 .

A Study on Evaluation of Circularity and Related Features for Eccentric Cam Shaft (1st Report) -Development of Algorithm and Its Simulation-

Tadao Tsukada, Yu Dahai, 1992 .

Measurement of surface roughness with small waviness by contact stylus instrument correcting specimen orientation

Tadao Tsukada, Nahmgyoo Cho, Masaaki Takahashi, 1993 .

Evaluation method to determine radial accuracy of high-precision rotating spindle units

Atsushi Sakamoto, Tadao Tsukada, Shoji Noguchi, 1995 .

A Relocation Technique of Surface Asperity Profiles for Evaluating Truncated Surface. (2nd Report). Based on Statistical Values of Two-dimensional Profiles.

Tadao Tsukada, Kazuyuki Sasajima, Kazuya Naoi, 1999 .

An in-line digital filtering algorithm for surface roughness profiles

Seiichiro Hara, Tadao Tsukada, Kazuyuki Sasajima, 1998 .

General Tolerancing in Design Object Modeling.

Tadao Tsukada, Masatoshi Ito, Taro Hirosue, 1996 .

A study on evaluation of circularity and related features for eccentric cam shaft (2nd report) : measured results and discussion

Tadao Tsukada, Yu Dahai, Yu Dahai, 1995 .

An In-line Digital Filtering for the Real-time Processing of the Surface Roughness Profiles (2nd Report) : A Trial to Eliminate Aliasing of Short Wave-length Signal

Seiichiro Hara, Tadao Tsukada, Kazuyuki Sasajima, 1997 .

Sensor for Machined Part Accuracy and Measured Data Processing( Present Status of Sensors for Machining)

Tadao Tsukada, 1986 .

Experimental Study on the Instantaneous Cutting Forces in Metal Cutting with Oscillating Tools

Junichiro Kumabe, Masami Masuko, Tadao Tsukada, 1966 .

Correction of Specimen Orientation in Three-Dimensional Measurement of Surface Roughness with Small Waviness by Contact Stylus Instrument (1st Report) -Theoretical Foundation-

Tadao Tsukada, Nahmgyoo Cho, Masaaki Takahashi, 1995 .

The development of a computer-aided centring and levelling system for cylindrical form measurement

Tadao Tsukada, Tohru Kanada, Shu Kui Liu, 1988 .

A development of three-dimensional surface measurement on cylinder

Tadao Tsukada, Kazuyuld Sasajima, 1998 .

Correction of specimen orientation in three-dimensional measurement of surface roughness with small waviness by contact stylus instrument (2nd report) : simulation and experimental verification

Tadao Tsukada, M. Takahashi, N. Cho, 1994 .

A Three-Dimensional Measuring Technique for Surface Asperities

Tadao Tsukada, Kazuyuki Sasajima, 1981 .

A software-based relocation technique for surface asperity profiles and its application to calculate volume changes in running-in wear

Tadao Tsukada, Kazuyuki Sasajima, Kazuya Naoi, 2000 .

The Conditions to Apply the Phase Corrected Filter to Traced Profiles for Roughness Profiles (1st Report)

Tadao Tsukada, Seiichiro Hara, Masatoshi Ito, 1996 .

An optimum sampling interval for digitizing surface asperity profiles

Tadao Tsukada, Kazuyuki Sasajima, T. Tsukada, 1982 .

An Evaluation Method of Radial Accuracy for Ultrahigh Precision Air Spindle.

Tadao Tsukada, Shoji Noguchi, Atsushi Sakamoto, 1992 .

A verification technique of minimum zone conical taper form

Tadao Tsukada, Tohru Kanada, T. Kanada, 1988 .

Evaluation of two- and three-dimensional surface roughness profiles and their confidence

Tadao Tsukada, Tohru Kanada, T. Kanada, 1986 .

Uncertainty of wavelength limitation due to stylus tip radius for engineering surface texture based on wavelength and amplitude by FFT

Tadao Tsukada, Ichiro Yoshida, T. Tsukada, 2006 .