D. Nguyen

发表

Parallel Computation of the Jacobian Matrix for Nonlinear Equation Solvers Using MATLAB

Duc T. Nguyen, Brett Newman, Geoffrey K. Rose, 2017 .

Ductile Fracture Prediction in Rotational Incremental Forming for Magnesium Alloy Sheets Using Combined Kinematic/Isotropic Hardening Model

Duc-Toan Nguyen, Young-Suk Kim, Jingee Park, 2010 .

A study on spring-back in U-draw bending of DP350 high-strength steel sheets based on combined isotropic and kinematic hardening laws

V. Tong, D. Nguyen, 2018, Advances in Mechanical Engineering.

Uncoupled ductile fracture criterion considering secondary void band behaviors for failure prediction in sheet metal forming

Young-Suk Kim, D. Nguyen, Jinjae Kim, 2020 .

Simulation and experimental studies to verify the effect of cutting parameters on chip shrinkage coefficient and cutting forces in machining of A6061 aluminum alloy

V. Tong, D. Nguyen, Thi-Hoa Pham, 2016 .

A Study on Modified Maximum Force Criterion to Predict Forming Limit Curve of Stainless Steel Sheet

D. Jung, D. Nguyen, T. Banh, 2011 .

A Study on Yield Function for Ti–6Al–4V Titanium Alloy Sheets at Elevated Temperatures

Duc-Toan Nguyen, Young-Suk Kim, Young-Suk Kim, 2016, Transactions of the Indian Institute of Metals.

A comparative investigation on theoretical models for forming limit diagram prediction of automotive sheet metals

Young-Suk Kim, D. Nguyen, Q. Pham, 2021, Mechanics Based Design of Structures and Machines.

Parameter Identification of Chaboche Model for Aluminum Alloy Sheets Based on Differential Evolution Algorithm

D. Nguyen, Q. Pham, 2022, J. Adv. Eng. Comput..

Finite element method study to predict spring-back in roll-bending of pre-coated material and select bending parameters

D. Jung, D. Nguyen, Young-Suk Kim, 2012, International Journal of Precision Engineering and Manufacturing.

Finite element method study to predict spring-back in roll-bending of pre-coated material and select bending parameters

Dong-Won Jung, Young-Suk Kim, Duc-Toan Nguyen, 2012, International Journal of Precision Engineering and Manufacturing.

A Study for Improved Prediction of the Cutting Force and Chip Shrinkage Coefficient during the SKD11 Alloy Steel Milling

D. Nguyen, Thi-Bich Mac, The-Thanh Luyen, 2022, Machines.

Assessment of the Effect of Thermal-Assisted Machining on the Machinability of SKD11 Alloy Steel

D. Nguyen, Thi-Bich Mac, The-Thanh Luyen, 2023, Metals.

Optimization of Surface Roughness and Vibration During Thermal—Assisted Milling SKD11 Steel Using Taguchi Method

D. Nguyen, B. Long, Thi-Bich Mac, 2020 .

Application of TGRA-Based Optimisation for Machinability of High-Chromium Tool Steel in the EDM Process

T. Muthuramalingam, P. Nguyen, D. Nguyen, 2020 .

Experimental study on the chip morphology, tool–chip contact length, workpiece vibration, and surface roughness during high-speed face milling of A6061 aluminum alloy

V. Tong, D. Nguyen, Thi-Hoa Pham, 2020, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.

Improving formability of tube bending for a copper material using finite element simulation

Young-Suk Kim, Duc-Toan Nguyen, Dinh-Thanh Nguyen, 2015 .

Characteristics optimization of powder mixed electric discharge machining using titanium powder for die steel materials

C. Ngo, D. Nguyen, H. Nguyen, 2018 .

A numerical and experimental study on the hold-edge conditions and hole-expansion ratio of hole-blanking and hole-expansion tests for ferrite bainite steel (FB590) sheets

V. Tong, D. Nguyen, 2020, Ironmaking & Steelmaking.

Flow stress equations of Ti-6Al-4V titanium alloy sheet at elevated temperatures

Young-Suk Kim, D. Jung, D. Nguyen, 2012 .

Application of TGRA-Based Optimisation for Machinability of High-Chromium Tool Steel in the EDM Process

T. Muthuramalingam, P. Nguyen, D. Nguyen, 2020, Arabian Journal for Science and Engineering.

Investigating the impact of yield criteria and process parameters on fracture height of cylindrical cups in the deep drawing process of SPCC sheet steel

D. Nguyen, T. Banh, Thi-Bich Mac, 2023, The International Journal of Advanced Manufacturing Technology.

A study of combined finite element method simulation/experiment to predict forming limit curves of steel DP350 sheets

D. Nguyen, V. Do, Thi-Bich Mac, 2018 .

A numerical study on establishing the forming limit curve and indicating the formability of complex shape in incremental sheet forming process

Young-Suk Kim, Duc-Toan Nguyen, Young-Suk Kim, 2013 .

A numerical study on establishing the forming limit curve and indicating the formability of complex shape in incremental sheet forming process

D. Nguyen, Young-Suk Kim, Duc-Toan Nguyen, 2013, International Journal of Precision Engineering and Manufacturing.

A New Constitutive Model for AZ31B Magnesium Alloy Sheet Deformed at Elevated Temperatures and Various Strain Rates

D. Nguyen, 2014 .

A path following method for identifying static equilibrium in multi-body-dynamic systems

Duc T. Nguyen, Brett Newman, Geoffrey K. Rose, 2019 .

Implementing an arc-length method for a robust approach in solving systems of nonlinear equations

Geoffrey K. Rose, B. Newman, D. Nguyen, 2016, SoutheastCon 2016.

A simulation and experimental study on the deep drawing process of SPCC sheet using the graphical method

Van-Canh Tong, The-Thanh Luyen, Duc-Toan Nguyen, 2021, Alexandria Engineering Journal.

Graphical method based on modified maximum force criterion to indicate forming limit curves of 22MnB5 boron steel sheets at elevated temperatures

D. Nguyen, T. Banh, Q. Pham, 2021, Journal of Iron and Steel Research International.

Flow stress equations of Ti-6Al-4V titanium alloy sheet at elevated temperatures

D. Jung, D. Nguyen, Young-Suk Kim, 2012, International Journal of Precision Engineering and Manufacturing.

A study on heating and determining the temperature generation on the sheet metal before the deep drawing process

D. Nguyen, T. Banh, Thi-Bich Mac, 2020 .