S. Spence

发表

An experimental investigation into the pressure drop for turbulent flow in 90° elbow bends

N. Crawford, G. Cunningham, S. Spence, 2007 .

A numerical investigation of the flow structures and losses for turbulent flow in 90° elbow bends

N. Crawford, G. Cunningham, S. Spence, 2009 .

Investigation of the effects of flow conditions at rotor inlet on mixed flow turbine performance for automotive applications

D. Filsinger, R. Morrison, S. Spence, 2016 .

An Assessment Of Stator Vane Leakage In A Variable Geometry Radial Turbine

Stephen Spence, Geoffrey Cunningham, G. Cunningham, 2005 .

A comprehensive review on countermeasures for CO2 emissions from ships

S. Spence, Huilei Xing, Hua Chen, 2020 .

Review of Thermal Recovery Technologies for the Clearwater and Lower Grand Rapids Formations in the Cold Lake Area in Alberta

S. Spence, Qi Jiang, J. Russel-Houston, 2009 .

Numerical analysis of the effects of circumferential groove casing suction in a counter-rotating axial ﬂow compressor

T. Liang, Bo Liu, S. Spence, 2020 .

An Investigation of Centrifugal Compressor Stability Enhancement Using a Novel Vaned Diffuser Recirculation Technique

K. Vogel, S. Spence, R. Hunziker, 2018, Journal of Turbomachinery.

Performance enhancement of a centrifugal compressor stage using profiled end wall (PEW) treatments in the radial vaned diffuser

W. Chu, G. An, J. Lang, 2021 .

High Dimensional Matching Optimization of Impeller–Vaned Diffuser Interaction for a Centrifugal Compressor Stage

Y. Ju, Chuhua Zhang, S. Spence, 2020 .

A Heuristic Approach to Dynamic Design Space Definition for NLF Aerofoil Optimisation

J. Early, L. Cameron, R. McRoberts, 2011 .

Numerical and Experimental Investigation of the Impact of Mixed Flow Turbine Inlet Cone Angle and Inlet Blade Angle

D. Filsinger, A. Starke, S. Spence, 2019, Journal of Turbomachinery.

Numerical and experimental investigation of a radially reduced diffuser design concept for a centrifugal compressor performance at design point.

S. Spence, D. Rusch, M. Geron, 2022 .

Fuel Cell Power Systems for Maritime Applications: Progress and Perspectives

S. Spence, C. Stuart, Huilei Xing, 2021 .

Investigation of Utilizing Single Surface Depressions in Optimization of NLF Aerofoil Design

Juliana Early, Richard McRoberts, Stephen Spence, 2010 .

Investigation of Utilizing a Single Surface Depression in the Optimisation of NLF Aerofoil Design

J. Early, H. Medina, R. McRoberts, 2010 .

Alternative fuel options for low carbon maritime transportation: Pathways to 2050

S. Spence, C. Stuart, Huilei Xing, 2021 .

Whole-Vehicle modelling of exhaust energy recovery on a diesel-electric hybrid bus

Geoffrey McCullough, Roy Douglas, Ian Briggs, 2014 .

Waste heat recovery on a diesel-electric hybrid bus using a turbogenerator

Ian Briggs, Geoffrey McCullough, Roy Douglas, 2012 .

Numerical investigation into the mechanism regarding the inception and evolution of flow unsteadiness induced by the tip leakage flow in a transonic compressor

Zhiyang Chen, Yanhui Wu, G. An, 2020 .

Effect of Film Cooling on Entropy Noise Generation in a Stator Blade Row

M. Huet, Y. Mahmoudi, Rob Watson, 2021, AIAA Journal.

Numerical Investigation into the Effects of Tip Clearance on the Performance of a Counter-Rotating Axial Flow Compressor

X. Mao, S. Spence, B. Liu, 2020, Journal of Applied Fluid Mechanics.

Experimental performance evaluation of a 99.0 mm radial inflow nozzled turbine at larger stator-rotor throat area ratios

Stephen Spence, David Artt, S. Spence, 1999 .

A Comparison of the Flow Structures and Losses Within Vaned and Vaneless Stators for Radial Turbines

Alister Simpson, Stephen Spence, John Watterson, 2009 .

An experimental assessment of incidence losses in a radial inflow turbine rotor

David Artt, Stephen Spence, S. Spence, 1998 .

An Experimental Assessment of the Effects of Stator Vane Tip Clearance Location and Back Swept Blading on an Automotive Variable Geometry Turbocharger

Stephen Spence, Jason Walkingshaw, Jan Ehrhard, 2012 .

Design, analysis and performance of a polymer–carbon nanotubes based economic solar collector

S. Spence, S. Kim, C. Boyle, 2016 .

Aerodynamic performance of a bypass engine with fan nozzle exit area change by warped chevrons

Jian Wang, Srinivasan Raghunathan, Stephen Spence, 2010 .

Investigation of heat exchanger inclination in forced-draught air-cooled heat exchangers

Juliana Early, Ian J. Kennedy, Stephen Spence, 2012 .

Numerical and Experimental Study of the Performance Effects of Varying Vaneless Space and Vane Solidity in Radial Turbine Stators

Alister Simpson, Stephen Spence, John Watterson, 2013 .

Intermittent breakdown of the tip leakage vortex and the resultant flow unsteadiness in the tip-region of a subsonic compressor cascade

Fan Yang, Yanhui Wu, Bozhe Wang, 2021 .

An investigation of the stability enhancement of a centrifugal compressor stage using a porous throat diffuser

Sung In Kim, Stephen Spence, Daniel Rusch, 2017 .

Experimental and Numerical Benchmarking of an Improved Meanline Modelling Method for Automotive Turbocharger Centrifugal Compressors

Michael Dietrich, Dietmar Filsinger, Juliana Early, 2015 .

An Experimental Investigation into the Pressure Drop for Turbulent Flow 90º Elbow Bends

N. Crawford, S. Spence, G. Cunningham, 2020 .

Design, construction and testing of an air-cycle refrigeration system for road transport

Stephen Spence, David Artt, S. Spence, 2004 .

Experimental performance evaluation of a 99.0 mm radial inflow nozzled turbine with different stator throat areas

David Artt, Stephen Spence, S. Spence, 1997 .

The technical merits of turbogenerating shown through the design, validation and implementation of a one-dimensional engine model

David Thornhill, Ian GM Thompson, Stephen W Spence, 2014 .

Design, analysis and performance of a polymer–carbon nanotubes based economic solar collector

S. Spence, S. Kim, C. Boyle, 2016 .

Metamodel-Driven Data Mining Model to Support Three-Dimensional Design of Centrifugal Compressor Stage

Stephen Spence, Yaping Ju, Chuhua Zhang, 2021, Journal of Turbomachinery.

Using AI for Loss Prediction in a Hybrid Meanline Modelling Method to Deliver Improved Turbocharger Map Prediction

S. Spence, C. Stuart, Ryosuke Inomata, 2021 .

Computational Investigation of Inlet Distortion at High Angles of Attack

John Richardson, Stephen Spence, Theresa Robinson, 2014 .

A Three-Zone Modeling Approach for Centrifugal Compressor Slip Factor Prediction

D. Filsinger, A. Starke, S. Spence, 2019, Journal of Turbomachinery.

Characterizing the Influence of Impeller Exit Recirculation on Centrifugal Compressor Work Input

D. Filsinger, A. Starke, S. Spence, 2018 .