Jonathan A. Harris

发表

In Vitro Analysis of Accuracy, Dosage and Surgical Time Required for Pedicle Screw Placement Using Conventional Percutaneous Screw and Robotic-Assisted Screw Techniques

N. Crawford, P. Passias, A. Vaccaro, 2017 .

Guidelines for cortical screw versus pedicle screw selection from a fatigued decompressive lumbar laminectomy model show similar stability and less bone mineral density dependency.

Jonathan A. Harris, B. Bucklen, K. Radcliff, 2020, Clinical biomechanics.

In Vitro Biomechanical and Fluoroscopic Study of a Continuously Expandable Interbody Spacer Concerning Its Role in Insertion Force and Segmental Kinematics

Jonathan A. Harris, B. Bucklen, Joel A Torretti, 2018, Asian spine journal.

Does pedicle screw fixation of the subaxial cervical spine provide adequate stabilization in a multilevel vertebral body fracture model? An in vitro biomechanical study

Mir M. Hussain, Jonathan A. Harris, B. Bucklen, 2018, Clinical biomechanics.

Stabilizing effect of the rib cage on adjacent segment motion following thoracolumbar posterior fixation of the human thoracic cadaveric spine: A biomechanical study.

R. Hart, Jonathan A. Harris, B. Bucklen, 2019, Clinical biomechanics.

Single-Level In Vitro Kinematic Comparison of Novel Inline Cervical Interbody Devices With Intervertebral Screw, Anchor, or Blade

P. Arnold, Mir M. Hussain, Jonathan A. Harris, 2019, Global spine journal.

Answer to the Letter to the Editor of T. B. Grivas concerning “A comprehensive review of thoracic deformity parameters in scoliosis” by Harris JA, et al. Eur Spine J (2014): DOI 10.1007/s00586-014-3580-8

Jonathan A. Harris, 2015, European Spine Journal.

A comprehensive review of thoracic deformity parameters in scoliosis

S. Balasubramanian, Jonathan A. Harris, Suken A. Shah, 2014, European Spine Journal.

Assessment of Surgical Procedural Time, Pedicle Screw Accuracy, and Clinician Radiation Exposure of a Novel Robotic Navigation System Compared With Conventional Open and Percutaneous Freehand Techniques: A Cadaveric Investigation

N. Crawford, P. Passias, A. Vaccaro, 2019, Global spine journal.

Selecting the lowest instrumented vertebra in a multilevel posterior cervical fusion across the cervicothoracic junction: a biomechanical investigation.

R. Yassari, Jonathan A. Harris, B. Bucklen, 2022, Journal of neurosurgery. Spine.

Evaluation of Two Novel Integrated Stand-Alone Spacer Designs Compared with Anterior and Anterior-Posterior Single-Level Lumbar Fusion Techniques: An In Vitro Biomechanical Investigation

Mir M. Hussain, Jonathan A. Harris, B. Bucklen, 2017, Asian spine journal.

Comprehensive In Silico Evaluation of Accessory Rod Position, Rod Material and Diameter, Use of Cross-connectors, and Anterior Column Support in a Pedicle Subtraction Osteotomy Model: Part II: Effects on Lumbosacral Rod and Screw Strain.

D. Gelb, S. Ludwig, D. Amin, 2020, Spine.

Impaction grafting of lumbar pedicle defects: a biomechanical study of a novel technique for pedicle screw revision.

F. Shen, Jonathan A. Harris, B. Bucklen, 2022, Journal of neurosurgery. Spine.

Kinematic efficacy of supplemental anterior lumbar interbody fusion at lumbosacral levels in thoracolumbosacral deformity correction with and without pedicle subtraction osteotomy at L3: an in vitro cadaveric study

Jonathan A. Harris, B. Bucklen, M. Moldavsky, 2017, European Spine Journal.

Long fusion correction of degenerative adult spinal deformity and the selection of the upper or lower thoracic region as the site of proximal instrumentation: a systematic review and meta-analysis

Y. Chi, Xiao-lei Sun, Jonathan A. Harris, 2016, BMJ Open.

Comprehensive Evaluation of Accessory Rod Position, Rod Material and Diameter, Use of Cross-connectors, and Anterior Column Support in a Pedicle Subtraction Osteotomy Model: Part I: Effects on Apical Rod Strain: An In Vitro and In Silico Biomechanical Study.

D. Gelb, S. Ludwig, D. Amin, 2020, Spine.

Use of Supplemental Short Pre-Contoured Accessory Rods and Cobalt Chrome Alloy Posterior Rods Reduces Primary Rod Strain and Range of Motion Across the Pedicle Subtraction Osteotomy Level: An In Vitro Biomechanical Study

Jonathan A. Harris, B. Bucklen, A. Wu, 2016, Spine.

Rod Strain After Pedicle Subtraction Osteotomy: A Biomechanical Study.

Jonathan A. Harris, B. Bucklen, A. Wu, 2016, Spine.

The effect of anterior longitudinal ligament resection on lordosis correction during minimally invasive lateral lumbar interbody fusion: Biomechanical and radiographic feasibility of an integrated spacer/plate interbody reconstruction device

Choll W. Kim, Jonathan A. Harris, B. Bucklen, 2017, Clinical biomechanics.

Lumbar Intervertebral Spacer With Cement Augmentation of Endplates and Integrated Screws as a Fixation Device in an Osteoporotic Model: An In Vitro Kinematic and Load-to-Failure Study

Jonathan A. Harris, B. Bucklen, Rayshad Oshtory, 2019, International Journal of Spine Surgery.

Load-to-Failure Study Osteoporotic Model: An In Vitro Kinematic and Endplates and Integrated Screws as a Fixation Device in an Lumbar Intervertebral Spacer With Cement Augmentation of

Jonathan A. Harris, B. Bucklen, Rayshad Oshtory, 2021 .

Biomechanical Investigation of a Novel Revision Device in an Osteoporotic Model: Pullout Strength of Pedicle Screw Anchor Versus Larger Screw Diameter

F. La Marca, Mir M. Hussain, Jonathan A. Harris, 2015, Clinical spine surgery.

Short Segment Spinal Instrumentation With Index Vertebra Pedicle Screw Placement for Pathologies Involving the Anterior and Middle Vertebral Column Is as Effective as Long Segment Stabilization With Cage Reconstruction: A Biomechanical Study

Jonathan A. Harris, B. Bucklen, Yiwei Cai, 2015, Spine.

Biomechanical Evaluation Comparing Zero-Profile Devices Versus Fixed Profile Systems in a Cervical Hybrid Decompression Model A Biomechanical In Vitro Study.

R. Yassari, Jonathan A. Harris, B. Bucklen, 2020, The spine journal : official journal of the North American Spine Society.

Biomechanical properties of posterior transpedicular–transdiscal oblique lumbar screw fixation with novel trapezoidal lateral interbody spacer: an in vitro human cadaveric model

Y. Chi, Jonathan A. Harris, B. Bucklen, 2017, European Spine Journal.

A Dual-Screw Technique for Vertebral Compression Fractures via Robotic Navigation in the Osteopenic Lumbar Spine: An In-Vitro Biomechanical Analysis.

M. Steinmetz, Jonathan A. Harris, B. Bucklen, 2023, Global spine journal.

Fixation Strength of Modified Iliac Screw Trajectory Compared to Traditional Iliac and S2 Alar-Iliac Trajectories: A Cadaveric Study.

J. Chapman, T. Schildhauer, D. Amin, 2021, World neurosurgery.

The role of sacral slope in lumbosacral fusion: a biomechanical study.

D. Drazin, J. P. Johnson, Mir M. Hussain, 2015, Journal of neurosurgery. Spine.

Biomechanical evaluation of traditional posterior versus anterior spondylolisthesis reduction in a cadaveric grade I slip model.

D. Drazin, Mir M. Hussain, Jonathan A. Harris, 2019, Journal of neurosurgery. Spine.

Lumbar Percutaneous Pedicle Screw Breach Rates

A. Vaccaro, Jonathan A. Harris, B. Bucklen, 2020, Clinical spine surgery.

Bridge Plate Design Effects on Yield and Fatigue in Distal Radius Fracture Model

Jonathan A. Harris, B. Bucklen, Wenhai Wang, 2020, Journal of Wrist Surgery.

Biomechanical investigation of potential prophylactic scoliosis treatments following various sizes of chest wall resection.

Jonathan A. Harris, B. Bucklen, Rex A. W. Marco, 2021, Clinical biomechanics.