Leok Poh Chua

发表

Development of techniques for making hot-wire probes and a portable hot-wire calibration device

Chang Yu Liu, Leok Poh Chua, 1992 .

Investigation of the stall delay of a 5kW horizontal axis wind turbine using numerical method

Leok Poh Chua, Hsiao Mun Lee, 2012 .

Advanced aerospace research on the new generation of turbo-fan engine exhaust mixer.

Leok Poh Chua, W. K. Chan, Simon Ching Man. Yu, 2005 .

Numerical investigation and identification of susceptible sites of atherosclerotic lesion formation in a complete coronary artery bypass model

Dhanjoo N. Ghista, Jun-Mei Zhang, Leok Poh Chua, 2008, Medical & Biological Engineering & Computing.

Numerical study on the impeller of an axial flow blood pump

Boyang Su, Leok Poh Chua, L. Chua, 2011, 2011 4th International Conference on Biomedical Engineering and Informatics (BMEI).

Design and parameter estimation of hybrid magnetic bearings for blood pump applications

Dongsheng Zhang, Xiaowei Wu, Leok Poh Chua, 2009 .

Investigation of flow characteristics of a magnetically suspended impeller of a centrifugal blood pump

Leok Poh Chua, W. K. Chan, Teruaki Akamatsu, 2000 .

Development of techniques for making an X-wire probe and building a data acquisition system to process the X-wire signals

Chang Yu Liu, Leok Poh Chua, 2000 .

Parameter estimation and actuator characteristics of hybrid magnetic bearings for axial flow blood pump applications.

Leok Poh Chua, Tau Meng Lim, Shanbao Cheng, 2009, Artificial organs.

Theoretical and experimental study of wind tunnel design parameters

Chang Yu Liu, Leok Poh Chua, Stephen Woon Tou Kwok, 1994 .

NUMERICAL STUDIES OF AN AXIAL FLOW BLOOD PUMP WITH DIFFERENT DIFFUSER DESIGNS

Leok Poh Chua, Boyang Su, Liang Zhong, 2013 .

Leakage flow measurements in a bio-centrifugal ventricular assist device model.

Tongming Zhou, Leok Poh Chua, Kang Shiu Ong, 2003, Artificial organs.

MODELS OF ORGANIZED MOTION IN THE NEAR-FIELD OF A CIRCULAR JET

R. A. Antonia, Leok Poh Chua, 1992 .

Investigation of ventricular assist device.

Yin Kwee Ng, Leok Poh Chua, Xiaoyang. Huang, 2003 .

Stochastic Estimation of Cavity Flowfield

Leok Poh Chua, Yin Yin Pey, Wei Long Siauw, 2012 .

A Numerical Simulation of a Bypass Conduit With Steady and Pulsatile Flow

Tongming Zhou, Leok Poh Chua, Simon C. M. Yu, 2003 .

Computational fluid dynamics of gap flow in a biocentrifugal blood pump.

Leok Poh Chua, Tau Meng Lim, Simon Ching Man Yu, 2005, Artificial organs.

Flow visualization and measurements of a square jet with mixing tabs

Leok Poh Chua, Simon C. M. Yu, Xikun Wang, 2003 .

Numerical study of a complete anastomosis model for the coronary artery bypass

Tongming Zhou, Leok Poh Chua, L. Chua, 2005 .

A Novel Coronary Artery Bypass Graft Design of Sequential Anastomoses

Dhanjoo N. Ghista, Leok Poh Chua, Foad Kabinejadian, 2010, Annals of Biomedical Engineering.

Measurements of a step cylinder

Leok Poh Chua, W. K. Chan, C. Y. Liu, 1998 .

Numerical Investigation of Blood Flow in a Sequential Aorto-Coronary Bypass Graft Model

Dhanjoo N. Ghista, Leok Poh Chua, Yong Seng Tan, 2006, 2006 International Conference of the IEEE Engineering in Medicine and Biology Society.

Dependence of the wake on inclination of a stationary cylinder

Tongming Zhou, Leok Poh Chua, Liang Cheng, 2009 .

Flow reversal and intermittency of a turbulent jet

R. A. Antonia, Leok Poh Chua, L. Chua, 1989 .

Numerical simulation of an axial blood pump.

Tongming Zhou, Boyang Su, Leok Poh Chua, 2007, Artificial organs.

Effects of scaling on centrifugal blood pumps.

Leok Poh Chua, Weng Kong Chan, S C M Yu, 2002, Artificial organs.

Numerical analysis of the inner flow field of a biocentrifugal blood pump.

Tongming Zhou, Leok Poh Chua, Tau Meng Lim, 2006, Artificial organs.

On the vorticity characteristics of lobe-forced mixer at different configurations

Tongming Zhou, Leok Poh Chua, Simon C. M. Yu, 2009 .

Numerical study of a bio-centrifugal blood pump with straight impeller blade profiles.

Leok Poh Chua, Tau Meng Lim, Guoliang Song, 2010, Artificial organs.

Validation of numerical simulation with PIV measurements for two anastomosis models.

Leok Poh Chua, Yong Seng Tan, L. Chua, 2008, Medical engineering & physics.

Validation of an axial flow blood pump: computational fluid dynamics results using particle image velocimetry.

Boyang Su, Leok Poh Chua, Xikun Wang, 2012, Artificial organs.

Leakage Flow Rate and Wall Shear Stress Distributions in a Biocentrifugal Ventricular Assist Device

Tongming Zhou, Leok Poh Chua, Ching Man Simon Yu, 2004, ASAIO journal.

CABG MODELS FLOW SIMULATION STUDY ON THE EFFECTS OF VALVE REMNANTS IN THE VENOUS GRAFT

Dhanjoo N. Ghista, Leok Poh Chua, Foad Kabinejadian, 2010 .