S. Liu

发表

A Study of the Microstructure, Texture and Tensile Properties of 1060/Al-TiC/1060 Sandwich Composites Prepared by Hot-Roll Bonding

W. C. Liu, Z. Wang, S. Liu, 2020, Metallurgical and Materials Transactions A.

Effects of electroplastic rolling on mechanical properties and microstructure of low-carbon martensitic steel

X. Zhang, L. Qian, S. Liu, 2021 .

Relationship between crystallographic structure of the Ti2O3/MnS complex inclusion and microstructure in the heat-affected zone (HAZ) in steel processed by oxide metallurgy route and impact toughness

R. Misra, C. Shang, S. Liu, 2015 .

The effect of phase parameter variation on hardness of P91 components after service exposures at 530–550 °C

Sheng Liu, S. Liu, C. Yang, 2018 .

Isolating contribution of individual phases during deformation of high strength–high toughness multi-phase pipeline steel

C. Shang, S. Liu, Shilong Liu, 2015 .

Effect of multi-walled carbon nanotube addition on the microstructures and mechanical properties of Ti(C,N)-based cermets

P. Wu, S. Liu, X. Jiang, 2018, Journal of Advanced Ceramics.

Prediction of the Al-rich part of the Al-Cu phase diagram using cluster expansion and statistical mechanics

J. Llorca, S. Liu, E. Mart'inez, 2020, 2005.03605.

Effects of AL addition on microstructure and mechanical properties of AlxCoCrFeNi High-entropy alloy

Yong Zhang, J. Xue, Shaoshuai Liu, 2015 .

Effects of antimony on eutectic silicon and fracture mode of A357 alloy at different cooling rates

S. Liu, G. Mao, Z. Wu, 2022, Materialwissenschaft und Werkstofftechnik.

First-principles analysis of precipitation in Mg-Zn alloys

J. Llorca, S. Liu, G. Esteban-Manzanares, 2020, 2009.01892.

Selective role of bainitic lath boundary in influencing slip systems and consequent deformation mechanisms and delamination in high-strength low-alloy steel

R. Misra, X. Wang, C. Shang, 2018 .

Low cycle fatigue behavior of René 80 at elevated temperature

S. Antolovich, Shih-Chun Liu, R. Baur, 1981 .

Microstructure development in the directionally solidified Al–4.0 wt% Cu alloy system

R. Trivedi, S. Liu, P. Mazumder, 2001 .

Effect of the electropulsing on mechanical properties and microstructure of an ECAPed AZ31 Mg alloy

Jingdong Guo, S. Liu, S. Yin, 2008 .

Dynamic effects in the lamellar–rod eutectic transition

R. Trivedi, J. Lee, S. Liu, 2011 .

Transformation characteristics of medium carbon V – Ti – N microalloyed steel for non-quenched/tempered oil well tubes

Guo-Quan Liu, S. Liu, Fei Wang, 2004 .

Isothermal Holding Treatment of a Transformation-Induced Plasticity Steel for Obtaining Ultrahigh Strength and High Plasticity

S. Liu, N. Jia, Y. Shen, 2021, Journal of Materials Engineering and Performance.

Microstructure evolution in directionally solidified Fe–18Cr stainless steels

S. K. Kim, J. Shin, J. Lee, 2005 .

First Principles Prediction of the Al-Li Phase Diagram

J. Llorca, S. Liu, G. Esteban-Manzanares, 2021, Metallurgical and Materials Transactions A.

Low-temperature die attach for power components: Cu-Sn-In solid-liquid interdiffusion bonding

M. Paulasto-Kröckel, V. Vuorinen, S. Liu, 2022, 2022 14th International Conference on Advanced Semiconductor Devices and Microsystems (ASDAM).

On the role of confinement on solidification in pure materials and binary alloys

R. Trivedi, J. Dantzig, S. Liu, 2006, cond-mat/0606388.

Onset of sidewise instability and cell–dendrite transition in directional solidification

R. Trivedi, S. Liu, J. Teng, 2009 .

First-principles analysis of the Al-rich corner of Al-Li-Cu phase diagram

J. Llorca, S. Liu, J. S. Wr'obel, 2022, Acta Materialia.

On the origin and contribution of extended kinks and jogs and stacking fault ribbons to deformation behavior in an ultrahigh strength cobalt-free maraging steel with high density of low lattice misfit precipitates

R. Misra, C. Shang, Yongfeng Shen, 2018, Materials Science and Engineering: A.

Research and Development of Reduced Activation Ferritic/Martensitic Steel CLF-1 at SWIP

Z. Y. Xu, J. Chen, S. Liu, 2010 .