B. Baudelet

发表

Effect of crack and cavity generation on tensile stability

J. Jonas, B. Baudelet, 1977 .

Model for the prediction of the mechanical behaviour of nanocrystalline materials

A. A. Nazarov, J. Lian, B. Baudelet, 1993 .

A modified Hall-Petch relationship for nanocrystalline materials

J. Lian, B. Baudelet, 1993 .

Structure and deformaton behaviour of Armco iron subjected to severe plastic deformation

R. Valiev, Y. Ivanisenko, E. Rauch, 1996 .

Rheological and metallurgical discussion of superplastic behaviour

M. Suéry, B. Baudelet, 1978 .

Physical Aspects of Superplastic Instability

M. Suéry, B. Baudelet, 1993 .

Yield loci for polycrystalline metals without texture

E. Aernoudt, B. Baudelet, J. Schmitt, 1985 .

Effect of a prestrain on the subsequent yielding of low carbon steel sheets: experiments and simulations

J. Raphanel, B. Baudelet, J. Schmitt, 1986 .

A micromechanical incremental modelling of damage in materials containing second phase particles

G. Canova, B. Baudelet, S. Favier, 1995 .

Analysis of damage and its influence on the plastic properties of copper

B. Baudelet, J. M. Jalinier, J. Schmitt, 1981 .

Determination of the relative density changes in the presence of high strain gradient

J. Lemaître, B. Baudelet, J. M. Jalinier, 1980 .

Flow stress in a material with liquid grain boundaries under different test conditions

J. Blandin, B. Baudelet, M. Dang, 1996 .

Compressive creep of polycrystalline ice containing a liquid phase

B. Baudelet, P. Duval, S. Chapelle, 1995 .

Percolation and damage behaviour in materials with liquid grain boundaries

B. Baudelet, F. Bordeaux, M. Dang, 1994 .

Mechanical behaviour, percolation and damage of materials with viscous solid grain boundaries

B. Baudelet, M. Dang, 1994, Journal of Materials Science.

Mechanical behaviour of an aluminium alloy with fusible grain boundaries

B. Baudelet, F. Bordeaux, M. Dang, 1992 .

A composite model for superplasticity

Bernard Baudelet, J. Lian, B. Baudelet, 1995, Journal of Materials Science.

Necking development and strain to fracture under uniaxial tension

Bernard Baudelet, J. Lian, B. Baudelet, 1986 .

Cementite dissolution in heavily cold drawn pearlitic steel wires

J. Languillaume, B. Baudelet, G. Kapelski, 1997 .

Microstructure and strain path in deep-drawing

B. Baudelet, F. Ronde-Oustau, 1977 .

Anelastic behaviour of the tin-lead eutectic alloy

B. Baudelet, C. Homer, 1977 .

Deformation behaviour of ultra-fine-grained copper

Ruslan Z. Valiev, A. A. Nazarov, R. Valiev, 1994 .

Microstructures and hardness of ultrafine-grained Ni3Al

A. A. Nazarov, R. Valiev, C. Esling, 1993 .

The Hall-Petch relation in submicro-grained Al-1.5% Mg alloy

R. Valiev, F. Chmelík, B. Baudelet, 1992 .

Two-phase (α/β)-brass bicrystals produced by a solid-solid diffusion method: I. Morphology and crystallographic relationships between the α-and β-phases

M. Suéry, B. Baudelet, A. Eberhardt, 1978 .

Interphase boundary sliding at high temperature in two-phase (α/β)-brass bicrystals

B. Baudelet, A. Eberhardt, 1980 .

Two-phase (α/β)-brass bicrystals produced by a solid-solid diffusion method: II. Diffusion-induced twins in the α-phase

S. Hashimoto, B. Baudelet, A. Eberhardt, 1978 .

Flow stress and microstructure in superplastic 60/40 brass

M. Suéry, B. Baudelet, 1973 .

Evolution of the tensile strength in heavily cold drawn and annealed pearlitic steel wires

B. Baudelet, G. Kapelski, J. Languillaume, 1997 .

Industrial aspects of superplasticity

B. Baudelet, 1991 .

Constant stress creep and constant true strain-rate tensile tests of the superplastic alloy PbSn

M. Suéry, B. Baudelet, 1972 .

Hydrodynamical behaviour of a two-phase superplastic alloy: α/β brass

B. Baudelet, M. S. And, 1980 .

A Superplasticity Approach Based on Shearing Bands

R. Dendievel, J. Blandin, B. Baudelet, 1996 .

A dislocation density approximation for the flow stress—grain size relation of polycrystals

J. Lian, B. Baudelet, Zhonghao Jiang, 1995 .

High temperature deformation of the Pb-Sn eutectic

M. Suéry, B. Baudelet, A. Eberhardt, 1977 .

Superplastic behaviour of two-phase Cu-P alloys

J. Jonas, B. Baudelet, G. Herriot, 1976 .

Theoretical and experimental constitutive equations of superplastic behaviour: discussion

M. Suéry, B. Baudelet, 1975 .

Superplastic behaviour of the industrial Cu7wt.%P alloy

M. Suéry, B. Baudelet, G. Herriot, 1972 .

Comparison and Contrast of Mechanisms, Microstructures, Ductilities in Superplasticity and Dynamic Recovery and Recrystallization

H. Mcqueen, B. Baudelet, 1979 .

Direct extrusion of rate-sensitive materials through conical dies

B. Baudelet, A. Ragab, 1977 .

On the migration of grain boundaries during sliding

B. Baudelet, S. Hashimoto, 1989 .

On the enhanced grain growth in ultrafine grained metals

R. Valiev, J. Lian, B. Baudelet, 1995 .

Dislocation Substructures and Yield Strength of Prestrained Low Carbon Steel Sheets

B. Baudelet, J. Schmitt, 1985 .

Simple shear deformation of iron-silicon single crystals

E. Rauch, B. Baudelet, S. Hashimoto, 1990 .

Macroscopic Strain Localization: Role of Microstructural Instabilities

G. L’espérance, A. Korbel, B. Baudelet, 1989 .

Forming limit diagrams and damage in mild steel

B. Baudelet, J. M. Jalinier, R. Argemi, 1978 .

Comparison of dislocation configurations produced by annealing in air, with those produced by annealing in vacuum, of aluminium crystals

B. Baudelet, G. Champier, M. Frémiot, 1968 .

Two-phase (α/β)-brass bicrystals with nearly uniform and thermodynamic equilibrium concentrations

S. Hashimoto, B. Baudelet, A. Eberhardt, 1980 .

Plane interphase boundary sliding in α/β brass

M. Suéry, B. Baudelet, A. Eberhardt, 1975 .

Long-range stress fields of disordered dislocation arrays: Two types of disorder, and two decay laws

A. Romanov, B. Baudelet, A. Nazarov, 1993 .

A Yield Function for Orthotropic Sheets under Plane Stress Conditions

Frédéric Barlat, F. Barlat, J. Lian, 1989 .

Recrystallization of 70/30 brass during induction heating

R. A. Harding, B. Baudelet, C. Homer, 1980 .

Roughening of the free surfaces of metallic sheets during stretch forming

Chen Guangnan, Bernard Baudelet, B. Baudelet, 1990 .

Process Modeling Applied to Metal Forming and Thermomechanical Processing

B. Andersson, J. Immarigeon, B. Baudelet, 1984 .

Forming limit curves: Out-of-plane and in-plane stretching

B. Baudelet, A. Ragab, 1982 .

Plastic behaviour and stretchability of sheet metals. Part II: Effect of yield surface shape on sheet forming limit

Frédéric Barlat, F. Barlat, J. Lian, 1989 .

A composite joint model for the creep constitutive law with grain boundary sliding

B. Baudelet, 1992 .

Numerical Analysis of the Influence of Various Defects on Superplastic Fracture Under Uniaxial Tension

M. Suéry, J. Lian, B. Baudelet, 1987 .

Forming limit diagram of sheet metal in the negative minor strain region

J. Lian, B. Baudelet, 1987 .

Phase Equilibria in the Zn-rich Corner of the Zn-Cu-Ti System

B. Baudelet, G. Kapelski, M. Durand-Charre, 1996 .

The creep behaviour of the ILZRO14 zinc alloy

B. Baudelet, G. Kapelski, M. Durand-Charre, 1996 .