J. Mayor

发表

Green Manufacturing and Sustainable Manufacturing Partnership Title Trajectory Generation in High-Speed , High-Precision Micromilling using Subdivision Surfaces Permalink

Angela A. Sodemann, Aaron M. Hoover, D. Dornfeld, 2010 .

Trajectory Generation in High-Speed, High-Precision Micromilling Using Subdivision Curves

Angela A. Sodemann, Aaron M. Hoover, D. Dornfeld, 2010 .

Stochastic Modeling of Microgrinding Wheel Topography

Jacob A. Kunz, J. Mayor, 2013 .

Stochastic Characteristics in Microgrinding Wheel Static Topography

Jacob A. Kunz, J. Mayor, 2014 .

Efficient Calculation of the Strand Eddy Current Loss Distributions in the End Stepped-Stator Region of Large Synchronous Generators

Thomas G. Habetler, J. Rhett Mayor, Sufei Li, 2018, 2018 IEEE Energy Conversion Congress and Exposition (ECCE).

Ionic Wind Heat Transfer Enhancement in Vertical Rectangular Channels: Experimental Study and Model Validation

F. Bonetto, J. Mayor, N. Gallandat, 2017 .

Microfeature Heat Exchanger Using Variable-Density Arrays for Near-Isothermal Cold-Plate Operation

J. Mayor, N. Gallandat, Daniel Hesse, 2016 .

Residence Time Influence on the Fast Pyrolysis of Loblolly Pine Biomass

J. Mayor, Alexander Williams, Alexander W. Williams, 2010 .

A Computer-Aided Design and Manufacturing Implementation of the Atomic Force Microscope Tip-Based Nanomachining Process for Two-Dimensional Patterning

E. Brousseau, J. Mayor, O. Gibaru, 2017 .

Novel Heat Sink Design Utilizing Ionic Wind for Efficient Passive Thermal Management of Grid-Scale Power Routers

J. Mayor, N. Gallandat, 2015 .

Practical considerations for the design and construction of a high speed SRM with a flux-bridge rotor

Thomas G. Habetler, Jose Restrepo, S. Andrew Semidey, 2014, European Conference on Cognitive Ergonomics.

High speed SRM control considering the inductance profile of a flux-bridge rotor

Jose Restrepo, S. Andrew Semidey, J. Rhett Mayor, 2015, 2015 IEEE International Electric Machines & Drives Conference (IEMDC).

Electromagnetic design considerations for a 50,000 rpm 1kW Switched Reluctance Machine using a flux bridge

Yi Du, Ronald Harley, J. Rhett Mayor, 2013, 2013 International Electric Machines & Drives Conference.

Design of a 750,000 rpm switched reluctance motor for micro machining

Ronald Harley, J. Rhett Mayor, Thomas Habetler, 2010, 2010 IEEE Energy Conversion Congress and Exposition.

A Microreactor System for the Analysis of the Fast Pyrolysis of Biomass

J. Mayor, Alexander W. Williams, J. Rhett Mayor, 2010 .

IN PRESS Interpolated Tool Path Actual Tool Path Sampling Instants Chord Error Fig . 1 . Chord error in trajectory generation

Angela A. Sodemann, Aaron M. Hoover, D. Dornfeld, 2010 .

Towards CNC Automation in AFM Probe-Based Nano Machining

Olivier Gibaru, J. Rhett Mayor, Emmanuel Bruno Jean Paul Brousseau, 2013 .

Generalized bearing roughness fault detection in claw-pole generators

Thomas G. Habetler, J. Rhett Mayor, Ronald G. Harley, 2013, 2013 IEEE Energy Conversion Congress and Exposition.

A static model of chip formation in microscale milling

Chang Ju Kim, Jun Ni, J. Rhett Mayor, 2004 .

Experimentation of an Electric Machine Technology Demonstrator Incorporating Direct Winding Heat Exchangers

S. Andrew Semidey, J. Rhett Mayor, S. A. Semidey, 2014, IEEE Transactions on Industrial Electronics.

Optimal electromagnetic-thermo-mechanical integrated design for surface mount permanent magnet machines considering load profiles

S. Andrew Semidey, J. Rhett Mayor, Ronald G. Harley, 2010, 2010 IEEE Energy Conversion Congress and Exposition.

Calculating the Electromagnetic Field and Losses in the End Region of a Large Synchronous Generator Under Different Operating Conditions With 3-D Transient Finite-Element Analysis

Thomas G. Habetler, Sufei Li, Ronald G. Harley, 2018, IEEE Transactions on Industry Applications.

A fast control-integrated and multiphysics-based multi-objective design optimization of switched reluctance machines

Shen Zhang, Thomas G. Habetler, J. Rhett Mayor, 2017, 2017 IEEE Energy Conversion Congress and Exposition (ECCE).

Applicability of an orthogonal cutting slip-line field model for the microscale

Quirico Semeraro, J. Rhett Mayor, Massimiliano Annoni, 2015 .

Fast Calculation of the Magnetic Field and Loss Distributions in the Stator Core End Packets and Finger Plates of Large Synchronous Generators

Thomas G. Habetler, J. Rhett Mayor, Sufei Li, 2018, 2018 IEEE Energy Conversion Congress and Exposition (ECCE).

Implementation of surface impedance boundary conditions in the quasi three-dimensional finite-difference simulations of generator end regions

J. Rhett Mayor, Sufei Li, Ronald G. Harley, 2017, International Electric Machines and Drives Conference.

Calculating the electromagnetic field and losses in the end region of large synchronous generators under different operating conditions with three-dimensional transient finite element analysis

J. Rhett Mayor, Sufei Li, Ronald G. Harley, 2016, 2016 IEEE Energy Conversion Congress and Exposition (ECCE).

Analyzing the impact of press plate structure on the flux and loss distributions in the end region of large generators by transient 3-dimensional finite-element method with an improved core loss model

J. Rhett Mayor, Sufei Li, Ronald G. Harley, 2017, 2017 IEEE International Electric Machines and Drives Conference (IEMDC).